On 2019-06-19 09:30:21
The products are satisfactory because they are quick from order to arrival, very inexpensive, and the products have sufficient performance requirements.
Hook suspension part of self-made cabin of bulldozer
On 2018-10-24 17:51:59
The size of the hole The thickness is perfect. I cut one side to R and welded it to the four corners of the cabin. Even if lifting it was no problem at all. It's about to be too strong.
Light rail retainer
On 2018-06-09 07:26:42
There is no problem in quality at all. The Osaka soul series is saved with low price and high quality. I already purchased repeat.
On 2016-11-23 18:14:16
I was able to use it as desired. The price was also right place.
On 2016-02-29 16:22:30
It adapts to the size of our own 20 ton hydraulic press cylinder ram part, it is perfectly fixed and worked with security.
On 2015-10-04 22:33:22
There are no particular improvements.
Press fitting of RMX-SJ13 in crankcase
On 2014-07-16 16:59:23
52 angles × 2, 62 angles × 2 (One piece is cut off 20 mm in angle), 68 angle × 1 and M 16 × 130 mm bolt, M 20 nut × 5 as a spacer. Now all bearings in the crankcase can be pressed in.