Engine oil change
On 2019-08-02 15:07:47
Since it seems to be almost clear, drain exchange is not done after obtaining this.
I do not want to take out mississi oil from Missyu Pampa from the drain pan,
On 2018-10-27 14:50:18
He sucked up very well. Improvement was that the clip to be sandwiched between the battery terminal was more durable, (clip twisted and fixed)
Car oil change
On 2018-08-16 21:19:18
It was troublesome to jack up every moment until I did not change the filter, so I bought it to replace the car oil with a top cut, but Suzuki's KEI did not get out well.
When replacing the oil of a car
On 2018-06-08 16:12:30
I think that operability / performance is superior to COSPA, but I feel that it is more convenient for people who do not power 12V but operate to operate at 100V for home use.
Drum circulation or replacement during oil change
On 2017-11-14 16:56:28
It may be good if WS is attached. Inconvenience with removing the terminal
On 2017-09-26 23:23:44
I think that the pull-up capability will be such, but the meaning of impossible for diesel is unknown.
Work to remove the differential oil
On 2017-04-05 17:33:11
I tried using this tool by changing the oil of the vehicle without the drain bolt pulling the differential oil. I could use it without any problem, it was saved.
Since oil change, since the bolt of the drain cock is out of specification as a French car, it pulled out from the top.
On 2017-04-02 15:35:22
I did not come out at all at first, I was struggling, I molded the suction side straight and finally got out. I am looking for pipes of aluminum and brass from your company's catalog, thinking to make the pipe on the suction side a little harder or if there is an inlet for aluminum pipes etc.
On 2016-09-26 17:40:49
FORD 1995 I used it for ATF exchange of Econoline 1995. There is no drain in this car, mission pan, and the filter and gasket are fully exchanged. It will be a work to get under the car and remove the bread. I tried exchanging them once (5.8 liters) twice, 3 degree ,,,, (money and work) hard. So, finding goods as to whether OIL can be sucked from above somehow for 2 months. Purchase this product manually with your brand. We sucked from the top without permission. 1.5 m to the mission OIL side. Extend the hose with the items on hand. Oh no, you can suck it off! (3.5 L). After all, do not use a manual pump. (Among them it can be used for something?) It is not a disadvantage, but the hose φ on the suction side is thin? White smoke from the motor (slowly turning ON and OFF repeatedly while using the motor while cooling it). Always specify the hose band at the main unit connection (otherwise OIL will be scattered inside the main unit). That is why knocking has decreased and it is a great success. (FARD revived!) Look at the situation, I will try hard on my next exchange. It is also a drawback to only put this on a repair shop. However, please do not mind the ATF sampling. If you do not do it, the scale peels off, somewhere is clogged up and it becomes AT exchange AT the worst. It is not bad.
On 2015-10-17 23:24:52
I will not review it unless I have a good deal, but I wonder if this item can be honestly recommended. Once I exchanged it due to oil leakage from the main unit, oil leaked from the main unit from the main unit though it was exchanged. After draining the oil, waste oil will come out from the switch part, air hole part, after turning from a few seconds and draining the waste oil remaining in the hose and then removing the hose and cap. In subsequent use, it leaks from the switch part even during operation, it is not specialized in maintenance, so we only replace the oil about 10 units per month, but we have dirtied your car. As expected two of them are the same symptoms and it can only be said as defect of goods. Even though it takes time now, we are exchanging the oil with the bottom.