Pneumatic Tool Accessories
Pneumatic tool accessories are parts related to “pneumatic tools” that are driven using the force of compressed air returning. This category includes needles for air chisel used for peeling operations, air sander replacement pads and polishing paper used for polishing operations, and sponge buffs for air polishers. Also included in the pneumatic tool accessories are connecting hoses such as impact wrenches and grinders that protect pneumatic tool connections that generate vibration from vibration.
Other Related Pages
-
- FUJI INDUSTRIAL TECHNIQUE Drill chuck for FRD-6PH-3 (8)Air Consumption (m3/min) 0.6 Chucking Size (mm) 8 Overall Length (mm) 45.2 Suitable Model FRD-6PH-3-8 Trusco Part No. 798-4235from S$129.90Min. 7 days
-
- MonotaRO Needle General PurposeDue to the use of special steel, it is tough and has a long life. A highly versatile needle that can be used by various manufacturers. Needle for pneumatic and electric chisel. * Needle for pneumatic / electric chisel. Never use it for any other purpose.Length (mm) 180
- MASTER AIR Flat eraser padA flat eraser pad used for low-speed drills.Thickness (mm) 15 Allowable Rotation Speed (min -1 [rpm]) 4000 Screw Dimensions 5/16-24 Diameter (Φmm) 88 RoHS directive (corresponding to 10 substances) Correspondence Suitable Model MPT38660 Specification With 6Φ adapter
-
- TOKU PNEUMATIC Air Hammer Lytopic Hammer (Air type)For concrete chipping work in civil engineering, construction, and building structures. For deburring work.
- FUJI INDUSTRIAL TECHNIQUE FCH-20 type chiselCutting Edge Shape Flat type
- MonotaRO Parts for Air Orbital Sander* Do not use for anything other than its intended purpose.Pad Dimensions (mm) 73×98 Suitable Model M12 Monotaro Air Orbital Thunder
-
- ESCO Sandblast Exclusive SandAbrasive Grain Size 60 Material Aluminum system Esco Part No. EA127B-15 Suitable for For EA127B, BB, BK
-
- MASTER AIR Gear type eraser padEfficiently scrapes stickers and lines with many corners !! It can be used with low-speed drills, etc.Diameter (Φmm) 100 Thickness (mm) 27 Allowable Rotation Speed (min -1 [rpm]) 3500 Screw Dimensions 5/16-24 RoHS directive (corresponding to 10 substances) Correspondence Suitable Model MPT38660 Specification With 6Φ adapter
-
-
-
-
-
- UHT (Ushio) Cup GrindStone (For 093/123)For grindingWheel Diameter (Φmm) 30 Mounting Dimensions M7×P0.75
- AIRREX (Anest Iwata) Socket set"AIRREX" is Anest Iwata's DIY brand. It is a set of sockets that are ideal for impact wrenches. Tightening and loosening bolts and nuts.
-
-
-
- TRUSCO Bimetal air saw bladeUses a bimetal saw blade that is hard to break, is strong against impact, and has good sharpness. It can be cut even in a small place. For cutting thin iron plates, thin stainless steel plates, aluminum, plastics, bumper materials, FRP, etc. For finishing woodworking and resin products. For debur... Read MoreMass (g) 48.2 Material Bimetal high speed 2018 Trusco page 5 0866from S$48.99Min. 2 days
- LOBSTER (LOBTEX) Shrimp Riveter M NosepieceTip parts for LOBTEX S-type / M-type air riveters and hand riveters * Install a size that matches the diameter of the rivet flange you are using. If rivets of different sizes are used, rivets cannot be performed normally.
- MonotaRO Flat chisel 20mm width for air opener M270FTip tool for air upper M270F. Tip tool for air upper M270F * Do not use for any other purpose.Dimension (mm) 12.7X175 Mass (g) 192 Suitable for For air archer M270F Material SCM440 Shank Shape Squarefrom S$24.99Min. 2 days
- MonotaRO Air chipper 50 mm wide Flat chisel for M270FTip tool for air upper M270F. Tip tool for air upper M270F * Do not use for any other purpose.Dimension (mm) 12.7X175 Mass (g) 265 Suitable for For air archer M270F Material SCM440 Shank Shape Squarefrom S$31.99Min. 2 days
-
-
- AIRREX (Anest Iwata) Flat chiselSpecification Hex axis only Suitable for TLX9803、TL9834
- MonotaRO Nose cap for Air Finish NeiraDedicated replacement part for Monotaro Air Finish Neira. * Do not use for any purpose other than its intended purpose. * Due to model changes, the color will change from red to white.Suitable for MF35、MF57
-
- ESCO # 120 / 1kgx2 sandblast sandEsco Part No. EA127B-17 Material Aluminum system Suitable for For EA127B, BB, BKfrom S$58.99Min. 2 days
- Air Wave (Wa Corp.) Trametme changer (tractor claw replacement air tool)Only the inner tension bar under the grip rotates, so even if the inner tension bar rotates at high speed, you can rest assured that you will not get burned or injured. Tractor claws and halo claws can be replaced using the air impact wrench used to replace tires. Even rusted nuts can be attached... Read MoreWithstand load N ・ m (kgf ・ m) (Horizontal) 592 Angle of Flexible Head (°) 40 RoHS directive (corresponding to 10 substances) Correspondence Material (Socket) Cr-Mo (chromium molybdenum steel)
- UHT (Ushio) Air HoseUshio Hand Tools / Micro Spindle PartsLength (m) 1.5 Specification With band Mass (g) 36 Trusco Part No. 143-3504
-
- Compact Tool Paper dust bagA disposable dust suction bag for dust suction sanders.Trusco Part No. 366-3906 Mass (g) 300
- Compact Tool Duct hoseThe low center of gravity design provides a good sense of stability and excellent usability. Duct hose for dust suction sander Φ19. Putty polishing, woodworking polishing, FRP polishing.Dimension (mm) - Hose Length (mm) 1250 Mass (g) 130 Trusco Part No. 366-3914
- UHT (Ushio) New Soft Wrap (for 093/123)For polishingSpecification 1 rubber pad Diameter (Φmm) 30 Mass (g) 45 Mounting Dimensions M7×P0.75
