充電工具 本體

TRUSCO Part Number: 217-1490, Overall Length (mm): 215, Weight (ｋg): 2.1, Power: AC100V(50/60Hz), Power Consumption: 180W, Use Jaw: PRG540-46B, Caution: This product is manufactured in Japanese standards. Please check the specification before you order.

Accessories: Driver bit # 1 Phillips 45mm driver bit # 2 Phillips screwdriver 45mm bit # 2 Phillips 75mm, Specification: High-speed, low-speed, hand tighten function, TRUSCO Part Number: 422-9037, Overall Length (mm): 238, Weight (g): 400 (when battery is equipped), Voltage (V): 2.4, Revolution (min-1[r.p.m]): High speed 400 low speed 200 Two-speed gear, Screw Fastening Capacity: Wood screws, lauan (phi3.1 x 13mm) Aboutimately 300 pieces Wood screws, lauan (phi3.5 x 20mm) Aboutimately 100 pieces Small screw, iron (M5 x 8 mm) About 650 pieces, Drilling Capability: Metal and iron (phi 2 x 1 mm) About 50 holes Metal work, aluminituesum (phi2x2.5mm) About 70 holes, Dimensions (Length x Height x Width) (mm): 180 X 127 x 36 (at the time of pistol type), Battery: NiCd (EZ9021), Chuck: On...

Accessories: Nozzle, TRUSCO Part Number: 468-8864, Weight (ｋg): 1.2 (body only), Wind Velocity (m/s): [There nozzle] 14.4V (EZ9L45) when used: 0 over about 60,18V (EZ9L51) when used: 0 over about 70, Air Volume: [None nozzle] 14.4V (EZ9L45) when used: 0 over about 2.6m3 / sec, 18V (EZ9L51) when used: 0 over about 3.0m3 / sec, Main Part Dimensions (Length x Height x Width) (mm): 370x213x148, 370x213x148

Output: DC5V/1.5A, Input: DC18V, Caution: This product is manufactured in Japanese standards. Please check the specification before you order.

Mode: FM,AM,Bluetooth(R),AUX-IN, Caution: This product is manufactured in Japanese standards. Please check the specification before you order.

Cycle(Hz): 50/60, Voltage (V): DC14, Input Capacitance: 5.6W, Power Consumption (W): 12, Output: DC14V0.4A, Body: HRT-12A, Chucking Ability (mm): 2.35, Rated Usage Time (min): 10, Purpose: For engraving, precision polishing, glass work etc., Caution: *This product is manufactured in Japanese standards. Please check the specification before you order.

Output Voltage (V): DC18, Chucking Ability (mm): 0.3-3.2, Input Voltage (V): DC18, Output Current (mA): 750, Rated Time (minutes): 15, Power Supply Adapter: AC100V,50/60Hz, Purpose: Hobby , general sculpture , precision work , glass sculpture. Easy working with pen feeling., Caution: *This product is manufactured in Japanese standards. Please check the specification before you order.

Shaft Diameter (phi mm): 2.35, Purpose: Hobby , general sculpture , precision work , glass sculpture. Easy working with pen feeling., Caution: *This product is manufactured in Japanese standards. Please check the specification before you order.

Shaft Diameter (phi mm): 2.35, Purpose: Hobby , general sculpture , precision work , glass sculpture. Easy working with pen feeling., Caution: *This product is manufactured in Japanese standards. Please check the specification before you order.

TRUSCO Part Number: 828-5870, Caution: This product is manufactured in Japanese standards. Please check the specification before you order.

Purpose: Sweeping leaves etc., Sweeping leaves etc., Caution: *This product is manufactured in Japanese standards. Please check the specification before you order.

Caution: *You can receive 100V power supply via the power unit (controller), and the rotation speed can be controlled.

Caution: This product is manufactured in Japanese standards. Please check the specification before you order.

TRUSCO Part Number: 493-1866, 493-1866, 493-1866, 2015 Trusco Published Pages: 2 1488, 2 1488, 2 1488, Caution: * It is only the main body. (Battery / Charger Optional)

TRUSCO Part Number: 493-1751, 2015 Trusco Published Pages: 2 1472, Caution: This product is manufactured in Japanese standards. Please check the specification before you order., This product is manufactured in Japanese standards. Please check the specification before you order.

Accessories: Plastic case: EZ9514 , Weight (ｋg): 4, Main Part Dimension (mm): 70 x 348 x 256, Nominal Output (kN): 93.2(9.5tonf), Purpose: Crimping range 14, 22, 38, 60, 70, 80, 100, 150mm2. Bare crimp terminals for copper wire (JIS C 2805) and sleeve (JIS C 2806), Caution: If the temperature of the body is low (about 10 deg C or less), crimp speed and amount of work is decrease. (There is no problem to the crimp quality.) If body temperature is extremely low (0 deg C or less), you might not be able to crimp properly. In thi

ESCO Part Number: EA818EV, Caution: *This product is manufactured in Japanese standards. Please check the specification before you order.

ESCO Part Number: EA813CD-100, Caution: *This product is manufactured in Japanese standards. Please check the specification before you order.

ESCO Part Number: EA813RD-120B, Caution: *This product is manufactured in Japanese standards. Please check the specification before you order.

Accessories: (403) bristle brush 19.1mm, (421) polishing compound for, (429) felt made polishing wheel 25.4mmx2 (84922) silicon carbide point 3.2mm, (430) sanding band 6.4mm / particle size 60 (512) polishing finish use puff 23.8mm / granularity 320, (191) high-speed cutter 3.2mm (7144) diamond wheel point 2.4mm, (402) mandrel 3.2mm, docking station dedicated wrench, (414) felt made polishing wheel 12.7mmx2, polishing wheel 25.4 mm aluminum oxide point 9.5mm, (412) sanding disk 19.1mm / granularity 220x5 (438) sanding band 6.4mm / granularity 120, (106) ¥ gray ping cutter 1.6mm, tool Handbook (194) high-speed cutter 3.2mm, ( 401) mandrel 3.2mm, (481) collet 2.35 over 2.4mm, accessories case, TRUSCO Part Number: 407-5838, 407-5838, Weight (g): 290, 290, Power (V): Charger / 100 (50 / 60Hz),...

Accessories: Tube nozzle (EZ3781K7567), brush nozzle attachment (EZ3781K7617), concrete hole nozzle attachment (EZ3780K7587), Weight (g): 700, Air Capacity (m3/min): Strength / about 1.6, weak / about 0.9, Wind Velocity (m/s): Strength / about 25, weak / about 14, Continuous Opreration Time (min): N type for 12V (EZ9200S) Strong: about 30 minutes, and less than: about 68 minutes, H type for 12V (EZ9108S) Strong: about 20 minutes, and less than: about 45 minutes, R type for 10.8V (EZ9L31) Strong: about 38 minute-weak: about 85 minutes, Battery: N type for 12V (EZ9200S), H type for 12V (EZ9108S), R type for 10.8V (EZ9L31) battery is not included., Main Part Dimensions (Length x Height x Width) (mm): 310x174x85

Weight (ｋg): 2.8, Power (V): DC18, Revolution (min-1[r.p.m]): 1700, Blower Wind Speed (m/s): 52, Dimensions (Width x Depth x Height) (cm): 13x121x28, Charging Time (hours): 1, Battery Capacity (mAh): 1700, Caution: This product is manufactured in Japanese standards. Please check the specification before you order.

Accessories: Lithium battery, rapid charger, storage bag, Weight (ｋg): 1.7 (including battery), Rated Voltage (V): 18, 18, Dimensions (Length L x Width W x Height H) (mm): 990x160x275, 990x160x275, Air Capacity (m3/min): 2.6, 2.6, Battery: Lithium rechargeable battery, Battery Capacity (Ah): 1.5, 1.5, Handling Range: (Standard) parking about 10 cars min, Charging Time (min): 40, 40, Wind Speed (km/h): 192, 192, TKG Part Number (2015): 5-1105-0901

Shaft Diameter (phi mm): 2.35, Purpose: Hobby , general sculpture , precision work , glass sculpture. Easy working with pen feeling., Caution: *This product is manufactured in Japanese standards. Please check the specification before you order.

Cycle(Hz): 50/60, Input Capacitance: 12VA, Output: DC7.5V 800mA, Chucking Ability (mm): 0.3-3.2, Input Voltage (V): DC7.5, Rated Time (minutes): 10, Power Supply Adapter: AC100V, Purpose: Hobby , glass sculpture , engraving , name inserting , rust remover , dirt remover etc., Caution: *This product is manufactured in Japanese standards. Please check the specification before you order.

Voltage (V): DC4.8, Output Voltage (V): DC6, AC Power Adapter (V): 100(50/60Hz), Output Current (mA): 300, Power Consumption (VA): 4.5, Battery Capacity (Ah): 0.7, Motor Voltage (V): DC4.8, Maximum Tightening Torque (N･m[kgf･cm]): 3.7[38], Purpose: To assemble furniture etc. To the work of a dimly lit room light., Caution: *This product is manufactured in Japanese standards. Please check the specification before you order.