Power Supply
Other Related Pages
PROXXON Power transformer MT58RoHS directive (corresponding to 10 substances) Correspondence- Minitor DC power pack (2-station type)A high-performance power pack equipped with new functions that maximize the capabilities of the handpiece. In Ver.2 handpiece, the type is identified just by inserting the handpiece, and in addition to speed display, optimum torque control is performed.Outlet [Tool] 2 places Output Voltage (V) DC1～30 Trusco Part No. 491-7111 Input Voltage (V) AC100 Rated Input (VA) 60 Mass (kg) 2.5 Power Cable (m) 2from S$859.90Min. 2 days
- HIOS CL / SS / a driver dedicated power supplyThis is a dedicated power supply for CL / SS / a series drivers. (CLT-45 cannot be CL-7000, 9000, SS-7000, α-6500)Trusco Part No. 781-0598 Mass (g) 330 Width (mm) 71.5 Input power (V) AC100～240 Power Consumption (W) 48 Height (mm) 42.6 Power Cable (m) 1.8 (Inlet cord with ground) Length (mm) 146 Secondary Output Hi / Lo two-stage switchingfrom S$199.90Min. 2 days
- HIOS Brushed Electric ScrewdriverMulti-input type (supports up to AC100-240V). It supports a wide range of input voltages and can provide a stable power supply. Its compact size allows it to be installed anywhere. * Cannot be combined with CL-9000.Power Cable (m) 1.8 (Inlet cord with ground) Trusco Part No. 344-4490 Mass (g) 830 Outer Dimensions, Width W x Depth D x Height H (mm) 88×210×52 Primary Side Input Voltage AC100V～AC240±5%(47/63Hz) Secondary Output HI / LOW two-stage switching Specification Multi-input typefrom S$299.90Min. 2 days
- HIOS Power supply for brushless screwdriverBrushless driver BL, BLG series dedicated power supply. (BL-7000 is not possible) Secondary output: Hi / Lo 2-step switching (some drivers cannot be switched)Height (mm) 42.6 Trusco Part No. 781-3163 Power Consumption (W) 40 Width (mm) 71.5 Cable Length (m) 1.8 (Inlet cord with ground) Mass (g) 320 Length (mm) 146 Recharging Input Voltage (V) AC100～240from S$179.90Min. 2 days
- HIOS Power supply for electric screwdriver (one power supply)Brushless screwdriver (BL series) 1 unit power supply.Input Power AC100～240V Secondary Output Hi / Lo two-stage switching Cable Length (m) 1.8 (Inlet code)from S$269.90Min. 2 days
- Leutor (NIHON SEIMITSU KIKAI KOSAKU) Mini Eight Power UnitA compact, lightweight, high-performance, high-end power unit developed in anticipation of the future. Compact size with an emphasis on beautiful design and functionality. Equipped with a high-performance microcomputer Equipped with 2-station feedback function With soft start and quick stop funct... Read MoreFuse Capacity (A) 2 Rated input AC100V 50/60Hz 30Wfrom S$749.90Min. 2 days
- Leutor (NIHON SEIMITSU KIKAI KOSAKU) Power unitForward rotation and reverse rotation are possible. Built-in circuit breaker to protect the motor from burning. A foot switch (optional) can be used.Fuse Capacity (A) 1 Rated Input (VA) 30 Power Supply AC100V 50/60Hzfrom S$379.90Min. 4 days
- Nidec Techno Motor High frequency inverter power supplyLow noise and low vibration. It consumes less power and is economical. Equipped with various protection functions, it is a safe inverter power supply. Due to the dustproof structure, it is trouble-free.Cable Length (m) 3 Output Voltage (V) 3-phase AC 200-240V input side voltage 3-phase AC 200-240V Output Frequency (Hz) 400Hz Input Frequency (Hz) 50Hz 60Hz Mass (kg) 6.5 Specification Power ON / OFF switch inverter method Sine wave approximation PWM method Cooling Method cooling fan Allowable Voltage Fluctuation ± 10% or lessfrom S$1,999.00Min. 2 days
- Leutor (NIHON SEIMITSU KIKAI KOSAKU) GOLD2 power unitWith a carrying handle that is convenient to carry. Forward / reverse rotation is possible. A foot switch (optional) can be used.Rated Input (VA) 35 Fuse Capacity (A) 1.5 Power Supply AC100V 50/60Hzfrom S$389.90Min. 4 days
- Nidec Techno Motor High frequency inverter power supplyIt is now possible to use two grinders at the same time with one inverter. Comes with a soft start function. With an instant stop (brake) function.Mass (kg) 12 Output Voltage (V) 3-phase AC 200-240V input side voltage 3-phase AC 200-240V Output Frequency (Hz) 400Hz Dimensions, Width W x Depth D x Height H (mm) 400×180×222 Input Frequency (Hz) 50Hz 60Hz Type of Control Sine wave PWM method inverter method Sine wave approximation PWM method Cooling Method cooling fan Allowable Voltage Fluctuation ± 10% or lessfrom S$3,599.00Min. 32 days
- FUJI GRINDING WHEEL MFG High Frequency Inverter Power Supply (250Hz)It is resistant to overload due to the increased inverter rating. Visibility has been improved with an illuminated switch. Dustproofness has been improved by the dustproof filter device. (Filter replaceable) Two of our high frequency grinders can be used at the same time. Protect the outlet with ... Read MorePower Supply Capacity (kVA) (Input side) 17.0 Output Capacity (kVA) (Output side) 13.1 Mass (kg) 14.5 output side voltage 200V (corresponds to input voltage) Trusco Part No. 207-1527 Output Frequency (Hz) 250 Rated Current (A) 33.0 Input Frequency (Hz) 50/60 input side voltage Three-phase 200Vfrom S$5,999.00Min. 32 days
- VESSEL Adapter for VSC-02For screw counter No. VSC-02 [Image notes] * For VSC-02.Input / Output AC100-240V/DC24V Suitable for VSC-02 Main Unit Dimensions, Length (mm) 70from S$67.99Min. 6 days
- Nidec Techno Motor 400Hz high frequency inverter power supplyLow noise and low vibration --- Extremely low noise and low vibration due to the static power supply. Economical-Economical with low power consumption. Dust-proof structure-The inverter is closed as a measure against dust caused by grinding work. Stable output voltage-The output voltage is detect... Read Moreoutput side voltage 3-phase AC + 200-240V input side voltage 3-phase AC + 200-240V Mass (kg) 6.0 Protection Indoor closed type Frequency (Hz) Input side: 50/60, output side: 400 Allowable Voltage Fluctuation Input side: ± 10% or less Frequency Tolerance Input side: ± 5% or less inverter method Sine wave approximation PWM method Cooling Method cooling fanfrom S$1,999.00Min. 5 days
- FUJI GRINDING WHEEL MFG High Frequency Inverter Power Supply (120-250Hz)It is resistant to overload due to the increased inverter rating. Visibility has been improved with an illuminated switch. Dustproofness has been improved by the dustproof filter device. (Filter replaceable) This type is exclusively for one of our high frequency grinders.Power Supply Capacity (kVA) (Input side) 9.0 Output Capacity (kVA) (Output side) 7.0 Output Frequency (Hz) 120～250 Rated Current (A) 17.5 output side voltage 200V (corresponds to input voltage) Trusco Part No. 207-1528 Input Frequency (Hz) 50/60 Mass (kg) 8 input side voltage Three-phase 200Vfrom S$2,399.00Min. 32 days
- Leutor (NIHON SEIMITSU KIKAI KOSAKU) Mini light power unitRated Input (W) 10 Mass (g) 850 Dimensions, Width W x Length L x Height H (mm) 85×125×70 Power Input (V) AC100(50/60Hz)from S$199.90Min. 4 days
- Nidec Techno Motor 250Hz high frequency inverter power supplyLow noise and low vibration --- Extremely low noise and low vibration due to the static power supply. Economical-Economical with low power consumption. Dust-proof structure-The inverter is closed as a measure against dust caused by grinding work. Stable output voltage-The output voltage is detect... Read Moreoutput side voltage 3-phase AC + 200-240V input side voltage 3-phase AC + 200-240V Mass (kg) 5.5 Protection Indoor closed type Power Supply Capacity (kVA) Input side: 5.5 (20A) Frequency (Hz) Input side: 50/60, output side: 250 Allowable Voltage Fluctuation Input side: ± 10% or less Frequency Tolerance Input side: ± 5% or less Output Capacity (kVA) Output side: 4.2 inverter method Sine wave approximation PWM method Cooling Method cooling fanfrom S$2,299.00Min. 5 days
- FUJI GRINDING WHEEL MFG 400Hz high frequency inverter power supplyPowered up compared to conventional products. Low noise and low vibration. It consumes less power and is economical. Dust prevention has been improved by installing a filter at the intake port. Various protection functions are enhanced by overcurrent detection. Detects overload. Detects power sho... Read MoreWidth (mm) 215 Power Supply Capacity (kVA) (Maximum) 4.2 or more Allowable Voltage Fluctuation [Input] 180-250V Height (mm) 255 Output Capacity (kVA) (Maximum) 4.2 or more Current (A) 11 Output Frequency (Hz) 400 Trusco Part No. 855-2658 Input Frequency (Hz) 50～60 Mass (kg) 8.5 Length (mm) 233 Power Cable (m) 3 (without plug) Motor Capacity (kW) 2.2 Type of Control Sine wave PWM methodfrom S$2,699.00Min. 32 days
-
- HIOS Power supply for CL-2000 charging driverDedicated power supply for electric screwdriver CL-2000. Supports a wide input voltage range. INPUT: 100V-240V It can be used with confidence even in an environment with severe voltage fluctuations.Power Capacity (W) 30 Included Accessories Inlet cord with ground 1.8m (2P) x 1 Dimensions, Width W x Depth D x Height H (mm) 95×160×52 Secondary Output HI / LOW two-step switching Max: 1A Mass (kg) About 0.71 Plug A-1 Trusco Part No. 344-4481Discontinued
- Leutor (NIHON SEIMITSU KIKAI KOSAKU) Micro grinder + leutor gold 2It is a power unitTrusco Part No. 115-0650Discontinued
-
- HIOS Power supply for DC driverPower Consumption (W) 84 Input Power AC100V Secondary Output Hi / Lo 2-step switching Max.3.5A Dimensions, Width W x Depth D x Height H (mm) 182×145×132 Trusco Part No. 290-1528 Power Cable 1.8m (AC / grounded inlet cord) Mass (kg) 4Discontinued
- Leutor (NIHON SEIMITSU KIKAI KOSAKU) LHB-12 power unitFull charge time: Approximately 2.5 to 3 hours Usage time: Approximately 2 hours (when fully charged, no load) It can be used while charging.Output Voltage (V) DC0～12 Recharging Time (hours) About 2.5-3 Fuse Capacity (A) 2 Battery Capacity (Ah) 1.8 Input Voltage (V) DC18Discontinued
- HIOS Power supply for CL-4000 charging driverDedicated power supply for electric screwdriver CL-4000.Secondary Output 2.5A Dimensions (mm) 105×185×91 Mass (kg) 2.7 Cable Length (m) 1.8 (Inlet type with ground) primary input power supply AC100V 50/60HzDiscontinued
- Panasonic Power cord packBattery Voltage (V) 12 Power Input (V) 100 Mass (kg) 0.20 (excluding the weight of the cord) Cable Length (m) 10Discontinued
- FUJI GRINDING WHEEL MFG High frequency inverter power supplyLow noise and low vibration. It consumes less power and is economical. Equipped with various protection functions such as overcurrent / overvoltage / instantaneous power failure detection trip and electronic thermal relay trip, you can use it with confidence. The frequency is shared by 50Hz / 60Hz.Input Frequency (Hz) 50、60 Mass (kg) 18.5 Output Frequency (Hz) 250 Output Voltage (V) Three-phase AC 200 Input Voltage (V) Three-phase AC 200 Trusco Part No. 408-4705 Capacity (kVA) (Inverter) Maximum 9Discontinued
- HIOS Dedicated power supplyA dedicated power supply is required to drive the HIOS power supply driver (DC driver). The dedicated power supply takes the current (primary side) directly from the AC outlet, converts it to a low voltage (approximately HI: approx. 30V, LOW: approx. 20V), and supplies it to the DC driver. Safe a... Read MoreIncluded Accessories Inlet cord with grounding 1.8m x 1 Power Capacity (W) 48 Mass (kg) About 2.7 Dimensions, Width W x Depth D x Height H (mm) 105×185×91 Plug A-1 Primary Side Input Voltage AC100V±5%(50/60Hz) Secondary Output HI / LOW 2-step switching Max. 2.5ADiscontinued
- Nidec Shibaura 400Hz high frequency inverter power supply-Since it does not have a commutator, there is no need to replace the brush, and it is the most suitable power tool for grinding work in terms of durability and maintenance. -Suitable for heavy grinding work with a maximum output of more than a pneumatic grinder. -Since the rotation speed does no... Read MoreHeight (mm) 163 Mass (kg) 6.0 input side voltage 3-phase 200V-220V 50 / 60Hz output side voltage 400Hz/3.2kVA Length (mm) 245 Width (mm) 210Discontinued
- Minitor DC power packDimensions, Width W x Depth D x Height H (mm) 144×218×116 Rated Input (VA) 60 Input Voltage (V) AC100±5%(50/60Hz) Output Voltage (V) DC3～30 Included Accessories Rubber Cradle (RM11) x 1Discontinued
- Nidec Techno Motor High frequency inverter power supplyLow noise and low vibration. Low power consumption and economical. Equipped with various protection functions, this inverter power supply provides peace of mind even in the event of an emergency. No failure due to dust-proof structure.Cable Length (m) 3Discontinued
- HIOS Power supply for electric screwdriverInput power (V) AC100～240 Width (mm) 88 Trusco Part No. 344-4490 Length (mm) 210 Height (mm) 52 Mass (g) 715 Power Consumption (W) 48Discontinued
- Minitor Polyter power packWhen too much current flows through the DC motor handpiece, a beep sounds to alert you before the overload function is activated. (Volume can be adjusted) The buzzer of the power pack makes it possible to clearly recognize the start / stop. This is especially effective for polyter handpieces wher... Read MoreOutput Voltage (V) DC3～30・AC MAX80(25±5kHz) Dimensions, Width W x Depth D x Height H (mm) 144×218×116 Input Voltage (V) AC100±5%(50/60Hz)Discontinued
- HIOS DC driver dedicated power supplyA dedicated power supply is required to drive the HIOS power supply driver (DC driver). The dedicated power supply takes the current (primary side) directly from the AC outlet, converts it to a low voltage (approximately HI: approx. 30V, LOW: approx. 20V), and supplies it to the DC driver. Safe a... Read MoreMass (kg) About 4 Primary Side Input Voltage AC100V±5%(50/60Hz) Dimensions, Width W x Depth D x Height H (mm) 182×140×132 Included Accessories Inlet cord with grounding 1.8m x 1 Power Capacity (W) 68 Secondary Output HI / LOW 2-step switching Max: 3.5A Specification Built-in control function Plug A-1Discontinued
