訂單總金額超過 * S$200* 免運費

打磨機/磨光機

排序:
共 145 條結果, 第 1 - 30 條
顯示: 30 60 90
視圖: 網格視圖 列表視圖
立式拋光機
Compact Tool
5.00(1)
489.90 SGD
Revolution (min-1[r.p.m]): 3000, Dimensions (Width W x Height H x Length L) (mm): 205x153x208, Flow Rate (L/min): 450, Noise Level (dB(A)): 82, Pad Size (phi mm): 123
分類 打磨機/磨光機
無級變速拋光機
MEISTER KOBO
74.99 SGD
ADD TO CART
Accessories: 2 sheets each of Coarse # 60; middle# 120; and finishing # 240 sanding paper; cloth バフパット, wool バフパット, dust bag, Specification: Double insulation structure, Weight (kg): About 1.8, Capacity: (Dust bag) About 200 mm3, Cycle(Hz): 50/60, Voltage (V): 100, Power Consumption (W): 420, Revolution (min-1[r.p.m]): 4000 - 12000, Cord Length (m): About 2.0, Rated Current (A): 4.4, Rated Time (minutes): 30, Bit Dimensions (mm): About phi 123 (Polishing tool dimensions phi 125 magic type), Purpose: Wood and metal polishing, rust remover, car waxing and polishing
分類 打磨機/磨光機
雙重動作雷霆
ThreeM 3M
4.80(5)
489.90 SGD
ADD TO CART
Application: Automotive plastic parts foundation treatment. Vehicles, boats, construction equipment foundation treatment, etc. Baking finish repair., Accessories: Clean sanding disk-pads PN20353 (outside diameter: 125 mm), wrench, lubricating oil, filter bag PN20452 for dust collecting (only suction dust type is attached), Specification: Rotation Type : Double Action, TRUSCO Part Number: 336-1187, Material: Case: Resin Frame: Metal, Overall Length (mm): 155.4, Weight (kg): 0.83, Type: Suction dust type, Maximum Rotation Speed (min-1[r. p.m]): 12000 (at the time of no-load), Air Consumption (L/min): 481, Pad Dimension (mm): 125, Paper Dimension (mm): 125, Orbit Diamond(mm): 5, Purpose: Automotive plastic parts foundation treatment. Vehicles, boats, construction equipment foundation treatmen...
分類 打磨機/磨光機
吸塵式 Hoopu打磨機
Solar
3.00(1)
329.90 SGD
ADD TO CART
Accessories: One-touch coupler plug, a spanner, putt, a hose, dust collection bag, air tool oil, Overall Length (mm): 173 (When mounted on the coupler), Weight (kg): 0.9, Type: Dust collection bag, Revolution (min-1[r.p.m]): 10000, Air Consumption (m3/min): 0.34, Air Outlet: R1/4, Air Pressure: 5 - 6, Orbit Diameter (mm): 5, Pad Size (phi mm): 125 Magic Type
分類 打磨機/磨光機
雙轉向式氣動打磨機
PAULSTRA
329.90 SGD
ADD TO CART
Weight (kg): 0.95, No Load Rotation Speed (min-1[r.p.m]): 10000, Body Dimensions (Length x Width x Height) (mm): 140x123x100, Air Consumption (L/min): 330, Maximum Working Pressure (MPa): 0.59, Size (mm): Coin-type lithium battery CR2354x1, Purpose: Polishing of iron plate, painted surfaces, FRP, woodworking, etc.
分類 打磨機/磨光機
雙向震拋機
SHINANO
5.00(1)
439.90 SGD
Specification: Air system Non-dust type Glue formula, Revolution (min-1[r.p.m]): 10000, Air Consumption (L/min): 360, Paper Dimension (mm): 125, DIA Dimension (mm): 5, Hose Coupling: Rc1/4 inch, Purpose: For various polishing work such as woodworking, metal grinding.
分類 打磨機/磨光機
雙重動作打磨機
KUKEN
489.90 SGD
ADD TO CART
Application: Feather edging work. Putty polishing. Scratching work before coating. For whole polishing work., Accessories: Coupler 20PMx1, plate wrench x1 (24 26Hex), Magic Pat (no hole), Specification: hook and loop fastener type(no holes), TRUSCO Part Number: 295-4206, Overall Length (mm): 181 (with pads), Weight (kg): 1.05 (with pads), Overall Height (mm): 91 (with pads), No Load Rotation Speed (min-1[r.p.m]): [9500], Air Consumption (m3/min): 0.38, Hose (mm): 6.5, Orbit Diameter (mm): 5.0 (Orbit diamond), Hose Mouthpiece Mounting Screw: Rc1/4, Noise Level (dB(A)): 86, Compressor: 2.2(kW), Paper Diameter (mm): 125, 2014 TRUSCO Published Page: 2-1563, Purpose: Feather edging work. Putty polishing. Scratching work before coating. For whole polishing work.
分類 打磨機/磨光機
非吸塵雙動作砂磨機
Compact Tool
439.90 SGD
Revolution (min-1[r.p.m]): 9500, Dimensions (Width W x Height H x Length L) (mm): 123x90x158, Flow Rate (L/min): 380, Noise Level (dB(A)): 78, Orbit Diamond(mm): 5, Pad Size (phi mm): 123
分類 打磨機/磨光機
非吸塵式雙動作砂磨機 魔術貼式
Compact Tool
489.90 SGD
ADD TO CART
TRUSCO Part Number: 401-0256, Overall Length (mm): 145, Weight (g): 550, No Load Rotation Speed (min-1[r.p.m]): 8500, Working Pressure (MPa): 0.4 to 0.6, Paper Dimension (mm): 125, Air Consumption (m3/min): 0.3, Noise Level (dB(A)): 80, Orbit Diamond(mm): 5, Pad Size (mm): 123, Exhaust Direction: Backward, 2014 TRUSCO Published Page: 2-1568, Purpose: Final polishing using sanding paper.(Putty polishing, woodwork polishing, FRP polishing)
分類 打磨機/磨光機
雙動砂磨機
Compact Tool
599.90 SGD
Weight (kg): 1.0, Air Inlet: G 1/4", Main Part Dimensions (Length x Height x Width) (mm): 250x90x123phi, Orbit Diamond(mm): 5, Pad Size (mm): 123phi, Caution: This product is manufactured in Japanese standards. Please check the specification before you order.
分類 打磨機/磨光機
雙重行動雷霆
KUKEN
649.90 SGD
ADD TO CART
Specification: Use paper size/phi125mm. Orbit diamond/5mm, TRUSCO Part Number: 295-4222, Overall Length (mm): 182 (with pads), Weight (kg): 1.05 (with pads), Type: Dust suction-type (with Magic), Overall Height (mm): 95 (Padded), Air Consumption (m3/min): 0.38, Rolling Speed of No-load (min-1[r.p.m]): 9500, Hose Mouthpiece Mounting Screw: Rc1/4, Use Air Hose's Inner Diameter (mm): 6.5, Compressor: 2.2kw, 2014 TRUSCO Published Page: 2-1563, Purpose: Feather edging, putty polishing work. Base treatment before painting. For general industry.
分類 打磨機/磨光機
無塵雙重雷擊
Compact Tool
489.90 - 539.90 SGD
Weight (kg): 1.6, Revolution (min-1[r.p.m]): 10000, Working Pressure (MPa): 0.4-0.6, Dimensions (Width W x Height H x Length L) (mm): 123x119x241, Flow Rate (L/min): 400, Orbit Diamond(mm): 10, Pad Size (phi mm): 123
分類 打磨機/磨光機
50phi Mini Double Action Thunder
SP AIR
4.00(2)
439.90 SGD
ADD TO CART
TRUSCO Part Number: 332-1304, Weight (kg): 0.6, No Load Rotation Speed (min-1[r.p.m]): 13000, Body: SP-7201DA, Air Consumption (m3/min): 0.3, Bit Dimensions (mm): 50, Hose Mounting Nozzle: NPT1/4, Orbit Diamond(mm): 3, Purpose: Rust removal work. (SP-7201G-K) To repair the car body. (SP-7201 DA-K)
分類 打磨機/磨光機
空氣雷霆
ESCO
199.90 SGD
ADD TO CART
ESCO Part Number: EA162PA, Dimension (mm): 77x20x86 (when the base used), Overall Length (mm): 150, Weight (g): 500, Working Pressure (MPa): 0.62, No Load Rotation Speed (min-1[r.p.m]): 13000, Air Consumption (L/min): 143, Indispensability Compressor (kw): 1.5-2.2, Suction Port Size: 1/4inchPT
分類 打磨機/磨光機
自由打磨器
NITTO KOHKI
649.90 SGD
ADD TO CART
Accessories: Abrasive paper # 180, # 240, #280, 320 x 5 copies of each Rubber supports Assyx4 , air hose Assy (1 / 8) x 1 (with coupler 20PM) Coupler 200 - 20SHx1, Specification: Pneumatic compact and light-weight grinding machine High speed turbine type, TRUSCO Part Number: 116-7014, Weight (kg): 0.5, Type: High-speed turbine motor type, No Load Rotation Speed (min-1[r.p.m]): 20000, Pad Dimension (mm): 100 x 110, Paper Dimension (mm): 114 x 140, Air Consumption (m3/min): 0.2, Working Pressure (MPa [kgf/cm2]): 0.59[6], Orbit Diameter (mm): 1.5
分類 打磨機/磨光機
免費雷霆
NITTO KOHKI
469.90 SGD
ADD TO CART
Accessories: Polishing paper # 180, # 240, # 280, Assyx4 pieces # 320x each five rubber support, 200-20SHx1 pieces (with coupler 20PM) coupler (1/8) x1 This air hose Assy, TRUSCO Part Number: 116-7006, Type: Ultra-compact and lightweight pneumatic polishing machine, Weight (kg): 0.5, Type: Small ball motor type, No Load Rotation Speed (min-1[r.p.m]): 15000, Pad Dimension (mm): 70x82, Paper Dimension (mm): 70x114, Air Consumption (m3/min): 0.14, Working Pressure (MPa [kgf/cm2]): 0.6[6], Orbit Diameter (mm): 1.2, 2014 TRUSCO Published Page: 2-1561
分類 打磨機/磨光機
空中雷霆
ESCO
199.90 SGD
ADD TO CART
ESCO Part Number: EA162DC, Overall Length (mm): 150, Weight (kg): 1.1, Working Pressure (MPa): 0.64, No Load Rotation Speed (min-1[r.p.m]): 15000, Air Consumption (L/min): 115, Indispensability Compressor (kw): 2.2, Suction Port Size: 1/4inchPT, Caution: This product is manufactured in Japanese standards. Please check the specification before you order.
分類 打磨機/磨光機
雙重動作雷霆
ThreeM 3M
489.90 SGD
ADD TO CART
Accessories: Clean sanding disc pad PN20353 wrench lubricant coupler (20PM), Specification: Double action rotation type, Weight (kg): 0.8, Type: Non-dust suction, Maximum Rotation Speed (min-1[r. p.m]): 12000, Orbit Diamond(mm): 5, Pad Size (mm): 125
分類 打磨機/磨光機
Line Thunder
NITTO KOHKI
589.90 SGD
ADD TO CART
TRUSCO Part Number: 495-7741, Body Weight (kg): 0.75, Paper Dimension (mm): 57x140, Air Consumption (m3/min): 0.11, Working Pressure (MPa [kgf/cm2]): 0.59[6], Pad Size (mm): 55x103, Purpose: Pneumatic reciprocating flat grinding machine
分類 打磨機/磨光機
SI Angle Thunder
SHINANO
489.90 SGD
ADD TO CART
TRUSCO Part Number: 292-9911, Overall Length (mm): 166, Weight (kg): 0.62, No Load Rotation Speed (min-1[r.p.m]): 13000, Working Pressure (MPa): 0.6, Paper Dimension (mm): 50, Air Consumption (m3/min): 0.20, Hose Mounting Nozzle: Rc1/4, Purpose: For polishing work.
分類 打磨機/磨光機
緩慢的Balikillar Air Thunder D
ZTEC
769.90 SGD
ADD TO CART
Weight (kg): 0.78, Air Consumption (L/min): 380, Pad Size (phi mm): 75,50, Caution: This product is manufactured in Japanese standards. Please check the specification before you order.
分類 打磨機/磨光機
雙重動作雷霆
Compact Tool
2.00(1)
779.90 SGD
Dimension (mm): W123xH98xL153, Weight (kg): 1.0, Revolution (min-1[r.p.m]): 10000, Noise Level (dB): 92, Flow Rate (L/min): 350, Orbit Diamond(mm): 10, Pad Size (mm): 123, Caution: This product is manufactured in Japanese standards. Please check the specification before you order.
分類 打磨機/磨光機
Double action Thunder
SP AIR
3.00(1)
299.90 - 469.90 SGD
Working Pressure (MPa): 0.6, Air Consumption (m3/min): 0.3, Hose Mounting Nozzle: NPT1/4, Purpose: For polishing work.
分類 打磨機/磨光機
角迷你拋光機Φ72mm
U-TOOLS (SAITAMA SEIKI)
459.90 SGD
ADD TO CART
Overall Length (mm): 185, Weight (kg): 0.7, Height (mm): 75, Connector: 1/4PT, No Load Rotation Speed (min-1[r.p.m]): 2500, Air Consumption (L/min): 350, Noise Level (dB(A)): 84, Orbit Diamond(mm): 3, Pad Size (mm): 72, Caution: This product is manufactured in Japanese standards. Please check the specification before you order.
分類 打磨機/磨光機
高速迷你拋光Φ42mm
U-TOOLS (SAITAMA SEIKI)
389.90 SGD
ADD TO CART
Overall Length (mm): 135, Weight (kg): 0.49, Height (mm): 65, Connector: 1/4PT, No Load Rotation Speed (min-1[r.p.m]): 22000, Air Consumption (L/min): 400, Noise Level (dB(A)): 80, Pad Size (mm): 45, Caution: This product is manufactured in Japanese standards. Please check the specification before you order.
分類 打磨機/磨光機
Mini Angle Thunder
Axel
249.90 SGD
ADD TO CART
Overall Length (mm): 110, Weight (g): 400, Revolution (min-1[r.p.m]): 19000, Outer Diameter (phi mm): 35, Air Pressure (MPa): 0.4-0.6, Air Consumption (m3/min): 0.3
分類 打磨機/磨光機
迷你迅雷角
Axel
249.90 SGD
ADD TO CART
Overall Length (mm): 110, Weight (g): 400, Revolution (min-1[r.p.m]): 19000, Outer Diameter (phi mm): 35, Air Pressure (MPa): 0.4-0.6, Air Consumption (m3/min): 0.3, Caution: This product is manufactured in Japanese standards. Please check the specification before you order.
分類 打磨機/磨光機
夾頭角度雷霆(90度)
Axel
179.90 SGD
ADD TO CART
Overall Length (mm): 130, 130, Weight (g): 450, 450, Revolution (min-1[r.p.m]): 19000, 19000, Outer Diameter (phi mm): 33, 33, Air Pressure (MPa): 0.4-0.65, 0.4-0.65, Air Consumption (m3/min): 0.3, 0.3, Collet Size (mm): 6, 6
分類 打磨機/磨光機
58Φ角雷
Axel
249.90 SGD
ADD TO CART
Overall Length (mm): 124, Weight (g): 460, Revolution (min-1[r.p.m]): 19000, Outer Diameter (phi mm): 32, Air Pressure (MPa): 0.4-0.6, Air Consumption (m3/min): 0.3, Caution: This product is manufactured in Japanese standards. Please check the specification before you order.
分類 打磨機/磨光機
微角雷霆
Axel
389.90 SGD
ADD TO CART
Overall Length (mm): 124, 124, Weight (g): 140, 140, Revolution (min-1[r.p.m]): 25000, 25000, Outer Diameter (phi mm): 18, 18, Air Pressure (MPa): 0.4-0.6, 0.4-0.6, Air Consumption (m3/min): 0.2, 0.2
分類 打磨機/磨光機

1 2 3 4 5