訂單總金額超過 * S$200* 免運費

帶軸磨頭

排序:
共 3,388 條結果, 第 1 - 30 條
顯示: 30 60 90
視圖: 網格視圖 列表視圖
衝擊扳手用帶柄毛氈研磨輪(六角軸)
YANASE
5.00(9)
8.59 - 13.99 SGD
Hexagon Opposite Side(mm): 6.35, Caution: Please use the coated abrasive (abrasive wax).
分類 帶軸磨頭 > 帶軸砂紙磨頭
研磨軸筒
ICHIGUCHI
4.67(9)
3.39 - 24.99 SGD
分類 帶軸磨頭 > 軸用型(砂紙圈) >
不銹鋼有軸杯刷
YANASE
8.79 SGD
ADD TO CART
Shaft Diameter (phi mm): 6, Wire Diameter (phi mm): 0.28, Trim Length (mm): 25, Material (Brush Part): Stainless wire, Outer Diameter (phi mm): 65, Metal Fitting Diameter (mm phi): 50, Purpose: Flat and concave-Board surface polishing.Wide range of polishing, cleaning, surface finish.
分類 帶軸磨頭 > 帶軸毛刷磨頭 > 杯式刷子
杯刷與黃銅軸
YANASE
2.67(3)
9.59 SGD
ADD TO CART
Shaft Diameter (phi mm): 6, Wire Diameter (phi mm): 0.28, Trim Length (mm): 25, Material (Brush Part): Brass wire, Outer Diameter (phi mm): 65, Metal Fitting Diameter (mm phi): 50, Purpose: Flat and concave-Board surface polishing.Wide range of polishing, cleaning, surface finish.
分類 帶軸磨頭 > 帶軸毛刷磨頭 > 杯式刷子
帶柄膠輪 CM型WA120 (藍)
Daiwa Kasei Industry
3.33(3)
27.99 - 39.99 SGD
Caution: Please use below the number of turns specified by the manufacturer. If the grinder you use is for high-speed rotating, then please at all costs lower than number of rotations and use it., Abrasive Grain: WA120 (blue), Purpose: Ideal for general steel like soft steel, half-mild steel etc. Good for hardened carbon steel, stainless steel etc are ideal especially for injury prevention.
分類 帶軸磨頭 > 帶軸砂輪頭
帶

ICHIGUCHI
3.75(4)
8.79 - 38.99 SGD
分類 帶軸磨頭 > 軸用型(砂紙圈) > 交流頻段
帶柄膠輪 CM型WA80 (紅)
Daiwa Kasei Industry
2.50(2)
27.99 - 39.99 SGD
Caution: Please use below the number of turns specified by the manufacturer. If the grinder you use is for high-speed rotating, then please at all costs lower than number of rotations and use it., Abrasive Grain: WA80 (Red), Purpose: Ideal for general steel like soft steel, half-mild steel etc. Good for hardened carbon steel, stainless steel etc are ideal especially for injury prevention.
分類 帶軸磨頭 > 帶軸砂輪頭
六角軸輪型鋼絲刷
Sumflex
13.99 - 24.99 SGD
Specification: Hexagonal axis(6.35 mm of opposite sides), Shaft Length (mm): 27
分類 帶軸磨頭 > 帶軸毛刷磨頭 > 輪刷,平刷
硬質合金銼刀杆(A系列)
MRA
5.00(5)
17.99 - 22.99 SGD
Material: All cemented carbide, Overall Length (mm): 38
分類 帶軸磨頭 > 旋轉杆
WA帶軸砂輪磨頭紅I
FSK
5.00(2)
5.49 - 8.59 SGD
Grain Size: 60, Abrasive Grain: WA (red), Coupling: P
分類 帶軸磨頭 > 帶軸砂輪頭
PA(粉紅)帶軸砂輪磨頭(軸徑6mm)
TRUSCO
4.00(2)
24.99 - 39.99 SGD
Grain Size: 60
分類 帶軸磨頭 > 帶軸砂輪頭
毛氈帶柄拋光輪
YANASE
11.99 SGD
Shaft Diameter (phi mm): 6, Width (mm): 25, Purpose: Mirror finish polishing of metals such as steel, stainless steel.Sisal wheel with axis, cotton wheel after polishing.Wiping metals, bringing out the shine and luster.
分類 帶軸磨頭 > 感覺魔法增益
帶軸砂輪(平型)
MonotaRO
1.79 - 2.59 SGD
Material: WA (red), Shape: Flat (cylindrical), Maximum Rotation Speed (min-1[r. p.m]): 50,000-65,000
分類 帶軸磨頭 > 帶軸砂輪頭
WA(紅)帶軸砂輪磨頭(軸徑6mm)
TRUSCO
5.00(1)
18.99 - 46.99 SGD
Specification: WA60P, Grain Size: 60, Usage Tool: Micro grinder, electric drill
分類 帶軸磨頭 > 帶軸砂輪頭
筆形鋼絲刷 不銹鋼線
TRUSCO
4.67(3)
10.99 - 15.99 SGD
Shaft Diameter (phi mm): 3, Abstract: Polishing of stainless steel, aluminum products. , Maximum Rotation Speed (min-1[r. p.m]): 15000, Shaft Length (mm): 36, Usage Tool: In-variable-speed type electric micro grinder, Wire Diameter (phi mm): Stainless steel 0.1 (304), Purpose: Polishing of aluminum products
分類 帶軸磨頭 > 帶軸毛刷磨頭 > 圓筒型,刷型,端型刷
六角軸 金剛石磨頭
RELIEF
1.00(2)
19.99 SGD
Allowable Number of Rotations (min-1r.p.m): 18000, Hexagon Axis Opposite Side Length (mm): 6.35, Purpose: Polishing, General metal, non-ferrous metals, stainless steel, carbide saw blade, precious metal, glass, stone, ceramic, milling and engraving text, patterned carving.
分類 帶軸磨頭 > 帶軸金剛石磨頭
毛刷式帶柄拋光輪
ThreeM 3M
4.00(1)
96.99 SGD
Specification: phi 3.18mmx1, phi3.0mmx1, Weight (g): 125, Maximum Rotation Speed (min-1[r. p.m]): 35000, Outside Diameter x Bore Diameter (phi mm): 25.4x3.2
分類 帶軸磨頭 > 帶軸砂紙磨頭
帶軸碗形鋼絲刷(六角軸型 鋼絲線)
TRUSCO
2.00(1)
16.99 - 22.99 SGD
Maximum Rotation Speed (min-1[r. p.m]): 3000, Wire Diameter (mm): Wire 0.3
分類 帶軸磨頭 > 帶軸毛刷磨頭 > 杯式刷子
毛氈帶柄拋光輪(圓筒型)
YANASE
4.00(1)
6.19 - 7.99 SGD
Purpose: Mirror-finish polishing of metals.Mirror finish polishing for after polishing on hemp and cotton buffing wheels.Wiping metals, bringing out the shine and luster., Caution: Please use the coated abrasive (abrasive wax).
分類 帶軸磨頭 > 感覺魔法增益
不銹鋼有軸輪刷
YANASE
4.67(3)
7.79 SGD
ADD TO CART
Application: For the polishing of stainless steel, aluminum products., Shaft Diameter (phi mm): 6, Thickness (mm): 13, Maximum Rotation Speed (min-1[r. p.m]): 4500, Wire Diameter (phi mm): 0.25, Material (Brush Part): Stainless wire, Outer Diameter (phi mm): 75, Metal Fitting Diameter (mm phi): 38, Purpose: Suitable for narrow grooves and polished, cleaned and surface finish.Takes off rust and dirt, and can be used on a flat surface
分類 帶軸磨頭 > 帶軸毛刷磨頭 > 輪刷,平刷
Flexhorn(BC型·粒度600)
YUKO CORPORATION
5.00(4)
76.99 - 199.90 SGD
Grain Size: 600, Abrasive Type: Silicon carbide
分類 帶軸磨頭 > Flex的珩磨機
帶軸金剛石磨頭
HONGIA
2.00(1)
17.99 SGD
Shaft Diameter (phi mm): 3, Overall Length (mm): 45, Maximum Rotation Speed (min-1[r. p.m]): 60000
分類 帶軸磨頭 > 帶軸金剛石磨頭
頁輪
MonotaRO
14.99 - 45.99 SGD
Width (mm): 25, Structure of Abrasives: Polishing cloth
分類 帶軸磨頭 > 翼片拋光輪
帶六角軸小型圓盤打磨機
Sumflex
10.99 SGD
Specification: Hexagonal axis(6.35 mm of opposite sides), Grain Size: 100, Thickness (mm): 1.4, Abrasive Material: A
分類 帶軸磨頭 > 帶軸砂輪頭
蘑菇型拋光輪
YANASE
11.99 - 69.99 SGD
Material: Cotton, Shaft Diameter (phi mm): 6, Color: White, Purpose: Buff for specular finish
分類 帶軸磨頭 > 感覺魔法增益
六角軸 碗型刷 鋼線
RELIEF
4.00(3)
9.59 - 14.99 SGD
Shaft Length (mm): 30, Wire Diameter (phi mm): 0.35, Trim Length (mm): 25, Hexagon Axis Opposite Side Length (mm): 6.35, Purpose: For, rust removal, paint removal, deburring, groundwork polishing.
分類 帶軸磨頭 > 帶軸毛刷磨頭 > 杯式刷子
帶軸研磨 Rorokku盤墊(橡膠硬度)M中等
ThreeM 3M
5.00(1)
38.99 SGD
ADD TO CART
TRUSCO Part Number: 126-5415, Type: Cross disk / Rollock /3M, Maximum Rotation Speed (min-1[r. p.m]): 25000, Rubber Hardness: M Medium
分類 帶軸磨頭 > 軸用型(砂紙圈) > 保持墊
帶軸鋼絲刷
ESCO
4.50(2)
23.99 - 38.99 SGD
Shaft Diameter (phi mm): 6, Diameter (phi mm): 30, Wire Diameter (phi mm): 0.3, Trim Length (mm): 25, Maximum Speed (min-1[r. p.m]): 2000
分類 帶軸磨頭 > 帶軸毛刷磨頭 > 圓筒型,刷型,端型刷
研磨軸筒(軸徑3mm)
TRUSCO
5.00(2)
3.29 - 7.99 SGD
Type: Drum, Maximum Rotation Speed (min-1[r. p.m]): 25000
分類 帶軸磨頭 > 帶軸砂紙磨頭
硬質合金(A系列)
Material: All cemented carbide, Overall Length (mm): 38
分類 帶軸磨頭 > 旋轉杆

1 2 3 4 5 6 7 8 9 10 ...113