訂單總金額超過 * S$200* 免運費

聚酰亞胺膠帶

排序:
共 27 條結果, 第 1 - 27 條
顯示: 30 60 90
視圖: 網格視圖 列表視圖
聚醯亞胺膠帶
TERAOKA SEISAKUSHO
4.14(7)
25.99 - 48.99 SGD
Description 2: Electrical equipment requiring heat resistance insulator, Tape Length (m): 20, Paper Tube Inside Diameter (mm): 75, Extensibility (%): 50, Tape Thickness (mm): 0.05, Adhesive: Silicone based, Base Material Thickness (mm): 0.025, Heat-Resistant Temperature (deg C): 200, Insulation Breakdown Voltage (kV): 7, Electrolytic Corrosion Coefficient: 1, Adhesive Force (N/10mm[gf]): 2.16[220], Adhesive Force (N/25mm[gf]): 5.39[550], Tensile Strength (N/25mm[kgf]): 122.6[12.5], Tensile Strength (N/10mm [kgf]): 49[5.0], Purpose: Between layer of trance and coil etc, wrapping insulation Heatproof masking of solder coat and plating etc of printed circuit board
分類 聚酰亞胺膠帶
3M 聚醯亞胺膠帶 5413
ThreeM 3M
4.50(2)
169.90 - 239.90 SGD
Color: Brown, Base Material: Polyimide film, Operating temperature Limits: -73-260 degree C, Tape Length (m): 33, Tape Thickness (mm): 0.07, Adhesive: Silicone based, Adhesive Power (N/10mm): 2.78, Tensile Strength (N/10mm): 51, Purpose: Printed circuit board soldering processes masking. Masking that requires heat-resistance, including others. Heat resistant coating, heat resistant protection.
分類 聚酰亞胺膠帶
雙面電氣絕緣用聚醯亞胺膠帶 (耐熱級180℃/H種)
Permacel
139.90 - 199.90 SGD
Color: Amber, Base Material: 25 micron Kapton film, Tape Length (m): 33, Withstand Voltage: 8500V, Tape Thickness (mm): 0.114, Adhesive: Silicone series, Elongation (%): 50, Insulation Resistance (Mohm): 1x106, Heat-Resistant Temperature (deg C): 205 (3 hours), 180 (continuous), Adhesive Force: 278g/cm (for steel), Electrolytic Corrosion Coefficient: 1, Tensile Strength (kgf/cm): 5.3, Cure Condition: (Thermosetting) 205 deg C / 3 hours, UL Standards: File No.E20392 UL-510 Flame Retardant (flame-retardant), MIL Standard: MIL-P-46112
分類 聚酰亞胺膠帶
電絕緣性卡普頓膠帶(耐熱等級180 degree C/H類)
Permacel
64.99 - 96.99 SGD
Thickness (mm): 0.069, Color: Amber, Base Material: 25-micron Kapton film, Withstand Voltage: 7500V, Tape Thickness (mm): 0.069, Adhesive: Silicone based, Elongation (%): 60, Insulation Resistance (Mohm): 1x106, Electrolytic Corrosion Coefficient: 1.0, Tensile Strength (kgf/cm): 5.3, Cure Condition: (Heat hardening) 205 deg C/3 hours, Unwinding Force: 500 g/cm (necessary strength to rewind 150 Feet in 1 minute), MIL Standard: MIL-P-46112, Purpose: High heat resistant wire bundling, high frequency motor and traction motor insulation, small bobbin coil exterior insulation, magnet wire bonding, web solder board connector masking, vacuum based deposition electronic component temporary stops., Caution: From 2009 October 1st, Permacel brand was unioned to Nikko Denko brand. Packaging specificat...
分類 聚酰亞胺膠帶
聚醯亞胺雙面膠 NO.760H #25
TERAOKA SEISAKUSHO
4.67(6)
27.99 - 279.90 SGD
Base Material: Kapton film, Tape Length (m): 20, Tape Thickness (mm): 0.145, Adhesive: First face silicone second face silicone, Adhesive Force (N/25mm): 11.03 (to stainless steel), Shear Bond Strength (N/400mm2): 196.1, Purpose: To fix and insulation of heat receiveing portion. Heat transport process for parts.
分類 聚酰亞胺膠帶
Kapton電氣絕緣膠帶(耐熱等級180°C / H型)
Permacel
119.90 - 179.90 SGD
Color: Amber, Base Material: 50 micron Kapton film, Tape Length (m): 33, Withstand Voltage: 11500, Tape Thickness (mm): 0.1, Adhesive: Silicone series, Adhesion (g/10mm): 278 (vs. steel), Elongation (%): 65, Tensile Strength (kgf/cm): 9.8, Unwinding Force: (Force required to unwind 150Feet per minute) 557g / cm, UL Standards: File No.E20392 UL-510 Flame Retardant (flame retardant), MIL Standard: MIL-P-46112, Purpose: High heat resistant wire bundling, high frequency motor and traction motor insulation, small bobbin coil exterior insulation, large rotation machine coil insulation, thermistor part outer insulation magnet wire bonding, web solder board connector masking, vacuum based deposition electronic component temporary stops., Caution: From 2009 October 1st, Permacel brand was unioned t...
分類 聚酰亞胺膠帶
聚醯亞胺膠帶 API-114A FR
CHUKOH CHEMICAL INDUSTRIES
4.75(4)
27.99 - 49.99 SGD
Base Material: Polyimide film[Y]Opposite side angle dimensions (mm), Tape Length (m): 10, Tape Thickness (mm): 0.06, Adhesive: Silicone based, Elongation (%): 70, Maximum Temperature (Degree C): 250, Tensile Strength (N/25mm): 150, Adhesive Force (N/25mm): 6, Purpose: Electrical insulation coating, various types of equipment for insulation, and others
分類 聚酰亞胺膠帶
聚醯亞胺膠帶
TERAOKA SEISAKUSHO
5.00(1)
38.99 - 48.99 SGD
Base Material: PI (polyimide), Tape Length (m): 20, Adhesive: Silicon series, Heat-Resistant Temperature (deg C): 200, Incombustibility: UL510 acceptable product, Purpose: Between layer of trance and coil etc, wrapping insulation. Heatproof masking of solder coat and plating etc of printed circuit board
分類 聚酰亞胺膠帶
聚醯亞胺膠帶 NO.652S #25
TERAOKA SEISAKUSHO
4.50(2)
48.99 - 259.90 SGD
Tape Length (m): 30, Tape Thickness (mm): 0.07, Elongation (%): 50, Tensile Strength (N/25mm): 122.6, Break Down Voltage (kV): 7
分類 聚酰亞胺膠帶
聚醯亞胺膠帶 NO.653F #25
TERAOKA SEISAKUSHO
58.99 - 299.90 SGD
Base Material: Kapton film , Tape Length (m): 50, Tape Thickness (mm): 0.055, Adhesive: Acrylic , Elongation (%): 50, Tensile Strength (N/25mm): 122.6, Break Down Voltage (kV): 7, Purpose: To fix and insulate parts required heatproof and thinness, for splicing of heat resistance film and TAB (film board).
分類 聚酰亞胺膠帶
用於耐熱掩蔽的聚酰亞胺膠帶7413D
ThreeM 3M
4.00(1)
25.99 - 199.90 SGD
Tape Length (m): 33, Tape Thickness (mm): 0.065, Elongation (%): 40, Heat-Resistant Temperature (deg C): 260, Adhesive Force (N/cm): 2.4, Tensile Strength (N/cm): 46
分類 聚酰亞胺膠帶
聚酰亞胺膠帶PIA 220
ThreeM 3M
2.50(2)
22.99 - 129.90 SGD
Tape Length (m): 33, Tape Thickness (mm): 0.05, Elongation (%): 35, Insulation Resistance (Mohm): >1x106, Adhesive Power (N/10mm): 3.1, Insulation Breakdown Voltage (kV): 5, Tensile Strength (N/10mm): 34.72, Rated Temperature (Degree c): 220
分類 聚酰亞胺膠帶
聚酰亞胺膠帶
AS ONE
19.99 - 43.99 SGD
分類 聚酰亞胺膠帶
Aspure聚酰亞胺膠帶
AS ONE
389.90 - 459.90 SGD
Tape Length (m): 33, Thickness (microm): 65(+/-6), Heat-Resistant Temperature (deg C): 220(30sec), Adhesive Force (gf/25mm): 650(+/-70)
分類 聚酰亞胺膠帶
聚酰亞胺膠帶API114AFR 0.08X19X20M
CHUKOH CHEMICAL INDUSTRIES
96.99 SGD
ADD TO CART
TRUSCO Part Number: 794-3938
分類 聚酰亞胺膠帶
聚酰亞胺膠帶API114AFR 0.08X25X20M
CHUKOH CHEMICAL INDUSTRIES
129.90 SGD
ADD TO CART
TRUSCO Part Number: 788-7523
分類 聚酰亞胺膠帶
聚酰亞胺膠帶API114AFR 0.08X13X20M
CHUKOH CHEMICAL INDUSTRIES
64.99 SGD
ADD TO CART
TRUSCO Part Number: 794-3920
分類 聚酰亞胺膠帶
電絕緣性卡普頓膠帶(耐熱等級155 degree C/F類)
Permacel
79.99 - 129.90 SGD
Color: Amber, Base Material: 25 micron Kapton film, Tape Length (m): 33, Withstand Voltage: 7000, Tape Thickness (mm): 0.064, Adhesive: Acrylic, Elongation (%): 70, Insulation Resistance (Mohm): 1x106, Heat-Resistant Temperature (deg C): 155 (continuous use), Adhesive Power (N/10mm): 4, Electrolytic Corrosion Coefficient: 1, Cure Condition: 150deg C / 1 hour (or thermoset) 135deg C / 2 hours, UL Standards: File No.E20392 UL-510 Flame Retardant (flame retardant), MIL Standard: MIL-P-46112, Purpose: Heat resistant. High voltage resistant. Solvent resistant. Freon resistant. High adhesive. For small dia coils outer insulation and magnet wire bundling. For insulation and bundling of chalk, toroid, trance, reactor, and solenoid etc., Caution: From 2009 October 1st, Permacel brand was unioned to...
分類 聚酰亞胺膠帶
聚酰亞胺膠帶No.6500
SLIONTEC
389.90 - 399.90 SGD
Tape Length (m): 20, Extensibility (%): 40, Tape Thickness (mm): 0.055, Tuck (ball No.): 25, Adhesive Power (N/10mm): 2.75, Tensile Strength (N/10 mm [kgf/25 mm]): 60[15.2], Tensile Strength (N/25mm): 150, Purpose: Heat resistant masking, heat-resistant equipment splice  For temporary fixing of the terminal coil
分類 聚酰亞胺膠帶
Polyimide electric insulation tape
ThreeM 3M
37.99 - 959.90 SGD
Purpose: Particularly for insulation applications requiring heat resistance and thinness, insulation for coils, transformers and capacitors., Caution: * On product characteristics, narrow width products may be misaligned with the tape body and the winding core, but there is no problem with the quality., *This product is manufactured in Japanese standards. Please check the specification before you order., *This product is manufactured in Japanese standards. Please check the specification before you order.
分類 聚酰亞胺膠帶
Chukoh flow heat resistant double-sided tape
CHUKOH CHEMICAL INDUSTRIES
74.99 - 149.90 SGD
Thickness (mm): 0.085, Length (m): 10, Tensile Strength: 75N/10mm, Adhesive Force: 2N/10mm, Maximum Temperature (Degree C): 250, Purpose: Temporary fixation at high temperature, temporary fixation at solder reflow, Caution: *This product is manufactured in Japanese standards. Please check the specification before you order., *This product is manufactured in Japanese standards. Please check the specification before you order.
分類 聚酰亞胺膠帶
Insulating heat-resistant polyimide tape
MonotaRO
4.00(6)
16.99 - 32.99 SGD
Thickness (mm): 0.055, Length (m): 33, Heat-Resistant Temperature (deg C): 250, Tensile Strength (N/25mm): 80, Adhesive Force (N/25mm): 3.5-5.5, Caution: *This product is manufactured in Japanese standards. Please check the specification before you order., *This product is manufactured in Japanese standards. Please check the specification before you order.
分類 聚酰亞胺膠帶
Polyimide heat-resistant masking tape
ThreeM 3M
25.99 - 32.99 SGD
Thickness (mm): 0.065, Length (m): 33, Tensile Strength: 46N/10mm, Adhesive Force: 2.4N/10mm, Adhesive Strength (N/mm): 2.4, Purpose: Soldering process of printed circuit board Masking, Others requiring heat resistance Masking, Heat resistant coating / Heat protection, Caution: * On product characteristics, narrow width products may be misaligned with the tape body and the winding core, but there is no problem with the quality., *This product is manufactured in Japanese standards. Please check the specification before you order., *This product is manufactured in Japanese standards. Please check the specification before you order.
分類 聚酰亞胺膠帶
Polyimide adhesive tape Tesa 51408
tesa
33.99 - 38.99 SGD
Thickness (mm): 0.065, Length (m): 33, Operating Temperature Range (deg C): -200-250, Break Down Voltage (kV): 7.5, Adhesive Strength (N/mm): 3.14, Purpose: Especially for interlayer insulation such as motors and transformers requiring heat resistance, conductor insulation, binding of motor coils, fixing of drawer, for terminal masking at printed circuit board soldering, Caution: *This product is manufactured in Japanese standards. Please check the specification before you order., *This product is manufactured in Japanese standards. Please check the specification before you order.
分類 聚酰亞胺膠帶
絕緣耐熱聚醯亞胺膠帶
Specification: [Tape thickness] 1/0.025(adhesive not included)-2.2/0.055(adhesive included) [Insulating level] UL H/200degreec, Material: Polyimide, Temperature Range (deg C): - 73-260, Tape Length (m): 33, Tensile Strength: 119.6N/25mm[12.2kgf], Tape Thickness (mm): 0.055, Adhesive: Silicon, Base Material Thickness (mm): 0.025, Elongation (%): 70, Adhesive Power (g/25mm): 5.59N/25mm[570gf] (opposing steel board), Insulation Breakdown Voltage (kV): 6.5, Tensile Strength (N/25mm[kgf]): 119.6[12.2]
分類 聚酰亞胺膠帶
Kapton Adhesive Tape No.650S
TERAOKA SEISAKUSHO
-
Color: Yellowish brown, Base Material: Kapton [[(R)]] film, Tape Length (m): 20, Core Diameter (mm): 76, Adhesive: Silicone series, Core Diameter (inch): 3, Purpose: For heat drying paint and masking of solder plating. For splice of heat resistant film and TAB(printed circuit board). For heat resistant process of part and heat resistant conveyance., Caution: Cutter is necessary for cutting.
分類 聚酰亞胺膠帶
聚酰亞胺膠帶
Color: Brown, Operating Temperature Range (deg C): -60 to 180, Base Material: Polyimide film, Tape Length (m): 20, Extensibility (%): 65, Tape Thickness (mm): 0.025, Adhesive: Silicone series, Insulation Breakdown Voltage (kV): 8, Tensile Strength (N/19mm:Reference Value): 145, Adhesive Strength (N/19 mm): 4.5
分類 聚酰亞胺膠帶

1