訂單總金額超過 * S$200* 免運費

剝離工具

排序:
共 163 條結果, 第 1 - 30 條
顯示: 30 60 90
視圖: 網格視圖 列表視圖
助焊劑鏨子
FUJI INDUSTRIAL TECHNIQUE
3.75(4)
229.90 - 379.90 SGD
Stroke (mm): 16 (piston), Hose Mouthpiece Mounting Screw: PT1/4
分類 剝離工具 > 風鎬
氣動錘
PAULSTRA
4.50(2)
96.99 SGD
ADD TO CART
Weight (kg): 1.36, Body Dimensions (Length x Width x Height) (mm): 170x51x165, Air Consumption (L/min): 310, Maximum Working Pressure (MPa): 0.59, Number of Blows (min-1 [times/min]): 3500, Size (mm): (Hammer bit)0.401 parker taper
分類 剝離工具 > 空壓衝擊錘
Needle Scaler Pistol Type
FUJI INDUSTRIAL TECHNIQUE
479.90 - 539.90 SGD
Overall Length (mm): 371, Weight (kg): 2.5, Needle Length (mm): 180
分類 剝離工具 > 空氣針頭定標器
Needle Scaler Straight
FUJI INDUSTRIAL TECHNIQUE
439.90 - 459.90 SGD
Overall Length (mm): 325, Weight (kg): 1.9, Needle Length (mm): 180
分類 剝離工具 > 空氣針頭定標器
NPK 風鏟 圓頭
Nippon Pneumatic Mfg
569.90 - 1,199.00 SGD
分類 剝離工具 > 風鎬
氣動錘(六角軸)
PAULSTRA
4.29(7)
59.99 - 149.90 SGD
Hexagon Opposite Side(mm): 10
分類 剝離工具 > 空壓衝擊錘
噴泉塔甘
NITTO KOHKI
5.00(1)
779.90 SGD
ADD TO CART
Accessories: Needle phi2x 150 mm x 58 pieces (29 mounted on inner main unit) Air hose Assy (with coupler 30PH) x 1 piece Coupler 200 - 30SHx1 piece, Specification: Light weight type, TRUSCO Part Number: 116-6000, Type: Pneumatic high speed multi needle chisel, Weight (kg): 1.4, Main Part Dimension (mm): 158x150, Number of no-load Blows -1: 4000, Air Consumption (m3/min): 0.15, Working Pressure (MPa [kgf/cm2]): 0.59[6], Standard Length of Needle (mm): 150, Needle Diameter , Quantity: phi2 X 29, Piston Diameter (phi mm): 16
分類 剝離工具 > 空中鑿子
氣鏨
NITTO KOHKI
699.90 SGD
ADD TO CART
Accessories: Flat chisel: 1002 x 1 piece Moil point chisel: 1024 x 1 piece Air hose Assy (with coupler 30PH) x 1 piece Coupler: 200-30SHx1 piece, TRUSCO Part Number: 116-6981, Type: High-speed pneumatic chisel, Overall Length (mm): 185 (A-300 Main body), Weight (kg): 1.7, Number of no-load Blows -1: 2600, Air Consumption (m3/min): 0.3, Working Pressure (MPa [kgf/cm2]): 0.59[6]
分類 剝離工具 > 氣鑿
氣動風鏟
NITTO KOHKI
5.00(1)
379.90 SGD
Working Pressure (MPa [kgf/cm2]): 0.59[6]
分類 剝離工具 > 風鎬
助焊劑
YOKOTA INDUSTRIAL
3.00(1)
199.90 - 249.90 SGD
Working Pressure (MPa): 0.4 to 0.6, Hose Mounting Nozzle: Rc1/4, No-load Blows Number (min-1): 12000, 2014 TRUSCO Published Page: 2-1588, Purpose: Chipping work of stonework, woodwork, and aluminum.
分類 剝離工具 > 風鎬
氣動針束除鏽器(空氣式高速多針除鏽器)
NITTO KOHKI
959.90 SGD
ADD TO CART
Accessories: Needle phi3x 180 mm x 24 pieces (12 mounted on inner main unit) Air hose Assy (with coupler 30PH) x 1 piece Coupler 200 - 30SHx1 piece, Specification: Low vibration type, TRUSCO Part Number: 116-6034, Overall Length (mm): 244 (Main body), Weight (kg): 2.75, Number of no-load Blows -1: 4000, Air Consumption (m3/min): 0.2, Working Pressure (MPa [kgf/cm2]): 0.59[6], Standard Length of Needle (mm): 180, Needle Diameter , Quantity: phi2x29, phi3x12, Piston Diameter (phi mm): 20
分類 剝離工具 > 空中鑿子
噴射虎(氣動高速多針夾)
NITTO KOHKI
1,299.00 SGD
ADD TO CART
Accessories: Needle phi3x 180 mm x 46 pieces (23 mounted on inner main unit) Needle phi2x180mmx106 pieces Needle supporter phi2x1 piece Hexagonal rod spanner 6mm x 1 piece Air hose Assy (with coupler 30PH) x1 piece Coupler 200-30SHx1 piece, Specification: General-purpose type, TRUSCO Part Number: 116-6042, Description 2: Hard steel wire needle that reciprocates at very high speed, 3700 to 6000 times per minute. Lightweight-strong type, optional lineup that meets needs., Overall Length (mm): 237 (Main body), Weight (kg): 2.7, Number of no-load Blows -1: 4000, Air Consumption (m3/min): 0.3, Working Pressure (MPa [kgf/cm2]): 0.59[6], Standard Length of Needle (mm): 180, Needle Diameter , Quantity: phi2x53, phi3x23, Piston Diameter (phi mm): 24
分類 剝離工具 > 空中鑿子
噴射虎(氣動高速多針夾)
NITTO KOHKI
5.00(1)
879.90 SGD
ADD TO CART
Accessories: Needle phi3x 180 mm x 24 pieces (12 mounted on inner main unit) Air hose Assy (with coupler 30PH) x 1 piece Coupler 200 - 30SHx1 piece, Specification: General-purpose type, TRUSCO Part Number: 116-6026, Overall Length (mm): 245 (Main body), Weight (kg): 2.4, Number of no-load Blows -1: 4000, Air Consumption (m3/min): 0.2, Working Pressure (MPa [kgf/cm2]): 0.59[6], Standard Length of Needle (mm): 180, Needle Diameter , Quantity: phi2x29, phi3x12, Piston Diameter (phi mm): 20
分類 剝離工具 > 空中鑿子
氣動風鏟套裝
ESCO
4.67(3)
139.90 SGD
ADD TO CART
ESCO Part Number: EA159SA, Stroke (mm): 66, Overall Length (mm): 210, Weight (kg): 1.6, Working Pressure (MPa): 0.64, Blows (min-1 [times/minute]): 3000, Case Dimension (mm): 320x250x95, Air Consumption (L/min): 157, Indispensability Compressor (kw): 1.5, Suction Port Size: 1/4inchPT
分類 剝離工具 > 氣鑿
氣動針束除鏽器
NITTO KOHKI
649.90 SGD
ADD TO CART
Accessories: Needle phi3x 180 mm x 3 pieces (mounted on main unit) Air hose Assy (with coupler 30PH) x 1 piece Coupler 200 - 30SHx1 piece, Specification: Compact and light weight type, TRUSCO Part Number: 116-6018, Type: Pneumatic high speed multi needle chisel, Overall Length (mm): 190 (Main body), Weight (kg): 0.98, Number of no-load Blows -1: 6000, Air Consumption (m3/min): 0.07, Working Pressure (MPa [kgf/cm2]): 0.59[6], Standard Length of Needle (mm): 180, Needle Diameter , Quantity: phi2x7, phi3x3
分類 剝離工具 > 空中鑿子
輕型尖頭鑿岩錘
TOKU PNEUMATIC
4.00(1)
649.90 SGD
ADD TO CART
Specification: Junk size /phi17.45, TRUSCO Part Number: 332-4907, Stroke (mm): 79, Overall Length (mm): 330, Weight (kg): 5.9, Type: Marukomi, Blows (min-1 [times/minute]): 2400, Hose Inside-Diameter (phi mm): 12.7(1/2), Air Consumption (m3/min): 0.5, Air Inlet(inch): 41706, Piston Diameter (phi mm): 28, 2014 TRUSCO Published Page: 2-1590
分類 剝離工具 > 空壓衝擊錘
氣鑿套裝
GREAT TOOL
3.17(6)
87.99 SGD
ADD TO CART
Set Contents: Air gouging body One touch plug 1/4 Sealing tape Oil feed Spring Bit (point chisel, flet chisel, sheet metal chiselA, rivet chisel, sheet metal chiselb) one each, Length (Stroke): 66mm, Body Weight (kg): 1.44, Air Consumption (L/min): 95, Working Pressure (MPa): 0.61, Air Outlet: 1 / 4PT(Rc) male / PT (R) male, Cape Chisel Dimension (mm x mm): 10.2x125, Caution: Do not use when air pressured is more than 0.61 MPa Please make sure to wear safety goggles during use
分類 剝離工具 > 氣鑿
空氣切片機
NITTO KOHKI
379.90 SGD
ADD TO CART
Accessories: Bend flat chisel bar (15x155): 1 air-hose Assy(with coupler 30PH):1 coupler 200-30SH:1 piece, Specification: Pneumatic fixing of tip and machine, TRUSCO Part Number: 116-6964, Overall Length (mm): 184 (Main body), Weight (kg): 1.7, Air Consumption (m3/min): 0.2, Working Pressure (MPa [kgf/cm2]): 0.59[6], No-load Blows Number (min-1): 4000
分類 剝離工具 > 風鎬
針束式氣動除鏽機
ESCO
4.67(3)
289.90 - 699.90 SGD
Working Pressure (MPa): 0.64
分類 剝離工具 > 空氣針頭定標器
縮放錘子
YOKOTA INDUSTRIAL
289.90 SGD
ADD TO CART
TRUSCO Part Number: 209-8024, Overall Length (mm): 520, Weight (kg): 2.45, Air Pressure (MPa): 0.6, Hose Mouthpiece Mounting Screw: 3/8Rc, Use Hose Diameter (mm): 12.7, Caution: This product is manufactured in Japanese standards. Please check the specification before you order.
分類 剝離工具 > 空壓衝擊錘
切屑焦化錘
FUJI INDUSTRIAL TECHNIQUE
5.00(1)
389.90 SGD
ADD TO CART
Overall Length (mm): 273, Weight (kg): 2.6, Hose Mouthpiece Mounting Screw: PT3/8, Hose Nominal Diameter (phi mm): 9.5, Blows (Hz): 50, Piston Diameter (phi mm): 20.0, Caution: This product is manufactured in Japanese standards. Please check the specification before you order.
分類 剝離工具 > 空壓衝擊錘
噴射虎(氣動高速多針夾)
NITTO KOHKI
4.67(3)
1,299.00 SGD
ADD TO CART
TRUSCO Part Number: 116-6778, Weight (kg): 3.5, Main Part Dimension (mm): 264x173, Air Consumption (m3/min): 0.35, Working Pressure (MPa [kgf/cm2]): 0.59[6], Standard Length of Needle (mm): 180, No-load Blows Number (min-1): 4000, Caution: This product is manufactured in Japanese standards. Please check the specification before you order.
分類 剝離工具 > 空中鑿子
NPK Chipper
Nippon Pneumatic Mfg
599.90 SGD
ADD TO CART
Overall Length (mm): 273, Weight (kg): 2.4, No-load Blows Number (min-1): 3200, Caution: This product is manufactured in Japanese standards. Please check the specification before you order.
分類 剝離工具 > 風鎬
氣動除鏽槍
KUKEN
3.00(1)
489.90 SGD
ADD TO CART
Accessories: 20PMx1 pieces coupling plug, TRUSCO Part Number: 364-0922, Overall Length (mm): (Without needle) 210, Weight (kg): (Without needle) 1.2, Hose Mouthpiece Mounting Screw: Rc1/4, Air Consumption (Nm3/min): 0.15, Number of Needles: 12, Needle Length (mm): phi3x125, Use Air Hose's Inner Diameter (mm): 6.5, Compressor (Kw): 2.2, Purpose: To remove slag after welding. Make scratches on concrete and rock. Rust and paint removal from iron plate. Sand removal from casting.
分類 剝離工具 > 空中鑿子
Autochsela
Nippon Pneumatic Mfg
749.90 SGD
ADD TO CART
TRUSCO Part Number: 331-7838, Overall Length (mm): 245, Weight (kg): 2, Working Pressure (MPa): 0.6, Air Consumption (m3/min): 0.16, Hose Mounting Nozzle: Rc1/4, No-load Blows Number (min-1): 1500, Caution: This product is manufactured in Japanese standards. Please check the specification before you order.
分類 剝離工具 > 氣鑿
新凱倫
Nippon Pneumatic Mfg
959.90 - 969.90 SGD
Stroke (mm): 23, Hose Inside-Diameter (phi mm): 9.5, Working Pressure (MPa): 0.6, Air Consumption (m3/min): 0.45, Hose Mounting Nozzle: Rc3/8, No-load Blows Number (min-1): 4000, Piston Diameter (phi mm): 25.4
分類 剝離工具 > 氣鑿
Flux hammer
Nippon Pneumatic Mfg
389.90 SGD
ADD TO CART
TRUSCO Part Number: 344-8738, Overall Length (mm): 200, Weight (kg): 0.88, Working Pressure (MPa): 0.6, Air Consumption (m3/min): 0.15, Hose Mounting Nozzle: Rc1/4, No-load Blows Number (min-1): 5000, Purpose: Welding steel removal, rust removal, paint removal, woodworking, aluminum scallops, stone sculpture and a wide range of work applications.
分類 剝離工具 > 空壓衝擊錘
氣動錘
SP AIR
4.00(1)
329.90 - 439.90 SGD
Specification: With air regulator, Overall Length (mm): 216, Weight (kg): 1.65, Working Pressure (MPa): 0.62, Air Consumption (m3/min): 0.3, Hose Mounting Nozzle: NPT1/4, No-load Blows Number (min-1): 3000, Exhaust Direction: Front, Purpose: For rust removal of muffler and pipes with each chisel, to cut work of body panel. For chipping operation of concrete, stone, and metal.
分類 剝離工具 > 空壓衝擊錘
空氣針頭定標器
TOKU PNEUMATIC
389.90 SGD
ADD TO CART
TRUSCO Part Number: 486-3470, Stroke (mm): 10, Overall Length (mm): 225, Weight (kg): 1.12, Hose Inside-Diameter (phi mm): 6, Air Consumption (m2/min): 0.25, No-load Blows Number (min-1): 12000, Piston Diameter (phi mm): phi20, 2015 Trusco Published Pages: 2 1744, Caution: This product is manufactured in Japanese standards. Please check the specification before you order.
分類 剝離工具 > 空氣針頭定標器
針倍線器
YoshidaTools
389.90 SGD
ADD TO CART
Overall Length (mm): 196, Maximum External Diameter (mm): 36, Recommended Hose Diameter (mm): 9.5, Blows (Hz): 90, Piston Diameter (phi mm): 20, Needle (mm): 3x180-12, Caution: This product is manufactured in Japanese standards. Please check the specification before you order.
分類 剝離工具 > 空氣針頭定標器

1 2 3 4 5 6