訂單總金額超過 * S$200* 免運費

油更換器,排油管

排序:
共 10 條結果, 第 1 - 10 條
顯示: 30 60 90
視圖: 網格視圖 列表視圖
手動・氣壓通用便攜抽油器
MonotaRO
279.90 SGD
ADD TO CART
Accessories: Main hose One (1500mm) / suction nozzle This 4 (Phi9.5x430mm: transparent / Phi6x780mm: milky white / Phi6x780mm: Blue / Phi7x930mm: Black / plug (1/4 coupler 20PM type), Weight (kg): 4.5, Tank Capacity (L): 9.5 (usable capacity), Working Pressure (MPa): 0.5-0.8, Body Dimensions (Width x Depth x Height) (mm): 315x265x650, Heat-Resistant Temperature (deg C): 60 (body), Manual: manual , Purpose: Extraction of engine oil and brake oil, Extraction of engine oil and brake oil, Caution: * There is a case that can not be used depending on the model of car. Do not suck the oil more than 9.5L in a tank. It causes the failure. * Wash the hose and dry it after using, otherwise degradation of hose is accelerated., * There is a case that can not be used depending on the model of car. Do ...
分類 油更換器,排油管
可攜式機油交換機(PA-1011A)用抽吸軟管
No Brand
2.25(4)
35.99 - 85.99 SGD
分類 油更換器,排油管
手動式便攜油交換器
MonotaRO
149.90 SGD
ADD TO CART
Compatible: Greater than the level gauge hole diameter is 6mm car / bike, Type: Negative pressure, Tank Capacity (L): 9, Actuation: For manual, Tube Overall Length (m): 1.1, Caution: * When doing treatment of waste oil accumulated in the tank, there are the case of oil leakage from the bottom of body if make the body to lay down too much, oil enters the hand pump part. * Use for the oil temperature is 80 degree C or less. * Can not us, * When doing treatment of waste oil accumulated in the tank, there are the case of oil leakage from the bottom of body if make the body to lay down too much, oil enters the hand pump part. * Use for the oil temperature is 80 degree C or less. * Can not use for hole diameter of the oil level gauge which is 6mm and less. * It is not possible to discharge of br...
分類 油更換器,排油管
發動機油提取機
KOTO
959.90 SGD
ADD TO CART
Caution: This product is manufactured in Japanese standards. Please check the specification before you order.
分類 油更換器,排油管
Oil changer air type
JTC
359.90 SGD
ADD TO CART
Capacity (L): 8.5, Hose Diameter (phi mm): 10phix1500, Nozzle Diameter (phi mm): 4.5phix1000/6.5phix1000, Caution: This product is manufactured in Japanese standards. Please check the specification before you order.
分類 油更換器,排油管
6.5L oil changer
ESCO
259.90 SGD
ADD TO CART
ESCO Part Number: EA992DB-3, Caution: *This product is manufactured in Japanese standards. Please check the specification before you order.
分類 油更換器,排油管
吸入軟管安裝部件,用於便攜式換油器O型圈
No Brand
1.49 SGD
ADD TO CART
Compatible: PA-1011A, Caution: This product is manufactured in Japanese standards. Please check the specification before you order.
分類 油更換器,排油管
9.5L oil pump(air manual combined use)
ESCO
429.90 SGD
ADD TO CART
ESCO Part Number: EA991CR-10, Caution: *This product is manufactured in Japanese standards. Please check the specification before you order.
分類 油更換器,排油管
Oil changer
JTC
449.90 SGD
ADD TO CART
Tank Capacity (L): 10, Air Pressure (MPa): 40-170psi,2.8-12kg/cm2 ,2.8-12BAR, Caution: This product is manufactured in Japanese standards. Please check the specification before you order.
分類 油更換器,排油管
10L oil changer
ESCO
-
ESCO Part Number: EA991CR-1, Caution: *This product is manufactured in Japanese standards. Please check the specification before you order.
分類 油更換器,排油管

1