Dust collection attachment! Achieves clean work by connecting to a dust collector Transparent structure that allows you to clearly see the position of the cutting edge! This one unit is compatible with 105 mm and 125 mm diamond cutters. With depth adjustment function
For diamond cutter
* Diamond ... Read More
RoHS directive (corresponding to 10 substances) Correspondence
Dust collection attachment! It is an environmentally friendly product that absorbs grinding dust, etc. inside the dust collector and leaves almost no outside. It has a high dust collection rate, is easy to operate, and is an easy-to-hold type that allows for corner work. Unused body cover and cor... Read More
Dimension (mm) 160×148×50 RoHS directive (corresponding to 10 substances) Correspondence
Maximize the capabilities of the Mactle series. Ruler function ・ Adjusts the depth of the blade to keep it constant, preventing deep damage to the base. The inside corner is also OK. ・ The cap at the tip can be attached and detached, so you can enter to the very limit of the inside corner.
* If... Read More
RoHS directive (corresponding to 10 substances) Correspondence
Amazing dust collecting power without a dust collector !! Self-dust collection rate of 90% or more You can work comfortably even in places or high places where you cannot bring a dust collector. Powerful built-in large fan collects dust !!
For 4-inch disc grinder only
* Disc grinder and diamond c... Read More
Dimension (mm) 180×157×79 RoHS directive (corresponding to 10 substances) Correspondence
Amazing dust collecting power without a dust collector !! Self-dust collection rate of 90% or more You can work comfortably even in places or high places where you cannot bring a dust collector. Powerful built-in large fan collects dust !!
For 4-inch disc grinder only
* Disc grinder and diamond c... Read More
Dimension (mm) 180×157×79 RoHS directive (corresponding to 10 substances) Correspondence Suitable Model Makita: 9533 series / GA403 series
Uses a newly developed slide-type cutter replacement system. The cutter can be replaced with the grinder attached. (Easy cutter replacement system) By simply replacing the connection part, it is compatible with a wide range of grinders from various manufacturers. (Universal design) Uses a "t... Read More
Chamfering cutter diameter (mm) 105 Cutting Depth (mm) 5～23 Mass of Main Unit (g) About 520 Dust back Approx. 3 m (Estimated dust disposal)
A total of 6 O-ring sets for high pressure washers.
Replace when both ends of the high-pressure hose and the O-ring at the end of the lance are worn out
Mass of Main Unit (g) 1 Dimensions, Width W x Height H x Depth D (mm) 2×13×13 Trusco Part No. 819-0903 Suitable Model AQT3311
Standard gun
Easy connection with high pressure hose with Quick Connect
Mass of Main Unit (g) 395 Mass (g) 395 Dimensions, Width W x Height H x Depth D (mm) 410×160×51 Trusco Part No. 819-0902 Specification Bosch high pressure washer gun Material Polyamide resin
Suitable Model AQT33-11、UA125 Length (m) 0.415 Dimensions (Width W x Depth D) (mm) 38×43 Trusco Part No. 166-3465 Specification Easy connection of tip nozzle Material Polyamide resin Mass (g) 200
A bellows-shaped resin skirt shuts out dust scattering. A part of the cover is removable and can be used for grinding at the very limit of the inside corner. It is used by attaching it to various 100 mm disc granders. Please use it by connecting it to your existing dust collector. Hose and grinde... Read More
RoHS directive (corresponding to 10 substances) Correspondence
Approximately 90% dust collection efficiency achieved without using a dust collector !! When connected to a dust collector, you can work comfortably even in places or high places where you cannot bring in a dust collector with 95% efficiency.
For 4-inch disc grinder only
Duct Diameter (Φmm) 34 Cutting Depth (mm) 5～23 RoHS directive (corresponding to 10 substances) Correspondence Reference Capacity Dust pack dust disposal: about every 3m
Industry's first! Dust collection rate of about 91% without using a cleaner! (In the case of concrete cutting work with a disc grinder with a maximum output of 960 W and 9000 min -1 (according to the manufacturer)) Uses a newly developed guide base mechanism. Achieved improved safety during w... Read More
Included Accessories 3 dust bags Mass (g) 620 RoHS directive (corresponding to 10 substances) Correspondence
A simple and very convenient dust collection cover for disc grinders. It can be attached to most of your power tools now. Used by connecting to a dust collector. Since the transparent cover covers it completely, dust is completely shut out !! The height of the cover can be adjusted according to t... Read More
Suitable Hose Inner Diameter (Φmm) 38 RoHS directive (corresponding to 10 substances) Correspondence Suitable Model G 13SM2、G 13SH、G 13S4、G 13YH、G 13YA1
Equipped with the world's first "self-dust collection function" that collects 90% or more of dust without connecting a cleaner Uses a heat-resistant resin cover that can withstand high-temperature dust generated when using a 125 mm cutter. Furthermore, by filling with silicon to inc... Read More
Chamfering cutter diameter (mm) 125 Cutting Depth (mm) 5～33 Mass of Main Unit (g) About 520 Dust back Approx. 2 m (Estimated dust disposal) Abrasive Materials Soft materials (blocks, bricks, etc.)
For Φ100 / Φ125 siding discs. Dust collection attachment for coating film / rust removing grinding Dust is efficiently collected at a dust collection rate of 80% or more without using a dust collector during coating film / rust removing grinding work. The built-in large fan is rotated by the powe... Read More
Corresponding size (Φmm) 100 x 15.9H or 125 x 15.9H Dimension (mm) 180×173×89 RoHS directive (corresponding to 10 substances) Correspondence Type For Makita
Sankyo Diamond Industrial For clean thick kun cuttingDust collection attachment! Achieves clean work by connecting to a dust collector Transparent structure that allows you to clearly see the position of the cutting edge! This one unit is compatible with 105 mm and 125 mm diamond cutters. With depth adjustment function For diamond cutter * Diamond ... Read MoreRoHS directive (corresponding to 10 substances) Correspondence
