TRUSCO Part Number: 294-6718, Length (mm): 155, Thickness (mm): 31, Height (mm): 56, Weight (g): 324, Power: AAA battery x 3pcs (included), Minimum : 0.1 degree or 0.1%, Angle (Degree): 360 degree (detection range) 4 directions 90, and 4 directions 99.9% , Continuous Opreration Time: About 600 hours(at the time of alkaline dry cell use), Functions: AUTO POWER OFF (AFTER 6 minitues. or so after operation starts), BATTERY CHARGE WARNING (LIQUID CRYSTAL DISPLAY), Display Mode: Reg. mode, comparison mode switchable, Purpose: For measurement of horizontal, parallel, and angle of inclination, For measurement of horizontal, parallel, and angle of inclination
Accessories: Soft case, TRUSCO Part Number: 405-0541, Dimension (mm): 230, Material (Body): Aluminum, Weight (g): 270, Operating Temperature Range (deg C): 0 - 45, Pricision: (Digital precision) / 0 degree +/- 0.05 degree, 90 degree / +/- 0.2 degree, Functions: Loudly horizontal / vertical, any angle makes
Easy precision with compensation, digital anti turning ability with
THE AUTO POWER-OFF THREE MINUTES WITH MAGNET, Batteries: CR 2032 X 2 PCS, Buzzer Sound: (Setting) 0 degree, 90 degree, and angle (any of) HOLD
PRESS THE HOLD BUTTON TWO TIMES AT ANY ANGLE YOU CAN SET ELECTRONIC SOUNDS.POWER GOES OFF THE RECORD WILL BE ERASED.ELECTRONIC SOUND CAN ALSO SWITCH ON/OFF AND MODE BUTTON HOLD., Vial Sensitivity: 0.57mm/m=0.0328 degree, Precision of Bubble Tube: Within [ +/-1.7 mm/m=+/-0.0984d...
Accessories: Includes 1 CR2032 (LITHIUM BATTERY) for test, Specification: Magnaet attached on the bottom, TRUSCO Part Number: 362-2452, Material: Aluminum, Measuring Range: +/-180.0degree, Weight (g): 120, Operating Temperature Range (deg C): 5 - 45, Power: CR2032 (LITHIUM BATTERY), Pricision: Reading / +/- 0.2 degree, Minimum Value (degree): 0.1, Purpose: angle measurement and assembly of mashine, mold and tools. Angulation of processing standard, angle measurement and assembly of mashine, mold and tools. Angulation of processing standard, angle measurement and assembly of mashine, mold and tools. Angulation of processing standard, angle measurement and assembly of mashine, mold and tools. Angulation of processing standard, Caution: Reading accuracy / quantization error (+/-1 count) not i...
Accessories: 3 Pieces of chalk, TRUSCO Part Number: 308-1478, Weight (g/pc): 30, Compatible Dimensions (mm): 9.8 - 12, Purpose: To fill in for work on the blackboard., To fill in for work on the blackboard.
Weight (g): 690, Power: AAA batteries x2 book, Minimum : (Percent displayed to two decimal places in terms of units in the 0.1 degree) 0.1 degree, Dimension (Length L x Width W x Thickness) (mm): 600x60x27, Display: Buzzer sound (switchable degree /%) 0 degree / 45 degree / 90 degree position when a liquid crystal display, Light Source: 635nm red semiconductor laser, Operating Temperature and Humidity Range: -5deg C - (non-condensing) 90% less than +50 deg C, Beam Diameter: (- 300LX when 200 interior illuminance) phi3mm about 5m in irradiation position, Optical Output: Less than 1mW Class 2 (JIS C6802: 2005), Laser Light Precision: +/-2mm/5m (point laser irradiation), Precision of Bubble Tube: +/-1.0mm / m = +/-0.057 degree, Detection Accuracy: +/-0.1 degree left other than = +/-0.2 degree...
Application: For all work requires a gradient and angle such as steel structure, construction, plumbing and drainage., Size: 95 x 95 (1 side x 1 side ) x (thickness) 30 mm, Pricision: +/- 0.5 degree, Inclination Angle: One scale =1degree90degree-0degree-90degree(180degree), Gradient Display: 2-, 3-, 4-, 5-, 6- 7and 8 minutes and 1.0% , 1.2% , 1.5% , 1.8% , 2.0% ,3.0% and 5.0%.Other than the above , please refer to the back of the product for further information such as angle balance or gradient method etc .
Specification: ABS resin Rotary Waterproof type, TRUSCO Part Number: 410-5125, Sensitivity (mm/m): 0.50=0.0286 degree, Dimensions (Length L x Width W x Height H) (mm): 20x150x250, Body Weight (g): 295, Pricision: +/- 17.5 mm / m = +/- 1.0 degree within, Color (Body): Black (skeleton), Purpose: For revolution type goniometry
For engineering works, For revolution type goniometry
For engineering works