Caution: So if you install the oil filler plug "cokkun" the can will be hermetically sealed that's why you must open the air vent on the can surface.
Not use solvents such as thinner, trichloroethylene.
Not use with volatile type oils such as gasoline and , Purpose: Oil, water, detergent, alcohol, and others, Port Size (phimm): JIS type cap 40, Valve Diameter (phi mm): 15 (1/2), Compatible Outside Diameter (phi mm): 40 exclusive use, Valve Type: Ball valve (full bore), Weight (g): 290, Connection Diameter: JISB type cap phi40, Dimension (mm): 70x55x150
Refrigerant: R134a, Dimension / Size (mm): About 7.0 height About 9.1x outer diameter inner diameter About 5.0x , Usage: One side of hose connection mouth includes valve core pusher. Screw in service port which contains valve core. The other side must be screwed in service port without valve core., ESCO Part Number: EA104PA-13, Compatible: M10xP1.5 hose
Caution: * When doing treatment of waste oil accumulated in the tank, there are the case of oil leakage from the bottom of body if make the body to lay down too much, oil enters the hand pump part. * Use for the oil temperature is 80 degree C or less. * Can not us, * When doing treatment of waste oil accumulated in the tank, there are the case of oil leakage from the bottom of body if make the body to lay down too much, oil enters the hand pump part. * Use for the oil temperature is 80 degree C or less. * Can not use for hole diameter of the oil level gauge which is 6mm and less. * It is not possible to discharge of brake oil. * Make negative pressure higher as possible at the first time of pumping. Standard is about 10 times. * Please be pumping again if the negative pressure fall down. *...
Caution: This product is manufactured in Japanese standards. Please check the specification before you order., Gauge Diameter (phi mm): 80, Coolant: R134a, Dimensions (Width W x Height H) (mm): 170x225