訂單總金額超過 * S$200* 免運費

焊接氣體軟管和調節器耦合器

排序:
共 311 條結果, 第 1 - 30 條
顯示: 30 60 90
視圖: 網格視圖 列表視圖
帶加熱器壓力調節器
CHIYODA SEIKI
439.90 SGD
ADD TO CART
Material: BODY: C3771B, DIAPHRAGM: CR, SHEET :C3604B, Connection Diameter: Inlet side of :W22 mountain (right) 14 bags per Nut gasket, EXIT SIDE :M12x1... phi 6 6 HOSE WITH FITTINGS * NEEDLE VALVE, Weight (kg): 2.06, Peak Flow Rate (L/min): 25, Cord Length (m): 2.0, Power Source (AC V): 100, Gas: Carbon dioxide as the primary, Valve-Inlet Pressure Meter (MPa): 0 - 25, Valve-Inlet Pressure (MPa): tless than 14.7 , Secondary Side Pressure Guage (MPa): 0 - 0.6, Adjustment Pressure (MPa): 0.1 - 0.3, Flowmeter (L/min): 2 - 25, Heater's storage capacity (W): 190, Purpose: Arc welding, beverages, food industry, casting industry, promotion of plant cultivation, industrial, etc., Arc welding, beverages, food industry, casting industry, promotion of plant cultivation, industrial, etc., Caution: Can...
分類 焊接氣體軟管和調節器耦合器 > 氣體調整器
氧氣用調整器 SS小型
YAMATO SANGYO
5.00(1)
199.90 SGD
Weight (kg): 1.1
分類 焊接氣體軟管和調節器耦合器 > 氣體調整器
氬氣體壓力調整器 高・可選
CHIYODA SEIKI
399.90 SGD
ADD TO CART
Specification: Brass, Weight (kg): 1.4, Peak Flow Rate (L/min): 100, Connection: Entrance: W22-14 right (standard) exit: M12x1.0 (phi6 hose fitting), Compatible Gas: Ar (argon gas), Valve-Inlet Pressure Meter (MPa): 0 - 25, Valve-Inlet Pressure (MPa): 14.7 below, Secondary Side Pressure Guage (MPa): 0 - 1, Adjustment Pressure (MPa): 0.1 - 0.6, Flowmeter (L/min): 41695
分類 焊接氣體軟管和調節器耦合器 > 氣體調整器
LPG軟管
TOGAWA RUBBER
3.25(4)
39.99 - 76.99 SGD
Color: Orange, Inner Diameter (phi mm): 9.5, Working Pressure (MPa): 2.0, Outer Diameter (phi mm): 16.5, Display: LMN, Reinforcing Layer: 2S, Approximate Mass (g/m): 190
分類 焊接氣體軟管和調節器耦合器 > 焊接氣體軟管
通用小型壓力調整器
YAMATO SANGYO
4.75(4)
199.90 SGD
ADD TO CART
Connection Diameter: Inner outlet: W22-14crest/ Outer outlet: 8phi hose opening, Weight (kg): 1.2, Model/Type: Kanto type (hexagon cap nut type), Gas: Oxygen, Primary-side Working Range (MPa): - 15, Secondary-side Working Range (MPa): 0.2 - 0.99, High Gauge Pressure (MPa): 25, Low Gauge Pressure (MPa): 2.5, Standard Flow rate (m3/h): 25(P1=2.1MPa, P2=0.8MPa)
分類 焊接氣體軟管和調節器耦合器 > 氣體調整器
LP調整器
CHIYODA SEIKI
229.90 SGD
ADD TO CART
Caution: Do not use below 5 degree C air temperature. Cannot be used in the removed fluid from siphon tank etc., Material: main unit: C3771B Diaphragm: CR Seat: C3604B, Shape: Entrance: For W22.5 mountain 14 (the left) LP exit: M16-P1.5 (the left) 3/8 (phi9) hose mouth, Weight (kg): 0.75, Gas: Propane, Standard Flow rate (m3/h): 4 (normal condition), Secondary Side Pressure Guage (MPa): 0 To 0.25 (No primary side pressure gauge), Adjustment Pressure (MPa): 0.02 - 0.15, Inlet Pressure (MPa): less than 2.0
分類 焊接氣體軟管和調節器耦合器 > 氣體調整器
通用緊湊型壓力調節器
YAMATO SANGYO
5.00(2)
219.90 SGD
ADD TO CART
Specification: With valve, TRUSCO Part Number: 126-7647, Weight (kg): 1.3, Material (Body): C3771B, Connection: Entrance: W22-14 (right) hexagon cap nut (P) Exit: phi8 hose opening (M16x1.5 (right) hexagon cap nut), Gas: Nitrogen, Primary-side Working Range (MPa): 2 - 14.7, Secondary-side Working Range (MPa): 0.2 - 0.99, Standard Flow rate (m3/h): 45, Valve-Inlet Pressure Meter (MPa): 25, Secondary Side Pressure Guage (MPa): 1.6, Maximum Flow Rate (m3/h): 55, Materials (Valve): PCTFE, Material (diaphragm): CR
分類 焊接氣體軟管和調節器耦合器 > 氣體調整器
氬弧焊調整器
SAKAGUCHI
149.90 SGD
Weight (kg): 1.2, Dimensions (Width W x Height H) (mm): 160x180, Secondary Side Pressure (MPa): 0.3
分類 焊接氣體軟管和調節器耦合器 > 氣體調整器
焊接氣體用雙並列管
TOGAWA RUBBER
5.00(3)
76.99 - 249.90 SGD
Color: Oxygen hose: Blue Acetylene hose: Red, Inner Diameter (phi mm): Oxygen hose: 8.0 Acetylene hose: 9.5, Working Pressure (MPa): Oxygen hose: 2.0 Acetylene hose: 0.15, Outer Diameter (phi mm): Oxygen hose: 14.4 Acetylene hose: 15.9, Display: OXY+ACE, Reinforcing Layer: Oxygen hose: 2S Acetylene hose: 2S, Approximate Mass (g/m): 325
分類 焊接氣體軟管和調節器耦合器 > 焊接氣體軟管
YAMATO Quick Mag回火防止器
YAMATO SANGYO
1.00(1)
139.90 SGD
Specification: (How to Reset)QUICK return without removing the body, Connection Diameter: 8A, Weight (kg): 0.35, Material (Body): C3604B
分類 焊接氣體軟管和調節器耦合器 > 閃回防設備
快速接頭(套管型)
KOIKE SANSO KOGYO
4.75(8)
19.99 - 24.99 SGD
Type: One-touch type
分類 焊接氣體軟管和調節器耦合器 > 焊接連接器 > Socket
壓力計
SAKAGUCHI
5.00(5)
13.99 SGD
Screw Diameter: PF1/4
分類 焊接氣體軟管和調節器耦合器 > 零件,選項
LP工業用氣體調整器
SAKAGUCHI
4.71(7)
129.90 SGD
ADD TO CART
Shape: Inlet screw dimensions: W22.5x14 (left) male screw Outlet screw dimensions: M16x1.5 (left) male screw (9phi) hose opening, Weight (kg): 1.2, Gas: Propane, Low Gauge Pressure (MPa): 0.2, Standard Flow Rate (Nm3/h): 6
分類 焊接氣體軟管和調節器耦合器 > 氣體調整器
氧氣調整器(關西式)
SAKAGUCHI
4.44(9)
129.90 SGD
Weight (kg): 1.5, Dimensions (Width W x Height H) (mm): 185x155, Standard Flow Rate: 25NM3/h
分類 焊接氣體軟管和調節器耦合器 > 氣體調整器
通用緊湊型壓力調節器
YAMATO SANGYO
3.50(2)
199.90 SGD
ADD TO CART
Connection Diameter: Inner outlet: W23-14crest/ Outer outlet: 8phi hose opening, Weight (kg): 1.2, Model/Type: Kansai type (thumb screw type), Gas: Oxygen, Primary-side Working Range (MPa): - 15, Secondary-side Working Range (MPa): 0.2 - 0.99, High Gauge Pressure (MPa): 25, Low Gauge Pressure (MPa): 2.5, Standard Flow rate (m3/h): 25(P1=2.1MPa, P2=0.8MPa)
分類 焊接氣體軟管和調節器耦合器 > 氣體調整器
OK軟管
YAMATO SANGYO
3.50(4)
349.90 - 599.90 SGD
Accessories: HOSE INSTALLED (SA-1/2, PA-1/2), ACCESSORIES (SR-1/2, PT-1/2), Type: Cock type, Hose Diameter (phi mm): 5, Assured Withstand Pressure (MPa): 1.5, Coupler Type: Koike, Purpose: For oxygen and acetylene, For oxygen and acetylene
分類 焊接氣體軟管和調節器耦合器 > 焊接氣體軟管
氧氣管
TOGAWA RUBBER
4.50(4)
48.99 - 149.90 SGD
Color: Blue, Display: OXY, Reinforcing Layer: 2S, Approximate Mass (g/m): 170
分類 焊接氣體軟管和調節器耦合器 > 焊接氣體軟管
Mini coupler plug PF type (for blow pipe installation)
NITTO KOHKI
6.29 - 6.49 SGD
分類 焊接氣體軟管和調節器耦合器 > 焊接連接器 > 插頭
Mini coupler plug PFB type (For reverse flow prevention type for blow pipe installation)
NITTO KOHKI
13.99 - 14.99 SGD
Specification: With backflow valve for air pipe, Material (Body): Brass, Socket or Plug: Plug, Material (Seal): Nitrile rubber, Maximum Working Pressure (MPa [kgf/cm2]): 0.7[7], Dimensions Lp (mm): 48.5
分類 焊接氣體軟管和調節器耦合器 > 焊接連接器 > 插頭
Minicock socket SM type (for collective piping)
NITTO KOHKI
25.99 SGD
Material (Seal): Nitrile rubber, Dimensions A (mm): 13, Maximum Working Pressure (MPa [kgf/cm2]): 0.7[7], Pressure Resistance (MPa [kgf/cm2]): 1.0[10]
分類 焊接氣體軟管和調節器耦合器 > 焊接連接器 > Socket
阿波羅公雞(插座)
KOIKE SANSO KOGYO
4.40(5)
25.99 - 27.99 SGD
Type: One-touch type, Dimension H (mm): 19, Dimension F (mm): 14, Dimensions D (mm): M16x1.5, Purpose: For regulator direct coupling, For regulator direct coupling
分類 焊接氣體軟管和調節器耦合器 > 焊接連接器 > Socket
二氧化碳氣體調整器(自然汽化式無加熱器型)
SAKAGUCHI
4.29(7)
289.90 SGD
ADD TO CART
Connection Diameter: ENTRANCE SIDE:W22-14 ridge (right) bag nut EXIT SIDE : M 12 X 1.0 (RIGHT) MALE SCREW, Weight (kg): 2.7, Operating Pressure Range (MPa): - 0.3, Low Gauge Pressure (MPa): 0.5, Standard Flow Rate (L/min): 25
分類 焊接氣體軟管和調節器耦合器 > 氣體調整器
雙軟管
TOGAWA RUBBER
5.00(5)
69.99 - 229.90 SGD
Color: Blue + red, Inner Diameter (phi mm): (Oxygen hose)5.0/(acetylene hose)5.0, Working Pressure (MPa): Oxygen hose /2.0 Acetylene hose /0.15, Outer Diameter (phi mm): Oxygen hose /11.8 Acetylene hose /11.5, Material (Surface/Back/Partition/Reinforcement): 2S
分類 焊接氣體軟管和調節器耦合器 > 焊接氣體軟管
迷你 回火防止器(Q接頭型)
CHIYODA SEIKI
48.99 SGD
2014 TRUSCO Published Page: 2-2567, Purpose: Backflow and backfire prevention. Countermeasure of rubber hose burst accident., Backflow and backfire prevention. Countermeasure of rubber hose burst accident., Caution: It doesn't blosk gas nor oxygen. Use our product"SAVE POINT S type" dry safety device(adjuster mounting type) together., It doesn't blosk gas nor oxygen. Use our product"SAVE POINT S type" dry safety device(adjuster mounting type) together.
分類 焊接氣體軟管和調節器耦合器 > 閃回防設備
金屬溫度感知遮斷閥
KOIKE SANSO KOGYO
5.00(1)
76.99 SGD
Overall Length (mm): 72, Weight (g): 210, Functions: Reset relay function: display type (red), pin lock, one touch system Abnormal temperature shut-off feature: gas shut-off at 95degreeC, Caution: Reset ring part colors change depending on its manufacturing year, from blue, green, white to red., Reset ring part colors change depending on its manufacturing year, from blue, green, white to red.
分類 焊接氣體軟管和調節器耦合器 > 閃回防設備
乙炔減壓器框架
SAKAGUCHI
5.00(1)
12.99 SGD
ADD TO CART
分類 焊接氣體軟管和調節器耦合器 > 零件,選項
Chiyokook
CHIYODA SEIKI
5.00(1)
6.49 SGD
ADD TO CART
Application: For oxygen and mild hose, TRUSCO Part Number: 354-4125, Material: Steel Body Packing/nitrile rubber Spring/stainless steel, Fluid: Oxygen, Type: Mild hose plug, Working Pressure (MPa): Less than 1, Allowable Temperature (degreeC): -10 - +60, Burst Pressure (MPa): 3 ( minimum pressure value which can destroy the whole main body), Connection Shape: Hose: 5 mm
分類 焊接氣體軟管和調節器耦合器 > 焊接連接器 > 插頭
OK公雞
YAMATO SANGYO
8.69 - 9.29 SGD
分類 焊接氣體軟管和調節器耦合器 > 焊接連接器 > 插頭
快速接頭(管塞)
KOIKE SANSO KOGYO
5.00(5)
6.39 - 14.99 SGD
分類 焊接氣體軟管和調節器耦合器 > 焊接連接器 > 插頭
Apollo掌上型軟管套裝
KOIKE SANSO KOGYO
249.90 - 439.90 SGD
Specification: F type (Apollo band system), Inner Diameter (phi mm): 5, Outer Diameter (phi mm): 11.2, Normal Opreration Pressure: Oxygen: 1.5 or less (maximum) flammable gas: 0.2 or less (maximum), Caution: Read instruction manual before use. Do not use for other tahn gas fusing work., Read instruction manual before use. Do not use for other tahn gas fusing work.
分類 焊接氣體軟管和調節器耦合器 > 焊接氣體軟管

1 2 3 4 5 6 7 8 9 10 ...11