切削・研磨・測量用品

Compatible Power Tool: Portable power tools, Outside Diameter D (phi mm): 102, Diamond Layer Thickness (T) (mm): 18, Bore Diameter H (phi mm): 20, Attached Ring Bore Diameter (phi mm): 15, Dimensions (inch): 4, Diamond Layer Width (X)(mm): 4.5

Abrasive Grain: A (brown alumina), A (brown alumina), Purpose: Uses many different metallic objects in its blades, so polishes and treats many non metal objects effectively and has a wide area of use, Uses many different metallic objects in its blades, so polishes and treats many non metal objects effectively and has a wide area of use

Grain Size: 36, Thickness (mm): 2, Abrasive Material: WA, Hole Diameter (phi mm): 15, Hardness: P, Outer Diameter (phi mm): 100, Bond: BAF, Maximum Operating Speed (m/min): 72, Purpose: Cutting of a lightweight stainless steel material (a pipe and a round bar) etc.

Material: Chromium molybdenum (finishing of heat treating), Overall Length (mm): NO.1:54 NO.2:60 NO.3:69 NO.4:78 NO.5:84, Bolt Screw Dimensions: NO.1:1/8-1/4(3mm-6mm) NO.2:1/4-5/16(6mm-8mm) NO.3:5/16-7/16(8mm-11mm) NO.4:7/16-9/16(11mm-14mm) NO.5:9/16-3/4(14mm-18mm), Pilot Hole Drill Dimensions: NO.1:5/64(2mm) NO.2:7/64(2.7mm) NO.3:5/32(4mm) NO.4:1/4(6mm) NO.5:19/64(7.5mm), Opposite Side Angle Dimensions (mm): Shank No.1:3.9 No.2:4.7 No.3:6.2 No.4:7.8 No.5:10.9, Hardness HRC: 46-50, Purpose: To remove broken bolt, To remove broken bolt, Caution: it may be broken due to unreasonable power it can not be used for heat-treated bolts, it may be broken due to unreasonable power it can not be used for heat-treated bolts

Thickness (mm): 5, 5, Dimension (mm): 114x140, 114x140, Purpose: Final polishing of wood furniture, etc. Metal painted skin polishing Paint film exfoliation work Hair line Stains from pottery etc., Final polishing of wood furniture, etc. Metal painted skin polishing Paint film exfoliation work Hair line Stains from pottery etc.

Abrasive Material: AA

Dimension (mm): 230x280, 230x280, Abrasive Material: WA, WA, Purpose: For removing the scratches on plastics, metal and painted surfaces.for pre-finishing compound and polishing.for optical fiber endface, precious metal clay, metal mold polishing.For Specimen analysis, etc., For removing the scratches on plastics, metal and painted surfaces.for pre-finishing compound and polishing.for optical fiber endface, precious metal clay, metal mold polishing.For Specimen analysis, etc.

Caution: It is not suitable for the use with the horizontal machine.

Abrasive Material: silicon carbide, Silicon carbide, Purpose: For metal coated surfaces, woodwork fabric, etc., For metal coated surfaces, woodwork fabric, etc., For metal coated surfaces, woodwork fabric, etc., For metal coated surfaces, woodwork fabric, etc.

TRUSCO Part Number: 137-8678, Stroke (mm): 3, Weight (ｋg): 0.24, Overall Height (mm): 50, Detection Method: Internal contact point method, Measuring Plane (mm): phi14, Body Size (phi mm): 42.5, Batteries: SR44x2, Battery Life (continuous use): 10, Material (measuring surface): Ceramics, Purpose: For electrically conducting cutting tools, workpiece and machine

Material (Unit): Aluminum, Dimensions (Vetical x Horizontal x Thickness) (mm): 200x75x15, 200x75x15, Grinding Wheel Thickness (mm): About 1 (green), Purpose: From household knives to cemented carbide, stubborn blades can also be sharpened.(Kitchen knife, canna, knife, chisel etc), From household knives to cemented carbide, stubborn blades can also be sharpened.(Kitchen knife, canna, knife, chisel etc)

Set Contents: Tap M3 x 0.5 and 3 x 0.6 M and M 4 x 0.7 and 4 x 0.75 M and M 5 x 0.8 and 5 x 0.9 M and 6 x 1.0 M and 7 x 1.0 M and M 8 x 1.25 and 9 x 1.25 M and 10 x 1.0 M and M 10 x 1.25 and M 10 x 1.5 and M 12 x 1.25 and M 12 x 1.5 and M 12 x 1.75 and M 14 x 1.5 / , Caution: Case may be difrerent

Material: High carbon tool steel, Width (mm): 13, Caution: Not for stainless cutting

Outside Diameter D (phi mm): 18, Length L(mm): 28

Hardness: 6.5 (new Mohs) HV600 (Vickers hardness), Specific Gravity: True specific gravity / bulk specific gravity 1.6/2.5

Dimension (mm): 210x70x15, 210x70x15, Caution: Before you use K0711(# 30000), make sure to polish it with K0710(# 8000)., Before you use K0711(# 30000), make sure to polish it with K0710(# 8000).

Material: High-Vanadium Heiss (High speed steel) HSSE, Coating: TiN coating

Thickness (mm): 3

TRUSCO Part Number: 126-6381, 126-6381, Grain Size: 400, 400, Thickness (mm): around 10, About 10, Dimension (mm): 150x230, 150 x 230, Color: green, Green, Abrasive Material: S (silicon carbide), S (silicon carbide), Structure of Abrasives: Nonwoven fabric, Non-woven fabric, Grade: SF, SF, Purpose: Fine finishing, Fine finishing

Grain Size: 120, Thickness (mm): 1.2, Hole Diameter (phi mm): 31.75, Outer Diameter (phi mm): 255, Bond: B, Coupling: N, Tolerance of Outside Diameter (mm): +/-1.5, Thickness Tolerance (mm): +/-0.15, Abrasive: WA, Purpose: SUITABLE FOR LICENSED CUTTING OPERATIONS OF ALLOY TOOL STEEL (SKS), (SUJ) BEARING STEEL, HIGH SPEED STEEL (SKH), STAINLESS STEEL (SUS), ETC.

Compatible Body: K-104, Type: Metalwork for, Material: High-speed steel, Overall Length (mm): 50, Drill Diameter (phi mm): 5, Drilling Range (mm): 20 - 76

Shank Diameter Tolerance: h7

TRUSCO Part Number: 137-8660, Stroke (mm): 3, Weight (ｋg): 0.23, Overall Height (mm): 50, Detection Method: Electrification system, Measuring Plane (mm): phi18, Body Size (phi mm): 42.5, Batteries: SR44x2, Battery Life (continuous use): 10, Material (measuring surface): Steel, Purpose: For electrically conducting cutting tools, workpiece and machine

Material: Ordinary steel, Dimension (mm): 9, Overall Length (mm): 74, Usage Tool: Impact driver, electric drill, Shank Diameter (mm): Hexagonal axis 6.35, Appropriate Rotation Number (rotation/min): 3000 following, Purpose: Bog wood from same tree. For wood material.

Surface Processing: Tin Coating

Grain Size: #60, #60, Abrasive Material: silicon carbide, Silicon carbide, Weight (g): 500, 500, Grinding Stone Size (mm): 170x55x30, 170x55x30, TKG Part Number (2015): 5-0292-0301