訂單總金額超過 * S$200* 免運費

焊接用品

排序:
共 2,880 條結果, 第 1 - 30 條
顯示: 30 60 90
視圖: 網格視圖 列表視圖
焊接衡量WGU-7M
SK
76.99 SGD
ADD TO CART
Type: Welding gauge, Material: Stainless steel (SUS420J2), Thickness (mm): 1.5, Dimension (mm): 95x68, Pricision: Length accuracy +/-1 Angular accuracy +/-2degree, Undercut Measuring Range (mm): 25
分類 焊接用品 > 焊接儀器 > 焊接儀表
低碳鋼用氬弧焊焊條
MonotaRO
10.99 - 24.99 SGD
Standard: JISZ3211 D4303 equivalent product, Purpose: Welding of car, bridge, lightweight steel frame, and construction., Welding of car, bridge, lightweight steel frame, and construction., Caution: During welding , If you inhale the generated gas or fumes, it may cause damage to your health . So please use exhaust , ventilation or wear protective equipments ., During welding , If you inhale the generated gas or fumes, it may cause damage to your health . So please use exhaust , ventilation or wear protective equipments .
分類 焊接用品 > 焊條 > 用於低碳鋼和高強度鋼
地線夾
Sanritsu Electric Industry
4.86(7)
35.99 - 45.99 SGD
Length (mm): 235, Weight (g): 435, Welding Current (A): 300
分類 焊接用品 > 焊接電纜和連接接頭,其他 > 夾具·接地夾 > 持有人
J形電纜接頭
Sanritsu Electric Industry
3.00(3)
27.99 - 159.90 SGD
分類 焊接用品 > 焊接電纜和連接接頭,其他 > 焊接接頭 > 電纜接頭
角凹槽計量器WGA-65
SK
149.90 SGD
ADD TO CART
Specification: Open tip (bevel) angle: 25 - 65 degree (minimum reading 0.5 degree) Tilt angle of the stud after welding joint: 70 - 110 degree, TRUSCO Part Number: 412-1678, Material: Stainless steel (SUS410), Weight (g): 73.5, Measurement Pricision: +/- 0.5 degree (angle)
分類 焊接用品 > 焊接儀器 > 焊接儀表
普通用銀焊料
Shinfuji Burner
35.99 SGD
ADD TO CART
Ingredients: 35% Silver, 0% cadmium, TRUSCO Part Number: 376-9160, Allowable Temperature (degreeC): 745, Dimension (phi x mm): 1.0x300, Tensile Strength (kgf/mm2): 45
分類 焊接用品 > 錫焊·銅焊·氣焊焊條 > 釬焊材料
焊縫量規
FUJI TOOL
4.00(1)
98.99 SGD
ADD TO CART
Description 2: To any measurement of welding work, Type: Welding gauge, Material: Stainless material, Measuring Range (mm): (Measured flat-fillet weld overlay)20 (Swollen throat thickness measurement)20 (Measurement of plate-round bar)20 (Hole diameter measurement route interval and crevice) 0.5 - 10(0.5tovey), Pricision (mm): 0.2 Within, Measurement Range (degree): (Bevel groove angle measurement) 0-85 (five tovey) (general angle measurement) 0-50 (five tovey)
分類 焊接用品 > 焊接儀器 > 焊接儀表
掌上型丙烷割槍用割槍嘴
NISSAN TANAKA
19.99 SGD
Compatible: Tanaka small LPG cutting torch Tanaka medium LPG cutting torch, Gas: Propane
分類 焊接用品 > 氣體熔斷・焊接 > 吹管和焊接技巧 > 彈坑
焊接規
TRUSCO
5.00(1)
44.99 - 269.90 SGD
分類 焊接用品 > 焊接儀器 > 焊接儀表
銀焊料
TRUSCO
4.20(5)
67.99 - 249.90 SGD
Material: 40% Silver content, Length (mm): 500, Melting Point (degree c): 780, Tensile Strength (N/mm2): 539, Purpose: Brazing of dissimilar metals of iron, brass, stainless steel, silver and copper, Caution: Always use silver soldering flux (TRZ-200).
分類 焊接用品 > 錫焊·銅焊·氣焊焊條 > 銀釬桿
Winning送風槍
Matsuden
329.90 SGD
ADD TO CART
Description: diaphragm noise not to be worried about, is the blower type., Compatible: 51, 47, 15N, M sharable, Dimension (mm): 32phi x 200 x 140, Weight (g): 650
分類 焊接用品 > 焊接機・氣焊機 > PVC加工機
鋁用氬焊條
NIPPON WELDING ROD
4.17(6)
149.90 - 179.90 SGD
Length (mm): 1000, JIS Standard: Z 3232 A 5356-BY, AWS Standards: A5.10 R5356, Purpose: For Al-Mg alloys
分類 焊接用品 > TIG焊條 > 鋁用
帶加熱器壓力調節器
CHIYODA SEIKI
439.90 SGD
ADD TO CART
Material: BODY: C3771B, DIAPHRAGM: CR, SHEET :C3604B, Connection Diameter: Inlet side of :W22 mountain (right) 14 bags per Nut gasket, EXIT SIDE :M12x1... phi 6 6 HOSE WITH FITTINGS * NEEDLE VALVE, Weight (kg): 2.06, Peak Flow Rate (L/min): 25, Cord Length (m): 2.0, Power Source (AC V): 100, Gas: Carbon dioxide as the primary, Valve-Inlet Pressure Meter (MPa): 0 - 25, Valve-Inlet Pressure (MPa): tless than 14.7 , Secondary Side Pressure Guage (MPa): 0 - 0.6, Adjustment Pressure (MPa): 0.1 - 0.3, Flowmeter (L/min): 2 - 25, Heater's storage capacity (W): 190, Purpose: Arc welding, beverages, food industry, casting industry, promotion of plant cultivation, industrial, etc., Arc welding, beverages, food industry, casting industry, promotion of plant cultivation, industrial, etc., Caution: Can...
分類 焊接用品 > 焊接氣體軟管和調節器耦合器 > 氣體調整器
小型氣焊槍
SAKAGUCHI
4.50(4)
149.90 SGD
ADD TO CART
Accessories: Five (No.50, 70, 100, 140, 200 1 each), Overall Length (mm): 370, Weight (g): 510, Gas: Acetylene type, Welding Capability (mm): 0.5 - 3, Purpose: For welding of 5 mm of sheet metal, For welding of 5 mm of sheet metal
分類 焊接用品 > 氣體熔斷・焊接 > 吹管和焊接技巧 > 焊接設備
CO2焊槍用節流器
Panasonic Smart Factory Solutions
4.33(3)
45.99 - 64.99 SGD
Number of Holes: 8(phi2.0mm)
分類 焊接用品 > 焊槍 > CO2焊接焊槍用交換零件 >
防水標記粉筆
TRUSCO
13.99 SGD
Dimension (mm): phi15x100, Weight (g): 19
分類 焊接用品 > 滑石鉛筆和標記 > 粉筆
遮光眼鏡 No.337W
YAMAMOTO
24.99 SGD
Size: W157xH64xD150(mm), Weight (g): 43, Frame: Plastic, Frame Color: Green, Material (frame): Plastic, Material (lens): Polycarbonate
分類 焊接用品 > 焊接面具,著色眼鏡 > 擋光眼鏡
氬氣體壓力調整器 高・可選
CHIYODA SEIKI
399.90 SGD
ADD TO CART
Specification: Brass, Weight (kg): 1.4, Peak Flow Rate (L/min): 100, Connection: Entrance: W22-14 right (standard) exit: M12x1.0 (phi6 hose fitting), Compatible Gas: Ar (argon gas), Valve-Inlet Pressure Meter (MPa): 0 - 25, Valve-Inlet Pressure (MPa): 14.7 below, Secondary Side Pressure Guage (MPa): 0 - 1, Adjustment Pressure (MPa): 0.1 - 0.6, Flowmeter (L/min): 41695
分類 焊接用品 > 焊接氣體軟管和調節器耦合器 > 氣體調整器
電極
DAIHEN
4.86(7)
85.99 - 119.90 SGD
分類 焊接用品 > 焊槍 > 空氣等離子焊槍用交換零件 > 電極
焊錫助焊劑
Shinfuji Burner
11.99 SGD
ADD TO CART
Compatible: Silver solder (RZ-100, RZ-107, RZ-108, RZ-150) Phospor bronze solder (RZ-102), TRUSCO Part Number: 376-9275, Type: Liquefied
分類 焊接用品 > 錫焊·銅焊·氣焊焊條 > 通量
氧氣用調整器 SS小型
YAMATO SANGYO
5.00(1)
199.90 SGD
Weight (kg): 1.1
分類 焊接用品 > 焊接氣體軟管和調節器耦合器 > 氣體調整器
低碳鋼焊條〜550MPa級鋼
Kobe Steel
5.00(1)
45.99 - 199.90 SGD
分類 焊接用品 > 焊條 > 用於低碳鋼和高強度鋼
通用小型壓力調整器
YAMATO SANGYO
4.75(4)
199.90 SGD
ADD TO CART
Connection Diameter: Inner outlet: W22-14crest/ Outer outlet: 8phi hose opening, Weight (kg): 1.2, Model/Type: Kanto type (hexagon cap nut type), Gas: Oxygen, Primary-side Working Range (MPa): - 15, Secondary-side Working Range (MPa): 0.2 - 0.99, High Gauge Pressure (MPa): 25, Low Gauge Pressure (MPa): 2.5, Standard Flow rate (m3/h): 25(P1=2.1MPa, P2=0.8MPa)
分類 焊接用品 > 焊接氣體軟管和調節器耦合器 > 氣體調整器
LPG軟管
TOGAWA RUBBER
3.25(4)
39.99 - 76.99 SGD
Color: Orange, Inner Diameter (phi mm): 9.5, Working Pressure (MPa): 2.0, Outer Diameter (phi mm): 16.5, Display: LMN, Reinforcing Layer: 2S, Approximate Mass (g/m): 190
分類 焊接用品 > 焊接氣體軟管和調節器耦合器 > 焊接氣體軟管
低碳鋼 到550MPa級鋼用焊條
Kobe Steel
24.99 - 229.90 SGD
分類 焊接用品 > 焊條 > 用於低碳鋼和高強度鋼
半自動電焊機Arcury120
STAR ELECTRIC MANUFACTURING (SUZUKID)
3.50(2)
1,299.00 SGD
ADD TO CART
Specification: Wire speed control dial, main switch/Utilization over display lamp current 4 stage change-over switch, Set Contents: Earth clip (1.2m body with code) torch (code body with 1.8m) power cord (1.7m body with) 2P/100V adapter wire brush and chipping hammer-shielding surfaces (filter plate) hose band x2, Weight (kg): 20, Type: [100V] only semiprofessional, professional non-gas MIG / MAG combined, Cycle(Hz): 50/60 combined, Power Source (single phase/V): 100, Power Consumption (kW): 2.5, Rating Usage (%): 10, Welding Process: Non-gas welding / mild steel, stainless MAG welding / mild steel, stainless MIG welding / aluminum CO 2 welding / mild steel, Compatible Plate Thickness: Non-gas mild steel: 0.8 - 6.0mm (0.8 at 100V 15A use - 3.0mm) (6mm maximum at 100V 30A use)...
分類 焊接用品 > 焊接機・氣焊機 > 半自動焊接機
LP調整器
CHIYODA SEIKI
229.90 SGD
ADD TO CART
Caution: Do not use below 5 degree C air temperature. Cannot be used in the removed fluid from siphon tank etc., Material: main unit: C3771B Diaphragm: CR Seat: C3604B, Shape: Entrance: For W22.5 mountain 14 (the left) LP exit: M16-P1.5 (the left) 3/8 (phi9) hose mouth, Weight (kg): 0.75, Gas: Propane, Standard Flow rate (m3/h): 4 (normal condition), Secondary Side Pressure Guage (MPa): 0 To 0.25 (No primary side pressure gauge), Adjustment Pressure (MPa): 0.02 - 0.15, Inlet Pressure (MPa): less than 2.0
分類 焊接用品 > 焊接氣體軟管和調節器耦合器 > 氣體調整器
Speed Glass 自動變光焊接面罩 9100系列
ThreeM 3M
589.90 - 859.90 SGD
Type: Liquid crystal filter, Operating Temperature Range (deg C): -5 - +55, Degree of Shading: # 5, #8, and #9-13 (variable), Auto Power-off: 60 minutes, Return Speed (sec): 0.04-0.13 (variable / 23 deg C o'clock), Storage Temperature Range (degree c): -30 - +70, Protection: UV/IR/#13 (permanence), Light Shieling Speed (sec): 1/10000 (at 23 deg C ), Light Shielding Degree when Radioscopy: #3, Shading Degree when Power Off: #5, Purpose: Temporary welding. Polish welding.
分類 焊接用品 > 焊接面具,著色眼鏡 > 焊接表面(自動變暗表面) > 主要單位
通用緊湊型壓力調節器
YAMATO SANGYO
5.00(2)
219.90 SGD
ADD TO CART
Specification: With valve, TRUSCO Part Number: 126-7647, Weight (kg): 1.3, Material (Body): C3771B, Connection: Entrance: W22-14 (right) hexagon cap nut (P) Exit: phi8 hose opening (M16x1.5 (right) hexagon cap nut), Gas: Nitrogen, Primary-side Working Range (MPa): 2 - 14.7, Secondary-side Working Range (MPa): 0.2 - 0.99, Standard Flow rate (m3/h): 45, Valve-Inlet Pressure Meter (MPa): 25, Secondary Side Pressure Guage (MPa): 1.6, Maximum Flow Rate (m3/h): 55, Materials (Valve): PCTFE, Material (diaphragm): CR
分類 焊接用品 > 焊接氣體軟管和調節器耦合器 > 氣體調整器
耐火隔熱墊
TRUSCO
99.99 - 199.90 SGD
Finishing Material: Outer member: Gold sputtering sheet alpha (silica fiber) in material: ceramic blanket, Instant Heat Resistance: 1650deg C, Continuous Operation: 1000deg C
分類 焊接用品 > 焊接固化設備(板材,護欄) > 焊接板材 > 碳膜

1 2 3 4 5 6 7 8 9 10 ...96