訂單總金額超過 * S$200* 免運費

石油設備

排序:
共 138 條結果, 第 1 - 30 條
顯示: 30 60 90
視圖: 網格視圖 列表視圖
桶用泵
No Brand
88.99 - 96.99 SGD
Discharge Capacity: 1 stroke 60cc
分類 石油設備 > 油泵
鐵桶支架
Ohtsuka Brush Mfg
3.50(4)
229.90 SGD
分類 石油設備 > 油臺架
桶用水龍頭
AQUA SYSTEM
159.90 - 649.90 SGD
Discharge Caliber (phi mm): 41, Purpose: For work to divide liquid into smaller.
分類 石油設備 > 潤滑設備
Oil Replacement Sticker
MonotaRO
11.99 SGD
ADD TO CART
Dimensions (Horizontal x Vetical) (mm): 55x35
分類 石油設備 > 油污處理
Round type Khan stand with 1 caster for can
Rikimaeda
1.00(1)
169.90 SGD
ADD TO CART
Weight (g): 2000, Dimensions (Height H x Width W x Depth D) (mm): 750x410x430
分類 石油設備 > 油臺架
平角角汗站1個腳輪用於罐頭
Rikimaeda
199.90 SGD
ADD TO CART
Weight (g): 2600, Dimensions (Height H x Width W x Depth D) (mm): 750x410x430, Caution: This product is manufactured in Japanese standards. Please check the specification before you order.
分類 石油設備 > 油臺架
Drum Can Waste Oil Funnel
MonotaRO
89.99 SGD
ADD TO CART
Material: PP (polypropylene), Weight (kg): 1.68, Capacity (L): 20, Dimensions (Diameter phi x Height H) (mm): 600x155, Heat-Resistant Temperature (deg C): 93
分類 石油設備 > 油污處理
Handy Oil Funnel
MonotaRO
2.59 SGD
ADD TO CART
Material: PP, Dimension (mm): 45x45x100, Color: Yellow, Weight (g): About 10, Caliber (phi mm): About 22
分類 石油設備 > 潤滑設備
Drum Can Plug Opener
MonotaRO
38.99 SGD
ADD TO CART
Material: Aluminum, Width (mm): 105, Thickness (mm): 52, Overall Length (mm): 380, Weight (g): 420
分類 石油設備 > 潤滑設備
桶用泵S
AQUA SYSTEM
4.50(4)
129.90 SGD
ADD TO CART
TRUSCO Part Number: 111-4514, Material: Steel chromium plating (body) nylon (packing) vinyl chloride (discharge hose), Weight (kg): 1.0, Maximum Discharge Amount: 200cc / stroke, Viscosity: 10000cp below (ISO68) up to about), Hose Dimension (mm): 12x350, 2014 TRUSCO Published Page: 2-2249, 2015 Trusco Published Pages: 3 1439, Caution: * Not for gas, etc., * Not for gas, etc.
分類 石油設備 > 油泵
金屬制方罐適用閥
Miyasaka Kougyou
98.99 SGD
Dimension (mm): 70x55x150, Connection Diameter: JISB type cap phi40, Weight (g): 290, Valve Type: Ball valve (full bore), Compatible Outside Diameter (phi mm): 40 exclusive use, Valve Diameter (phi mm): 15 (1/2), Port Size (phimm): JIS type cap 40, Purpose: Oil, water, detergent, alcohol, and others, Caution: So if you install the oil filler plug "cokkun" the can will be hermetically sealed that's why you must open the air vent on the can surface. Not use solvents such as thinner, trichloroethylene. Not use with volatile type oils such as gasoline and
分類 石油設備 > 潤滑設備
O環
Miyasaka Kougyou
1.00(1)
7.99 SGD
ADD TO CART
Compatible Models: MWC-40BS, Caution: This product is manufactured in Japanese standards. Please check the specification before you order.
分類 石油設備 > 潤滑設備
Oil Tray
MonotaRO
48.99 SGD
ADD TO CART
Description: It is most suitable for the oil change of trucks and buses in large capacity, Application: In trucks and buses, Material: Polyethylene, Weight (kg): 1.8, Capacity (L): 24, Dimensions (Height x Width x Depth)(mm): 200x550x810
分類 石油設備 > 油污處理
一罐可桶·達芙妮樹脂可以共享立式鐵
Miyasaka Kougyou
459.90 SGD
ADD TO CART
Caution: This product is manufactured in Japanese standards. Please check the specification before you order.
分類 石油設備 > 潤滑設備
滾筒適配器
Miyasaka Kougyou
199.90 SGD
ADD TO CART
TRUSCO Part Number: 437-1984, Caution: This product is manufactured in Japanese standards. Please check the specification before you order.
分類 石油設備 > 潤滑設備
手動式便攜油交換器
MonotaRO
149.90 SGD
ADD TO CART
Compatible: Greater than the level gauge hole diameter is 6mm car / bike, Type: Negative pressure, Tank Capacity (L): 9, Actuation: For manual, Tube Overall Length (m): 1.1, Caution: * When doing treatment of waste oil accumulated in the tank, there are the case of oil leakage from the bottom of body if make the body to lay down too much, oil enters the hand pump part. * Use for the oil temperature is 80 degree C or less. * Can not us, * When doing treatment of waste oil accumulated in the tank, there are the case of oil leakage from the bottom of body if make the body to lay down too much, oil enters the hand pump part. * Use for the oil temperature is 80 degree C or less. * Can not use for hole diameter of the oil level gauge which is 6mm and less. * It is not possible to discharge of br...
分類 石油設備 > 油更換器,排油管
Kokun SUS型
Miyasaka Kougyou
4.00(1)
599.90 SGD
ADD TO CART
TRUSCO Part Number: 437-2131, Weight (g): 610, Dimensions (Height H x Width W x Depth D) (mm): 70mmx55mmx150mm, Caution: This product is manufactured in Japanese standards. Please check the specification before you order.
分類 石油設備 > 潤滑設備
Kokun B型Viton規格
Miyasaka Kougyou
4.00(1)
119.90 SGD
Weight (g): 290, Width x Overall Length (mm): 55x130, Caution: This product is manufactured in Japanese standards. Please check the specification before you order.
分類 石油設備 > 潤滑設備
手動・氣壓通用便攜抽油器
MonotaRO
279.90 SGD
ADD TO CART
Accessories: Main hose One (1500mm) / suction nozzle This 4 (Phi9.5x430mm: transparent / Phi6x780mm: milky white / Phi6x780mm: Blue / Phi7x930mm: Black / plug (1/4 coupler 20PM type), Weight (kg): 4.5, Tank Capacity (L): 9.5 (usable capacity), Working Pressure (MPa): 0.5-0.8, Body Dimensions (Width x Depth x Height) (mm): 315x265x650, Heat-Resistant Temperature (deg C): 60 (body), Manual: manual , Purpose: Extraction of engine oil and brake oil, Extraction of engine oil and brake oil, Caution: * There is a case that can not be used depending on the model of car. Do not suck the oil more than 9.5L in a tank. It causes the failure. * Wash the hose and dry it after using, otherwise degradation of hose is accelerated., * There is a case that can not be used depending on the model of car. Do ...
分類 石油設備 > 油更換器,排油管
Gasoline carrying can
OHASHI (BAL)
5.00(3)
45.99 - 58.99 SGD
Material: SPC, Plate Thickness (mm): 0.8
分類 石油設備 > 汽油罐
Filler cap
OHASHI (BAL)
9.79 SGD
ADD TO CART
Material: SPC, Weight (g): 45, Dimensions (Width W x Height H) (mm): 62x17.5
分類 石油設備 > 汽油罐
排氣調節螺釘
OHASHI (BAL)
7.99 SGD
ADD TO CART
Material: SS330, Weight (g): 28, Dimensions (Width W x Height H) (mm): 36x36.5, Caution: This product is manufactured in Japanese standards. Please check the specification before you order.
分類 石油設備 > 汽油罐
Nozzle mounting bracket
OHASHI (BAL)
11.99 SGD
ADD TO CART
Material: SPC, Weight (g): 34, Dimensions (Width W x Height H) (mm): 62x16.5
分類 石油設備 > 汽油罐
Filling nozzle
OHASHI (BAL)
2.00(2)
6.49 SGD
ADD TO CART
Material: LLDPE, Weight (g): 24, Dimensions (Width W x Height H) (mm): phi42x297
分類 石油設備 > 汽油罐
Packing set
OHASHI (BAL)
3.00(1)
4.89 SGD
ADD TO CART
Material: NBR, Weight (g): 8
分類 石油設備 > 汽油罐
樹脂制潤滑旋塞排隊
TRUSCO
47.99 - 63.99 SGD
Height (mm): 110, Depth (mm): 140
分類 石油設備 > 潤滑設備
Coolant filler set
NIPPEI KIKI
4.00(3)
67.99 SGD
ADD TO CART
TRUSCO Part Number: 783-9243, Weight (g): 580, Tank Capacity (L): 2
分類 石油設備 > 潤滑設備
工業氣孔蓋沖頭套
Miyasaka Kougyou
8.59 SGD
ADD TO CART
Caution: This product is manufactured in Japanese standards. Please check the specification before you order., This product is manufactured in Japanese standards. Please check the specification before you order.
分類 石油設備 > 潤滑設備
Kokkun安裝段增強型
Miyasaka Kougyou
5.00(1)
329.90 SGD
分類 石油設備 > 潤滑設備
Oil Tray
MonotaRO
22.99 SGD
ADD TO CART
Material: Polyethylene, Polyethylene, Weight (kg): 0.9, 0.9, 0.9, Capacity (L): 16, 16, 16, Dimensions (Height H x Width W x Depth D) (mm): 150x450x580, 150x450x580, 150x450x580, Purpose: For Truck., Caution: Do not use for gasoline.
分類 石油設備 > 油污處理

1 2 3 4 5