訂單總金額超過 * S$200* 免運費

切削・研磨・測量用品

排序:
共 21,627 條結果, 第 91 - 120 條
顯示: 30 60 90
視圖: 網格視圖 列表視圖
拉杆螺栓
BIG DAISHOWA SEIKI (BIG)
5.00(1)
45.99 SGD
Type: Standard
分類 切削・研磨・測量用品 > 切削工具 > 刀柄 > 拉頭螺栓
No.36TL 超硬自由調節飛機開孔器長杆
STAR-M
4.00(2)
89.99 SGD
ADD TO CART
TRUSCO Part Number: 404-2824, Material: main unit :The common steel substitution blade: The super it is hard tip/chip attaching center drill: The super it is hard chip attaching, Hole Diameter (phi mm): 30 - 200, Shaft Diameter: 3 grooves 10, Revolution (min-1[r.p.m]): less than 600 , Drill Diameter (phi mm): 8, Hole Drilling Depth (mm): single-sided: 25-/both-sides: 50, Compatible Materials: Siding, wood, rigid construction materials, Compatible Tool: Electric drills, Purpose: Hard newly developed building material/siding board/plastic /FRP/ lumber
分類 切削・研磨・測量用品 > 切削工具 > 開孔器·空心鑽 > 開孔器 > 主要單位
手動絲錐(HT)#1
OSG
9.59 - 4,899.00 SGD
Chamfer Lcf: 9P
分類 切削・研磨・測量用品 > 切削工具 > 絲錐・板牙 > 絲錐 > 手敲
高輥龍頭(鋼)(HRT)
OSG
4.00(4)
12.99 - 28.99 SGD
Chamfer: 4P
分類 切削・研磨・測量用品 > 切削工具 > 絲錐・板牙 > 絲錐 > 擠壓絲錐
美式管用絲錐 錐形螺紋
YAMAWA MFG
5.00(7)
39.99 - 489.90 SGD
Chamfer: 3P
分類 切削・研磨・測量用品 > 切削工具 > 絲錐・板牙 > 絲錐 > 管用絲錐
金屬鋸
Okazaki Seiko
5.00(1)
69.99 - 109.90 SGD
Outside Diameter D (phi mm): 100, Hole Diameter d (phi mm): 25.4
分類 切削・研磨・測量用品 > 切削工具 > 切斷/槽加工 > 金屬鋸片
GC矩形朝日虎印刀具用磨刀石
SUN TIGER
4.00(1)
43.99 SGD
ADD TO CART
Grain Size: #240, #240, Dimension (mm): 205x75x50, 205x75x50, TKG Part Number (2015): 5-0289-0601
分類 切削・研磨・測量用品 > 磨料 > 手動研磨 > 磨刀石 > 方形磨石
表面修正砂輪[帶槽]
NANIWA (Naniwa Abrasive Mfg)
24.99 SGD
ADD TO CART
Grain Size: #60, #60, Abrasive Material: silicon carbide, Silicon carbide, Weight (g): 500, 500, Grinding Stone Size (mm): 170x55x30, 170x55x30, TKG Part Number (2015): 5-0292-0301
分類 切削・研磨・測量用品 > 磨料 > 手動研磨 > 磨刀石 > 方形磨石
空氣冷卻槍(1根噴嘴套件)
TRUSCO
299.90 SGD
ADD TO CART
Accessories: Hose nipple, TRUSCO Part Number: 220-3669, Weight (g): 450, Working Pressure (MPa): 0.2 - 0.5, Air Consumption (L/min): 190 - 440, Fluid: Air, Air Connnection: R1/4(PT1/4), Discharge Outlet: 1/8, Purpose: Blade cooling during cutting and cooling of workpiece material, etc.
分類 切削・研磨・測量用品 > 切削工具 > 切削液用品 > 空氣式
除鏽擦
H&H
3.78(9)
7.79 - 15.99 SGD
Purpose: [Coarse type] For rust and singe of grill, gas range and pan. Potent stain and corrosion caused by aging deterioration on bikes and cars. Joint of tubs mildew and dirt etc. Floor dirt and rust on doors. Remover of stain and rust of machine tools such as g, [Coarse type] For rust and singe of grill, gas range and pan. Potent stain and corrosion caused by aging deterioration on bikes and cars. Joint of tubs mildew and dirt etc. Floor dirt and rust on doors. Remover of stain and rust of machine tools such as grinders and drills, etc. Remove much tough stains, rust and corrosion. [Middle type] remove rust of kitchen knives, knives, scissors, etc. Dirt and rust on metal sinks, faucets, toilet etc. Dirt on bike and aluminum rims. Peeling paint and adhesive glue remaining etc. Corrosion ...
分類 切削・研磨・測量用品 > 磨料 > 手動研磨 > 拋光膏 > 化合物
倒角刀
NT Tool
28.99 - 89.99 SGD
Blade Angle a (degree): 90
分類 切削・研磨・測量用品 > 切削工具 > 倒角・去毛刺 > 倒角刀 > 刀具
TOKUUSU切割片
Heiwa Technica
229.90 SGD
ADD TO CART
Grain Size: 100, Thickness (mm): 1, Hole Diameter (phi mm): 25.4, Outer Diameter (phi mm): 150, Abrasive Grain: Alumina, Bond: Resinoid bond, Main Cutting Material: General carbon steel (SKS), die steel (SKD), mild steel (SS), Coupling: N
分類 切削・研磨・測量用品 > 磨料 > 切割輪 > 金屬用
Scotch Brite 工業用研磨墊8447
ThreeM 3M
4.00(2)
59.99 SGD
ADD TO CART
TRUSCO Part Number: 126-6357, 126-6357, Grain Size: 280, 280, Thickness (mm): around 10, About 10, Dimension (mm): 150x230, 150x230, Color: reddish brown, Reddish brown, Abrasive Material: A (aluminium oxide), A (Aluminum Oxide), Structure of Abrasives: Nonwoven fabric, Non-woven fabric, Grade: F, F, Purpose: Removal of foreign material contamination, Removal of foreign material contamination
分類 切削・研磨・測量用品 > 磨料 > 手動研磨 > 拋光砂紙 > 帶磨料的薄紙
單石鑽石 修整器
TRUSCO
57.99 - 139.90 SGD
Specification: Use pointed sharp small gemstones to work requiring accuracy, Purpose: Dressing of the grinding wheel being used for grinding general. Removal of grinding layer clogged on grinding surface dressing., Dressing of the grinding wheel being used for grinding general. Removal of grinding layer clogged on grinding surface dressing., Caution: For large dress amount work, use larger round point., For large dress amount work, use larger round point.
分類 切削・研磨・測量用品 > 磨料 > 手動研磨 > 梳妝台
用於木工的傾翻鋸
MonotaRO
8.79 - 9.79 SGD
Hole Diameter (phi mm): 20
分類 切削・研磨・測量用品 > 磨料 > 切斷機用鋸片
角磨片1號平型 A
SUN TIGER
3.25(4)
10.99 - 48.99 SGD
Abrasive Material: A, Bond: Vitrified bond, Purpose: general steel that does not have a large extent of quenching, Caution: 255x25x19.05 and 205x19x15.88 are type with an adjusted hole diameter in the bush
分類 切削・研磨・測量用品 > 磨料 > 砂輪機砂輪 > 平砂輪
管刷螺旋型
TRUSCO
3.00(2)
11.99 - 17.99 SGD
Material: Wire
分類 切削・研磨・測量用品 > 磨料 > 手動研磨 > 手動刷 > 內徑刷子
4面刃 中心切削短立銑刀
MonotaRO
13.99 - 46.99 SGD
分類 切削・研磨・測量用品 > 切削工具 > 立銑刀 > 方形立銑刀
方形砂輪 制陶工作石
NANIWA (Naniwa Abrasive Mfg)
5.00(1)
33.99 - 59.99 SGD
Material (Unit): Natural rubber
分類 切削・研磨・測量用品 > 磨料 > 手動研磨 > 磨刀石 > 方形磨石
超級愛秀麗砂紙 橙色(Super Assilex Orange)
KOVAX
4.50(4)
64.99 - 87.99 SGD
Grain Size: 1200-1500 No. equivalent, Purpose: Car repair, old paint film part (color base graded section, clear block painted part), sanding before paint, various resin polishing, metal base, paint polishing, woodwork paint., Caution: Disk should be attached on SUPER ASHIRE PAD(MW) and used for dry sanding. Sheet be attached on dedicated SUPER ASHIRE PAD(MH),(MO) and used for dry sanding. Remove dust and dirt from work surface before operation.
分類 切削・研磨・測量用品 > 磨料 > 打磨機·研磨機用研磨品 > 薄片類型
鑽頭刀杆
BIG DAISHOWA SEIKI (BIG)
149.90 - 159.90 SGD
Purpose: For drill tapper (DT24, DT33)
分類 切削・研磨・測量用品 > 切削工具 > 刀柄 > 持有人 > 鑽頭夾持器
迷你切削液用萬向軟管
NOGA
4.80(5)
279.90 - 339.90 SGD
Specification: With 28 kgf. permanent magnet, Length (m): Siphon line/1, Air line/1, Air Connnection: PF1/4, Magnet Dimensions (mm): 60x16x32, Use Air Pressure (MPa [kg/cm2]): 0.098 - 0.98[1 - 10], Purpose: Refueling. for machining, drilling, milling, lathe, grinding machine.
分類 切削・研磨・測量用品 > 切削工具 > 切削液用品 > 空氣式
鑽孔絲錐
ISHIHASHI SEIKO
5.00(1)
46.99 - 119.90 SGD
分類 切削・研磨・測量用品 > 切削工具 > 絲錐・板牙 > 絲錐 > 鑽攻一體絲錐
油石中紋(氧化鋁磨粒方形)
Yamato Seitosho
5.00(2)
16.99 - 48.99 SGD
分類 切削・研磨・測量用品 > 磨料 > 手動研磨 > 磨刀石 > 方形磨石
ACCU-C10用彈簧
BIG DAISHOWA SEIKI (BIG)
3.00(1)
32.99 SGD
ADD TO CART
Compatible: ACCU-C10
分類 切削・研磨・測量用品 > 切削工具 > 刀柄 > 備品
鉗工用金剛石銼刀 平銼
TRUSCO
4.00(3)
39.99 - 73.99 SGD
Grain Size: 140, 140, Handle Shape: Flat, Purpose: Ideal for grinding of all types of blades, glass, ceramics, for finishing, correction, R picking of all types of metals, and all hard material., Ideal for grinding of all types of blades, glass, ceramics, for finishing, correction, R picking of all types of metals, and all hard material., Caution: 8 piece set, 10 piece set represents the size of the file, it doesn't mean that there are 5 pieces of files, 8 pieces of files, 10 pieces of files, 12 pieces of files., 8 piece set, 10 piece set represents the size of the file, it doesn't mean that there are 5 pieces of files, 8 pieces of files, 10 pieces of files, 12 pieces of files.
分類 切削・研磨・測量用品 > 磨料 > 手動研磨 > 銼刀 > 金剛石銼刀
砂紙
BELL STAR ABRASIVE MFG
5.00(2)
64.99 - 129.90 SGD
Abrasive Material: aluminum, Aluminum, Purpose: For vehicles, vessels, structural steel, metal furniture, bronze furniture, equipment, exterior, etc., For vehicles, vessels, structural steel, metal furniture, bronze furniture, equipment, exterior, etc.
分類 切削・研磨・測量用品 > 磨料 > 手動研磨 > 拋光砂紙 > 紙布
拋光布
RIKEN CORUNDUM
67.99 - 98.99 SGD
Sheet Size (mm): 228x280, 228x280, Abrasive Grain: A, A, Purpose: Suitable for manual polish in all fields, such as metal, wood, and rubber., Suitable for manual polish in all fields, such as metal, wood, and rubber., Caution: Since glue is used for the adhesive bond, there is no water resistance., Since glue is used for the adhesive bond, there is no water resistance.
分類 切削・研磨・測量用品 > 磨料 > 手動研磨 > 拋光砂紙 > 紙布
帶式鋸床用鋸條
Funasaw
129.90 - 139.90 SGD
Thickness (mm): 0.635, Length (m): 30
分類 切削・研磨・測量用品 > 切削工具 > 帶鋸/鋸片(鋸條) > 帶鋸 > 線圈帶鋸
斷絲取出器組合裝(方型)
TRUSCO
4.50(2)
47.99 - 149.90 SGD
Application: To pull out broken bolts and pipes., Material: S45C
分類 切削・研磨・測量用品 > 切削工具 > 提取 > 套件

1 2 3 4 5 6 7 8 9 10 ...721