Creating a gun brush adapter
On 2019-10-19 20:41:29
For shotgun cleaning brushes and oil wipes, M7 × P1.00 threads are generally used in Japan, and in the case of a three-joint cleaning rod made of aluminum, etc. M6 x 1.00 is used for the joint screw, and the above-mentioned cleaning brush is attached by attaching a conversion adapter of M7 x P1.00 to this tip.
On the other hand, 5 / 16-27 threads are often used for shotgun cleaning brushes in Europe and the United States and China, but this is quite similar to M8 × 1.00 fine screws. Therefore, if you use this M6 brass spacer and recut the thread on the female thread side with a tap of M8 x 1.00, you can attach a Western cleaning brush to a domestic spliced cleaning rod. There are cleaning brushes that use special shapes and materials overseas, which is useful if you want to use them in Japan.
Using a drilling machine, the tap will be raised after re-opening the pilot hole on the female screw side with a 6.8mm-7mm drill, but it is also good that cutting is very easy because the material is brass. Originally, it is better to use 5 / 16-27 mountain taps, but even M8 x 1.00 has no practical problem.
If you want to use a single domestic cleaning rod, you can recut the male screw on the brush side with an M7 × 1.00 die, but the center of the brush shaft is easily misaligned. I do not recommend it too much.
On 2019-05-24 20:20:38
I was saved with something that looks beautiful. I feel that it was good even if it was one unit
As a pillar of a bar stand
On 2019-03-03 11:42:38
The screws are precisely cut and the hexagonal faces fit perfectly when the two are put together.
Height adjustment of bike navigation
On 2019-02-03 01:09:38
The navigation of the bike interferes with the screen and the meter, so this part adjusts the position. Good parts that are clean and do not rust.
On 2019-01-16 16:22:45
Purchase for electronic equipment parts assembly test.
Especially satisfactory without problems.
As wall spacer TV spacer
On 2019-01-05 15:50:21
I bought it because I wanted to float several centimeters because the new TV did not attach to the wall-pocket TV stand I purchased (there was a protrusion on the back and it was caught).
There is no handling in a nearby electric shop etc., I found Monotaro in the net search.
As a result, it fitted perfectly like the attached parts and I was able to set up the TV safely. I am very satisfied! Thank you very much.
On 2018-06-20 14:44:42
I am using it for repairing the product, it can be used without problems.
For substrate fixing
On 2017-05-16 08:10:07
I think that it is perfect size and enough appearance and price · cheap so I will use it for another opportunity
For substrate fixing
On 2017-01-26 15:12:41
I think that I want to use it because the use feeling and the appearance were perfectly fine without any problems.
Machining of machinery
On 2016-08-12 14:27:09
It is attractive that you can order the parts you want at a lower price