訂單總金額超過 * S$200* 免運費

標準儀/量規

排序:
共 2,208 條結果, 第 1 - 30 條
顯示: 30 60 90
視圖: 網格視圖 列表視圖
錐形塞規附帶直尺
SK
4.50(2)
24.99 SGD
ADD TO CART
Type: Taper gauge, Material: Hardened stainless steel, Measuring Range (mm): (Taper gauge) 1-15, (linear scale) 0-130 , Pricision (mm): +/-0.05, Minimum Scale (mm): 0.1, Finishing: Hard chrome plating, Overall Length x Thickness (Scale) (mm): 155x0.5, Overall Length x Thickness (mm) (Te - PA - GE - di): 148.5x1.2, Purpose: Measurements of groove, gap, hole diameter and length., Measurements of groove, gap, hole diameter and length., Measurements of groove, gap, hole diameter and length., Measurements of groove, gap, hole diameter and length.
分類 標準儀/量規 > 錐度計
塞尺
MonotaRO
7.59 - 56.99 SGD
Leaf Width (mm): 12.7
分類 標準儀/量規 > 塞尺 > 疾病計(集)
測隙規 縫隙用帶
TRUSCO
4.67(3)
13.99 - 169.90 SGD
Width (mm): 12.7, Length (m): 1
分類 標準儀/量規 > 塞尺 > 填料表
帶刻度帶臺直角尺
MonotaRO
11.99 - 17.99 SGD
Material: Rod / stainless steel Stand/carbon steel, Surface Processing: Polished finish scale/ Etching, Minimum Indication (mm): 1
分類 標準儀/量規 > 直角尺·水平儀 > 直角尺 > 廣場基地
錐度計直
Shinwa Rules
4.50(2)
19.99 SGD
ADD TO CART
TRUSCO Part Number: 332-5865, Material: Stainless steel, Length (mm): 160, Thickness (mm): 1.2 (Taper gauge), 0.5 (linear scale), Weight (g): 20, Measuring Range (mm): (Taper gauge) 1-15, (linear scale) 0-150 , Hardness: Hv360 - 495, Pricision (mm): +/- 0.05 (Taper gauge) +/- 0.15 (linear scale), Finishing: Hard chrome plating
分類 標準儀/量規 > 錐度計
錐形塞規
SK
5.00(7)
38.99 - 48.99 SGD
Type: Taper gauge, Material: SC material, Width (mm): 11, Overall Length (mm): 160, Pricision (mm): +/-0.04, Minimum Scale (mm): 0.05, Finishing: Hard chrome plating
分類 標準儀/量規 > 錐度計
普通型直邊鋼
NIIGATA RIKEN SOKUHAN
5.00(1)
43.99 - 99.99 SGD
Finishing Material: Mild steel / polished finish
分類 標準儀/量規 > 直角尺·水平儀 > 直形水準測量尺 > 平麵類型
JIS塞尺(12.7寬)
NAGAI GAUGES
5.00(2)
96.99 - 679.90 SGD
JIS Standard: B7524, Leaf Width (mm): 12.7
分類 標準儀/量規 > 塞尺 > 疾病計(集)
塞尺12.7寬
TRUSCO
4.83(6)
13.99 - 78.99 SGD
分類 標準儀/量規 > 塞尺 > 疾病計(集)
半徑規L300型套裝
FUJI TOOL
199.90 - 3,299.00 SGD
Purpose: R section, R section
分類 標準儀/量規 > 半徑規
JIS塞尺
Futaba Gauge Works
32.99 - 229.90 SGD
Leaf Width (mm): 12.7
分類 標準儀/量規 > 塞尺 > 疾病計(集)
錐度計
SK
4.14(7)
15.99 - 24.99 SGD
Type: Taper gauge, Hardness: HV480, Scale Interval (mm): 0.1, Instrumental Error (mm): +/-0.05, Plate Thickness (mm): 1.2
分類 標準儀/量規 > 錐度計
C面測定規
FUJI TOOL
119.90 SGD
Pricision (mm): +/-0.03
分類 標準儀/量規 > 倒角規
圓柱形錐度量規 No.710A
SK
5.00(1)
48.99 SGD
ADD TO CART
Type: Taper gauge, Material: SK MATERIAL (CARBON STEEL), Overall Length (mm): About 93, Measuring Range (mm): 1 - 6 , Pricision: +/-0.05mm, Finishing: Hard chrome plating, Minimum Measurable Value: 0.1mm
分類 標準儀/量規 > 錐度計
填充帶
MonotaRO
8.79 - 19.99 SGD
Length (m): 1, Tape Width (mm): 12.7, Purpose: Height adjustment of machines, nterspace measurement, etc., Height adjustment of machines, nterspace measurement, etc., Height adjustment of machines, nterspace measurement, etc., Height adjustment of machines, nterspace measurement, etc.
分類 標準儀/量規 > 塞尺 > 填料表
普通型角碼(PENGLASS)
Ohnishi Mfg
3.00(4)
43.99 - 1,299.00 SGD
Material: FC250, Purpose: Since the finishing is right angle, it is available to a simple horizontal boring and milling work and a lathe work., Since the finishing is right angle, it is available to a simple horizontal boring and milling work and a lathe work.
分類 標準儀/量規 > 平臺 > 角板
螺紋塞規
Sokuhansha
4.40(5)
149.90 - 199.90 SGD
Purpose: Female screw inspection, Female screw inspection
分類 標準儀/量規 > 螺紋量規 > 限量表
半徑規178型
FUJI TOOL
4.67(6)
76.99 - 299.90 SGD
分類 標準儀/量規 > 半徑規
活塞塊塞規(測厚帶)
NAGAI GAUGES
5.00(1)
22.99 - 58.99 SGD
Length (m): 1, Tape Width (mm): 12.7
分類 標準儀/量規 > 塞尺 > 填料表
螺紋塞規(JIS2級)
OSG
5.00(1)
219.90 - 539.90 SGD
分類 標準儀/量規 > 螺紋量規 > 限量表
間距計
Shinwa Rules
17.99 SGD
Material: Carbon tool steels, Purpose: Gauge to measure standard screw pitch., Gauge to measure standard screw pitch., Caution: To avoid rust, remove dirt, apply oil and keep cleanly after use., To avoid rust, remove dirt, apply oil and keep cleanly after use.
分類 標準儀/量規 > 螺距規
固定型水準角尺
Shinwa Rules
22.99 - 38.99 SGD
Material: Scale plate: stainless steel SUS420J2 STAND: STAINLESS STEEL SUS304FB, Dimension (mm): 170x100x1.5, Pole Thickness (mm): 1.5, Pole Length (mm): 170, Angular Pricision (mm): 45degree: 0.2/100 90degree: 0.1/100, Pole Width (mm): 100, Stand Length (mm): 163, Stand Thickness (mm): 5, Purpose: Adjust framework 45 degree and inspect the work timber perpendicularly., Adjust framework 45 degree and inspect the work timber perpendicularly., Adjust framework 45 degree and inspect the work timber perpendicularly., Adjust framework 45 degree and inspect the work timber perpendicularly.
分類 標準儀/量規 > 直角尺·水平儀 > 直角尺 > 其他正方形
C平面測量儀
TRUSCO
119.90 - 139.90 SGD
Finishing Material: Stainless steel (0.6mm thickness) (SUS430)
分類 標準儀/量規 > 倒角規
鋼制四棱平尺(普通型)A級加工
Ohnishi Mfg
5.00(2)
54.99 - 199.90 SGD
Material: Carbon tool steels
分類 標準儀/量規 > 直角尺·水平儀 > 直形水準測量尺 > 平麵類型
300mm 組合式角尺
ESCO
1.00(1)
29.99 SGD
ADD TO CART
Material: Body: zinc die-cast scale: Steel, Scale (mm): 300, Minimum Scale Value: 1mm/1/16 "
分類 標準儀/量規 > 直角尺·水平儀 > 直角尺 > 組合廣場
鑽頭角度規
SK
2.50(2)
43.99 SGD
ADD TO CART
Type: Drill edge gauge, Material: Tool steel (SK material), Thickness (mm): 10.3, Dimension (mm): 110x22, Point Angle (Degree): 118degree
分類 標準儀/量規 > 鑽頭尖端檢測
疾病計
SK
3.75(4)
9.99 - 53.99 SGD
Material: Carbon tool steels, Leaf Width (mm): 12.7
分類 標準儀/量規 > 塞尺 > 疾病計(集)
塊規
Mitutoyo
4.80(5)
29.99 - 299.90 SGD
分類 標準儀/量規 > 塊規(規塊) > Individual
斜面刀口尺
NIIGATA RIKEN SOKUHAN
5.00(1)
45.99 - 129.90 SGD
Material: Steel
分類 標準儀/量規 > 直角尺·水平儀 > 直形水準測量尺 > 斜角型
錐形塞規附帶金屬保護盒
Shinwa Rules
3.40(5)
15.99 SGD
ADD TO CART
Specification: Pocket clip, strap, Material: Stainless, Length (mm): 155, Dimension (mm): 155x20x6 (at the time of storage), Weight (g): 25, Measuring Range (mm): 1 - 15, Hardness: Hv360 - 495, Pricision (mm): +/-0.05 (for the measuring range), Purpose: Inner diameter measurement, pore diameter measurement, interspace measurement, Inner diameter measurement, pore diameter measurement, interspace measurement, Inner diameter measurement, pore diameter measurement, interspace measurement, Inner diameter measurement, pore diameter measurement, interspace measurement
分類 標準儀/量規 > 錐度計

1 2 3 4 5 6 7 8 9 10 ...74