標準儀/量規

Purpose: Measurements of groove, gap, hole diameter and length., Measurements of groove, gap, hole diameter and length., Measurements of groove, gap, hole diameter and length., Measurements of groove, gap, hole diameter and length., Overall Length x Thickness (mm) (Te - PA - GE - di): 148.5x1.2, Overall Length x Thickness (Scale) (mm): 155x0.5, Finishing: Hard chrome plating, Minimum Scale (mm): 0.1, Pricision (mm): +/-0.05, Measuring Range (mm): (Taper gauge) 1-15, (linear scale) 0-130 , Material: Hardened stainless steel, Type: Taper gauge

Leaf Width (mm): 12.7

Length (m): 1, Width (mm): 12.7

Minimum Indication (mm): 1, Surface Processing: Polished finish scale/ Etching, Material: Rod / stainless steel Stand/carbon steel

Finishing: Hard chrome plating, Pricision (mm): +/- 0.05 (Taper gauge) +/- 0.15 (linear scale), Hardness: Hv360 - 495, Measuring Range (mm): (Taper gauge) 1-15, (linear scale) 0-150 , Weight (g): 20, Thickness (mm): 1.2 (Taper gauge), 0.5 (linear scale), Length (mm): 160, Material: Stainless steel, TRUSCO Part Number: 332-5865

Finishing: Hard chrome plating, Minimum Scale (mm): 0.05, Pricision (mm): +/-0.04, Overall Length (mm): 160, Width (mm): 11, Material: SC material, Type: Taper gauge

Finishing Material: Mild steel / polished finish

Leaf Width (mm): 12.7, JIS Standard: B7524

Purpose: R section, R section

Leaf Width (mm): 12.7

Plate Thickness (mm): 1.2, Instrumental Error (mm): +/-0.05, Scale Interval (mm): 0.1, Hardness: HV480, Type: Taper gauge

Purpose: Deburring measurement gauge, Deburring measurement gauge, Pricision (mm): +/-0.03, Material: Made of stainless steel (SUS430)

Purpose: Since the finishing is right angle, it is available to a simple horizontal boring and milling work and a lathe work., Since the finishing is right angle, it is available to a simple horizontal boring and milling work and a lathe work., Material: FC250

Tape Width (mm): 12.7, Length (m): 1

Minimum Measurable Value: 0.1mm , Finishing: Hard chrome plating, Pricision: +/-0.05mm, Measuring Range (mm): 1 - 6 , Overall Length (mm): About 93, Material: SK MATERIAL (CARBON STEEL), Type: Taper gauge

Purpose: Female screw inspection, Female screw inspection

Purpose: Height adjustment of machines, nterspace measurement, etc., Height adjustment of machines, nterspace measurement, etc., Height adjustment of machines, nterspace measurement, etc., Height adjustment of machines, nterspace measurement, etc., Tape Width (mm): 12.7, Length (m): 1

Minimum Scale (mm): 0.1, Pricision (mm): +/-0.1, Surface Processing: Chromium electroplating, Measuring Range (mm): 1 to 15, Weight (g): 15, Overall Length (mm): 150, Thickness (mm): About 1, Width (mm): 17, Material: Stainless hardened steel

Purpose: Adjust framework 45 degree and inspect the work timber perpendicularly., Adjust framework 45 degree and inspect the work timber perpendicularly., Adjust framework 45 degree and inspect the work timber perpendicularly., Adjust framework 45 degree and inspect the work timber perpendicularly., Stand Thickness (mm): 5, Stand Length (mm): 163, Pole Width (mm): 100, Angular Pricision (mm): 45degree: 0.2/100 90degree: 0.1/100, Pole Length (mm): 170, Pole Thickness (mm): 1.5, Dimension (mm): 170x100x1.5, Material: Scale plate: stainless steel SUS420J2 STAND: STAINLESS STEEL SUS304FB

Caution: To avoid rust, remove dirt, apply oil and keep cleanly after use., To avoid rust, remove dirt, apply oil and keep cleanly after use., Purpose: Gauge to measure standard screw pitch., Gauge to measure standard screw pitch., Material: Carbon tool steels

Finishing Material: Stainless steel (0.6mm thickness) (SUS430)

Leaf Width (mm): 12.7, Material: Carbon tool steels

Minimum Scale Value: 1mm/1/16 ", Scale (mm): 300, Material: Body: zinc die-cast scale: Steel

Point Angle (Degree): 118degree, Dimension (mm): 110x22, Thickness (mm): 10.3, Material: Tool steel (SK material), Type: Drill edge gauge

Material: Carbon tool steels

Purpose: Inner diameter measurement, pore diameter measurement, interspace measurement, Inner diameter measurement, pore diameter measurement, interspace measurement, Inner diameter measurement, pore diameter measurement, interspace measurement, Inner diameter measurement, pore diameter measurement, interspace measurement, Pricision (mm): +/-0.05 (for the measuring range), Hardness: Hv360 - 495, Measuring Range (mm): 1 - 15, Weight (g): 25, Dimension (mm): 155x20x6 (at the time of storage), Length (mm): 155, Material: Stainless, Specification: Pocket clip, strap