As an automobile parts manufacturing part
On 2018-01-05 09:04:23
There is not a problem. It is still better if there is a setting of the thickness of the nut. In actual use, I used it after thinly slicing with a lathe in half.
I use it to tighten the tool I have
On 2017-10-25 16:29:09
I have not used it yet for work. I was satisfied because the tool was firmly fixed
Set screw for grass cutter chip saw
On 2016-07-24 19:48:49
It is batch size. It is cheap. I distributed the rest to the neighbors.
Fixing one side of turnbuckle for attachment of agricultural equipment attachment
On 2016-01-31 15:53:21
To fix the turn buckle so far fixed only to the right screw side, the left screw side is free, the left screw side rotates, the distance between the center of the left and right metal is displaced, and the size has to be decided each time it is attached It was struggling. I applied paint on the tan buckle on the left screw but disappeared at any moment, the position of the screw communication became unclear and there was no effect. I fixed the left screw side with the left screw nut that I had sent this time, and in the future I do not need the size determination one by one, big help is given. PS: To insert a nut it is necessary to remove the stopper in the bolt.
Used for attaching a grinder stone
On 2014-11-13 18:03:25
It is a special use of left screw, it seems that quantity used is extremely low. Would not it be better to be able to purchase the packing quantity of sales from even one.