On 2019-08-12 19:34:05
As expected, the accuracy of the straight collet at Nikken Sakusho was outstanding.
On 2019-01-10 15:25:46
In milling, we bought it to use an odd diameter end mill. Because I used it in a small milling cutter, I was worried about how much accuracy is required but I bought this item after considering the price. I can not judge the quality of accuracy, but it is enough for our use.
On 2018-11-28 15:16:32
When using a collet chuck with a narrow body with a narrow processing range it is useful because you can grasp a 16 mm shank diameter knife.
Work holding with lathe
On 2016-11-27 14:35:19
Although it seemed not to be used for lathes, it can be used without problem for work holding with a lathe. I think that it will be saved if it can be bought cheaply in a set because it is a thing with several pieces of size.
Jig for NC milling
On 2016-10-14 16:12:05
It is stable use, accuracy is no problem.
Plastic cutting processing
On 2016-05-28 16:16:25
Nikkyo is easy to use.
On 2016-02-25 18:10:58
Although the finish of the product is good, it is difficult to pull out the nail when it is pulled out from the holder.
On 2015-01-14 23:18:56
It can be used with confidence.
On 2014-12-15 20:14:47
Purchased to grasp the workpiece rather than the end mill with 3 chucks. Although it is divided into three in the image, in reality it is not usable in six divided from both sides ... I hope things that are not common images if possible.
On 2014-11-05 09:34:45
There was MADE IN KOREA written in the product. It should be clearly stated in the explanation. It seems I was deceived, I do not feel like it.