訂單總金額超過 * S$200* 免運費
通知
由於節日放假,在此期間2019年4月27日~2019年5月6日JST
我們的回覆將會被推迟。謝謝您的理解。

標準儀/量規

排序:
共 2,205 條結果, 第 1 - 60 條
顯示: 30 60 90
視圖: 網格視圖 列表視圖
錐形塞規附帶直尺
SK
4.50(2)
$20.99
ADD TO CART
Type: Taper gauge, Material: Hardened stainless steel, Measuring Range (mm): (Taper gauge) 1-15, (linear scale) 0-130 , Pricision (mm): +/-0.05, Minimum Scale (mm): 0.1, Finishing: Hard chrome plating, Overall Length x Thickness (Scale) (mm): 155x0.5, Overall Length x Thickness (mm) (Te - PA - GE - di): 148.5x1.2, Purpose: Measurements of groove, gap, hole diameter and length., Measurements of groove, gap, hole diameter and length., Measurements of groove, gap, hole diameter and length., Measurements of groove, gap, hole diameter and length.
分類 標準儀/量規 > 錐度計
塞尺
Otokomae MonotaRO
6.99 - $48.99
Leaf Width (mm): 12.7
分類 標準儀/量規 > 塞尺 > 疾病計(集)
測隙規 縫隙用帶
TRUSCO
4.67(3)
11.99 - $139.99
Width (mm): 12.7, Length (m): 1
分類 標準儀/量規 > 塞尺 > 填料表
帶刻度帶臺直角尺
MonotaRO
10.99 - $16.99
Material: Rod / stainless steel Stand/carbon steel, Surface Processing: Polished finish scale/ Etching, Minimum Indication (mm): 1
分類 標準儀/量規 > 直角尺·水平儀 > 直角尺 > 廣場基地
錐度計直
Shinwa Rules
4.50(2)
$16.99
ADD TO CART
TRUSCO Part Number: 332-5865, Material: Stainless steel, Length (mm): 160, Thickness (mm): 1.2 (Taper gauge), 0.5 (linear scale), Weight (g): 20, Measuring Range (mm): (Taper gauge) 1-15, (linear scale) 0-150 , Hardness: Hv360 - 495, Pricision (mm): +/- 0.05 (Taper gauge) +/- 0.15 (linear scale), Finishing: Hard chrome plating
分類 標準儀/量規 > 錐度計
錐形塞規
SK
5.00(7)
34.99 - $41.99
Type: Taper gauge, Material: SC material, Width (mm): 11, Overall Length (mm): 160, Pricision (mm): +/-0.04, Minimum Scale (mm): 0.05, Finishing: Hard chrome plating
分類 標準儀/量規 > 錐度計
普通型直邊鋼
NIIGATA RIKEN SOKUHAN
5.00(1)
37.99 - $92.99
Finishing Material: Mild steel / polished finish
分類 標準儀/量規 > 直角尺·水平儀 > 直形水準測量尺 > 平麵類型
JIS塞尺(12.7寬)
NAGAI GAUGES
5.00(2)
65.99 - $479.99
JIS Standard: B7524, Leaf Width (mm): 12.7
分類 標準儀/量規 > 塞尺 > 疾病計(集)
塞尺12.7寬
TRUSCO
4.83(6)
12.99 - $67.99
分類 標準儀/量規 > 塞尺 > 疾病計(集)
半徑規L300型套裝
FUJI TOOL
169.99 - $2,449.99
Purpose: R section, R section
分類 標準儀/量規 > 半徑規
JIS塞尺
Futaba Gauge Works
27.99 - $189.99
Leaf Width (mm): 12.7
分類 標準儀/量規 > 塞尺 > 疾病計(集)
錐度計
SK
4.14(7)
13.99 - $20.99
Type: Taper gauge, Hardness: HV480, Scale Interval (mm): 0.1, Instrumental Error (mm): +/-0.05, Plate Thickness (mm): 1.2
分類 標準儀/量規 > 錐度計
C面測定規
FUJI TOOL
$93.99
Pricision (mm): +/-0.03
分類 標準儀/量規 > 倒角規
普通型角碼(PENGLASS)
Ohnishi Mfg
3.00(4)
42.99 - $1,109.99
Material: FC250, Purpose: Since the finishing is right angle, it is available to a simple horizontal boring and milling work and a lathe work., Since the finishing is right angle, it is available to a simple horizontal boring and milling work and a lathe work.
分類 標準儀/量規 > 平臺 > 角板
螺紋塞規
Sokuhansha
4.40(5)
129.99 - $169.99
Purpose: Female screw inspection, Female screw inspection
分類 標準儀/量規 > 螺紋量規 > 限量表
填充帶
Otokomae MonotaRO
7.99 - $18.99
Length (m): 1, Tape Width (mm): 12.7, Purpose: Height adjustment of machines, nterspace measurement, etc., Height adjustment of machines, nterspace measurement, etc., Height adjustment of machines, nterspace measurement, etc., Height adjustment of machines, nterspace measurement, etc.
分類 標準儀/量規 > 塞尺 > 填料表
半徑規178型
FUJI TOOL
4.67(6)
63.99 - $269.99
分類 標準儀/量規 > 半徑規
圓柱形錐度量規 No.710A
SK
5.00(1)
$41.99
ADD TO CART
Type: Taper gauge, Material: SK MATERIAL (CARBON STEEL), Overall Length (mm): About 93, Measuring Range (mm): 1 - 6 , Pricision: +/-0.05mm, Finishing: Hard chrome plating, Minimum Measurable Value: 0.1mm
分類 標準儀/量規 > 錐度計
活塞塊塞規(測厚帶)
NAGAI GAUGES
5.00(1)
19.99 - $55.99
Length (m): 1, Tape Width (mm): 12.7
分類 標準儀/量規 > 塞尺 > 填料表
螺紋塞規(JIS2級)
OSG
5.00(1)
179.99 - $449.99
分類 標準儀/量規 > 螺紋量規 > 限量表
固定型水準角尺
Shinwa Rules
20.99 - $36.99
Material: Scale plate: stainless steel SUS420J2 STAND: STAINLESS STEEL SUS304FB, Dimension (mm): 170x100x1.5, Pole Thickness (mm): 1.5, Pole Length (mm): 170, Angular Pricision (mm): 45degree: 0.2/100 90degree: 0.1/100, Pole Width (mm): 100, Stand Length (mm): 163, Stand Thickness (mm): 5, Purpose: Adjust framework 45 degree and inspect the work timber perpendicularly., Adjust framework 45 degree and inspect the work timber perpendicularly., Adjust framework 45 degree and inspect the work timber perpendicularly., Adjust framework 45 degree and inspect the work timber perpendicularly.
分類 標準儀/量規 > 直角尺·水平儀 > 直角尺 > 其他正方形
間距計
Shinwa Rules
$15.99
Material: Carbon tool steels, Purpose: Gauge to measure standard screw pitch., Gauge to measure standard screw pitch., Caution: To avoid rust, remove dirt, apply oil and keep cleanly after use., To avoid rust, remove dirt, apply oil and keep cleanly after use.
分類 標準儀/量規 > 螺距規
疾病計
SK
3.75(4)
9.99 - $45.99
Material: Carbon tool steels, Leaf Width (mm): 12.7
分類 標準儀/量規 > 塞尺 > 疾病計(集)
塊規
Mitutoyo
4.75(4)
25.99 - $709.99
分類 標準儀/量規 > 塊規(規塊) > Individual
C平面測量儀
TRUSCO
98.99 - $119.99
Finishing Material: Stainless steel (0.6mm thickness) (SUS430)
分類 標準儀/量規 > 倒角規
300mm 組合式角尺
ESCO
1.00(1)
$28.99
ADD TO CART
Material: Body: zinc die-cast scale: Steel, Scale (mm): 300, Minimum Scale Value: 1mm/1/16 "
分類 標準儀/量規 > 直角尺·水平儀 > 直角尺 > 組合廣場
鑽頭角度規
SK
2.50(2)
$38.99
ADD TO CART
Type: Drill edge gauge, Material: Tool steel (SK material), Thickness (mm): 10.3, Dimension (mm): 110x22, Point Angle (Degree): 118degree
分類 標準儀/量規 > 鑽頭尖端檢測
鋼制四棱平尺(普通型)A級加工
Ohnishi Mfg
5.00(2)
47.99 - $169.99
Material: Carbon tool steels
分類 標準儀/量規 > 直角尺·水平儀 > 直形水準測量尺 > 平麵類型
錐形塞規附帶金屬保護盒
Shinwa Rules
3.40(5)
$13.99
ADD TO CART
Specification: Pocket clip, strap, Material: Stainless, Length (mm): 155, Dimension (mm): 155x20x6 (at the time of storage), Weight (g): 25, Measuring Range (mm): 1 - 15, Hardness: Hv360 - 495, Pricision (mm): +/-0.05 (for the measuring range), Purpose: Inner diameter measurement, pore diameter measurement, interspace measurement, Inner diameter measurement, pore diameter measurement, interspace measurement, Inner diameter measurement, pore diameter measurement, interspace measurement, Inner diameter measurement, pore diameter measurement, interspace measurement
分類 標準儀/量規 > 錐度計
斜面刀口尺
NIIGATA RIKEN SOKUHAN
5.00(1)
39.99 - $109.99
Material: Steel
分類 標準儀/量規 > 直角尺·水平儀 > 直形水準測量尺 > 斜角型
砧臺(鑄鐵制)
Ohnishi Mfg
4.29(7)
70.99 - $159.99
Material: FC250, Purpose: For hammaring out nail and plane blade. It's possible to hammar out with corner round., For hammaring out nail and plane blade. It's possible to hammar out with corner round., For hammaring out nail and plane blade. It's possible to hammar out with corner round., For hammaring out nail and plane blade. It's possible to hammar out with corner round., Caution: As molded product, there is variation in dimension and weight., As molded product, there is variation in dimension and weight., As molded product, there is variation in dimension and weight., As molded product, there is variation in dimension and weight.
分類 標準儀/量規 > 平臺 >
針規 套裝
No Brand
259.99 - $739.99
Purpose: Used for measuring hole diameter, hole core spacing, location, slant (paralell), groove width, depth, are, and eccentric, Used for measuring hole diameter, hole core spacing, location, slant (paralell), groove width, depth, are, and eccentric
分類 標準儀/量規 > 針規 > Set items
塞尺
ESCO
5.00(1)
26.99 - $149.99
分類 標準儀/量規 > 塞尺 > 疾病計(集)
螺紋環規
Sokuhansha
269.99 - $329.99
Purpose: Male screw inspection, Male screw inspection
分類 標準儀/量規 > 環規
管用錐度計 孔用
TRUSCO
45.99 - $139.99
分類 標準儀/量規 > 錐度計
仿形規
Shinwa Rules
17.99 - $66.99
分類 標準儀/量規 > 輪廓儀
螺栓·螺母量規
Shinwa Rules
$7.99
ADD TO CART
Accessories: Inch meter conversion table with, Material: Body: ABS resin, Dimension (mm): 107x237x6, Measuring Range: 6 to 10, 1/4 inch to 3/4 inches nominal diameter, metric screws: (volts) inch screw M6 to M20 (nut) 1 / 4-5 / 8 inches, Weight (g): 55, Purpose: Gauge to measure bolt and nut size., Gauge to measure bolt and nut size., Caution: Never use solvents such as thinner, benzine, etc., Never use solvents such as thinner, benzine, etc.
分類 標準儀/量規 > 其他量具
直角尺 JIS2級
Otokomae MonotaRO
26.99 - $72.99
分類 標準儀/量規 > 直角尺·水平儀 > 直角尺 > 平型廣場
循環計(12.7寬)
NAGAI GAUGES
68.99 - $119.99
Number of Leafs: 19
分類 標準儀/量規 > 塞尺 > 疾病計(集)
鋼制底座拐尺 JIS2級
Ohnishi Mfg
5.00(1)
33.99 - $94.99
Material: SS400, Purpose: For general work, For general work
分類 標準儀/量規 > 直角尺·水平儀 > 直角尺 > 廣場基地
針規集
No Brand
4.33(3)
309.99 - $739.99
分類 標準儀/量規 > 針規 > Set items
鋼制平形拐尺 JIS2級
Ohnishi Mfg
4.00(2)
44.99 - $129.99
Material: SS400, Purpose: For general work, For general work
分類 標準儀/量規 > 直角尺·水平儀 > 直角尺 > 平型廣場
塞尺
Futaba Gauge Works
5.00(1)
28.99 - $69.99
Length (m): 3, Tape Width (mm): 12.7, Purpose: Height adjustment of machines, nterspace measurement, etc., Height adjustment of machines, nterspace measurement, etc.
分類 標準儀/量規 > 塞尺 > 填料表
直角尺
Shinwa Rules
5.00(3)
$18.99
Shape: Right angle flat type, Pole Thickness (mm): 1.5, Material (Rod): SUS420J2 , Material (Unit): SUS410, Pole Width (mm): 18, Stand Length (mm): 94, Stand Width (mm): 18, Stand Thickness (mm): 8, Purpose: Used the right angle of the inside and outside corners, it is used to verify the right angle of processing materials and products., Used the right angle of the inside and outside corners, it is used to verify the right angle of processing materials and products., Used the right angle of the inside and outside corners, it is used to verify the right angle of processing materials and products., Used the right angle of the inside and outside corners, it is used to verify the right angle of processing materials and products.
分類 標準儀/量規 > 直角尺·水平儀 > 直角尺 > 廣場基地
鑄鐵制精密V型臺B型機械加工
Ohnishi Mfg
4.50(6)
79.99 - $299.99
Material: FC250, Dimensions E (mm): 3, Parallelism (mm): 0.05
分類 標準儀/量規 > 平臺 > V塊(表圈表),X型塊
針規 套裝 AA
SK
309.99 - $899.99
Purpose: Used for measuring hole diameter, hole core spacing, location,and groove width, Used for measuring hole diameter, hole core spacing, location,and groove width, Used for measuring hole diameter, hole core spacing, location,and groove width, Used for measuring hole diameter, hole core spacing, location,and groove width
分類 標準儀/量規 > 針規 > Set items
針尺上升
No Brand
13.99 - $17.99
Roundness / Cylindricity (microm): 0.8, Pricision (micrometer): +/-1.0, Gauge Length (mm): 50, Purpose: Used for measuring hole diameter, hole core spacing, location, slant (paralell), groove width, depth, are, and eccentric, Used for measuring hole diameter, hole core spacing, location, slant (paralell), groove width, depth, are, and eccentric
分類 標準儀/量規 > 針規 > Individual
螺距規(惠氏外螺紋)
FUJI TOOL
5.00(1)
50.99 - $68.99
Ridge Angle (degree): 55
分類 標準儀/量規 > 螺距規
鑄鐵制精密V型塊A型
MonotaRO
40.99 - $169.99
Material: FC25
分類 標準儀/量規 > 平臺 > V塊(表圈表),X型塊
圓柱形錐度量規 No.715A
SK
5.00(1)
$119.99
ADD TO CART
Type: Taper gauge, Material: SK material (carbon tool steel), Overall Length (mm): About118.5, Weight (g): 33, Measuring Range (mm): 0.1 to 3, Angle (Degree): (Taper) 5degree 43'29 ", Pricision (mm): +/-0.05, Minimum Scale (mm): 0.1
分類 標準儀/量規 > 錐度計
鋼制四棱平尺(斜面型)A級加工
Ohnishi Mfg
5.00(1)
50.99 - $189.99
Type: Class A finish, Material: Carbon tool steels
分類 標準儀/量規 > 直角尺·水平儀 > 直形水準測量尺 > 斜角型
帶座直角尺 JIS2級
Otokomae MonotaRO
20.99 - $61.99
Material: SS
分類 標準儀/量規 > 直角尺·水平儀 > 直角尺 > 廣場基地
鋼制平形拐尺 JIS1級
Ohnishi Mfg
63.99 - $219.99
Material: SS400
分類 標準儀/量規 > 直角尺·水平儀 > 直角尺 > 平型廣場
錐度計
SK
5.00(2)
16.99 - $129.99
分類 標準儀/量規 > 錐度計
完成大豆
TRUSCO
$17.99
ADD TO CART
Application: Rectangular inspection. Scribe on right angle., Specification: Rod section scaled surface: Metric scale. Back: Metric scale framing., TRUSCO Part Number: 232-7279, Material: SUS420J 2 or equivalent, Width (mm): 18, Thickness (mm): 1.5, Dimension (mm): 180x101, Weight (g): 102, Stand Thickness (mm): 6.5, Stand Width (mm): 18, 2014 TRUSCO Published Page: 1-0883, Purpose: Rectangular inspection. Scribe on right angle., Rectangular inspection. Scribe on right angle.
分類 標準儀/量規 > 直角尺·水平儀 > 直角尺 > 廣場基地
塞尺(芯調板)
SHIM & GAUGE
4.33(9)
$23.99
ADD TO CART
Set Contents: Thickness (mm) x number of sheets /0.2x2, 0.3x3, 0.5x4, 1.0x3, 1.6x1, 2.0x1, 3.0x1, Length (mm): 120, Width (mm): 20
分類 標準儀/量規 > 塞尺 > 疾病計(集)
倒角測定尺
TRUSCO
$24.99
ADD TO CART
Application: Periphery chamfering measurement of workpiece made with lathe, special purpose lathe, and turret lathe. Milling machine drilling machine chamfering and hole chamfering measurement., Specification: Chamfering, Material: SUS420J2, Measuring Range: 0.5 - 15, Weight (g): 20
分類 標準儀/量規 > 倒角規
帶座直角尺
SK
4.50(2)
28.99 - $90.99
Material (Rod): SS material (SS400), Material (Unit): S45C material
分類 標準儀/量規 > 直角尺·水平儀 > 直角尺 > 廣場基地
塞尺
Shinwa Rules
6.99 - $35.99
Material: Body: carbon tool steel, Purpose: Gauge to measure gap by inserting., Gauge to measure gap by inserting., Caution: Never force to insert leaf etc., Never force to insert leaf etc.
分類 標準儀/量規 > 塞尺 > 疾病計(集)
螺距規(尺度基準)
FUJI TOOL
5.00(3)
54.99 - $68.99
Ridge Angle (degree): 60
分類 標準儀/量規 > 螺距規

1 2 3 4 5 6 7 8 9 10 ...37