Stable work is possible by attaching a trimmer. Since it is a simple type, it can be installed only when working in the field or using it, for example. There are two dovetail grooves (length 90 mm) for fixing the clamp on the back side.
"For trimmers other than Bush and Ryobi, you need to ma... Read More
Dimensions, Vertical x Horizontal x Height (mm) 295 x 395 x 93 (fence height 75)
If you use a dovetail jig, you can easily perform ant assembly processing with 1/2 inch (12.7 mm) intervals. Includes aluminum template for 1/2 (12.7mm) dovetail and bit for dovetail (with 6mm shaft bearing). Router-/ Domestic manufacturer-trimmer-usable (6mm axis) trimmer-can be processed cleanl... Read More
Applicable Plate Thickness (mm) 8(5/16")～32(1-1/4") Mass (g) About 9.5 Maximum machining width (mm) 300(12") Dimensions (Length L x Width W x Height H) (mm) 430×280×170
Table saw height / router-bit height / router Convenient for measuring table fences. Since it has a magnet, it can be fixed to the table top with a magnet for stable measurement. It can also be used as a tray for placing pencils and writing tools. With Japanese instruction manual.
Multi-functional push block. For ripping and routing. The ergonomically designed comfort grip handle provides excellent stability and superlative grip. Protect your fingertips from cutting tools. The diamond grip rubber is used on the bottom to prevent scratches on the stock while demonstrating m... Read More
Easy to use and can be drilled straight. The rounded digging corners machined with a trimmer are machined at a right angle of 90 degrees. A chisel blade made of hardened steel. Hit it against the round corners and hit it with a hammer.
Material Hardened steel (chisel blade) Dimensions (cm) 7×1.9×2 Mass (g) About 70
Ideal for dowels, mortises and router finishes. Since the sub-base surface is wide, stable work is possible. It can be used for trimmers from manufacturers such as Makita, Hitachi, RYOBI, and Bosch.
Yasuki Steel Aogami No. 1 is used. You can use it by grinding up to the pattern book. (FR2221, HSSC is high-speed steel)
Wood carving
* HHD-10 has a blade width of up to 12 mm, and KHD-2 has a blade width of up to 10 mm.
Blade Width (mm) 21 Mass (g) 22 Shape Asamaru Trusco Part No. 818-3122 Overall Length 63 Blade Thickness (mm) 2.2
Yasuki Steel Aogami No. 1 is used. You can use it by grinding up to the pattern book. (FR2221, HSSC is high-speed steel)
Wood carving, wood carving, painting / adhesive peeling
* HHD-10 has a blade width of up to 12 mm, and KHD-2 has a blade width of up to 10 mm.
Mass (g) 10 Blade Thickness (mm) 2.2 Blade Width (mm) 21 Overall Length 47 Trusco Part No. 799-9151 Shape Flat
Yasuki Steel Aogami No. 1 is used. You can use it by grinding up to the pattern book. (FR2221, HSSC is high-speed steel)
Wood carving
* HHD-10 has a blade width of up to 12 mm, and KHD-2 has a blade width of up to 10 mm.
Yasuki Steel Aogami No. 1 is used. You can use it by grinding up to the pattern book. (FR2221, HSSC is high-speed steel)
Wood carving
* HHD-10 has a blade width of up to 12 mm, and KHD-2 has a blade width of up to 10 mm.
Shape Round Blade Width (mm) 3 Blade Thickness (mm) 2.2 Mass (g) 8 Trusco Part No. 818-3123 Overall Length 45
Yasuki Steel Aogami No. 1 is used. You can use it by grinding up to the pattern book. (FR2221, HSSC is high-speed steel)
Wood carving
* HHD-10 has a blade width of up to 12 mm, and KHD-2 has a blade width of up to 10 mm.
Yasuki Steel Aogami No. 1 is used. You can use it by grinding up to the pattern book. (FR2221, HSSC is high-speed steel)
Wood carving
* HHD-10 has a blade width of up to 12 mm, and KHD-2 has a blade width of up to 10 mm.
Yasuki Steel Aogami No. 1 is used. You can use it by grinding up to the pattern book. (FR2221, HSSC is high-speed steel)
Wood carving
* HHD-10 has a blade width of up to 12 mm, and KHD-2 has a blade width of up to 10 mm.
Yasuki Steel Aogami No. 1 is used. You can use it by grinding up to the pattern book. (FR2221, HSSC is high-speed steel)
Wood carving
* HHD-10 has a blade width of up to 12 mm, and KHD-2 has a blade width of up to 10 mm.
Yasuki Steel Aogami No. 1 is used. You can use it by grinding up to the pattern book. (FR2221, HSSC is high-speed steel)
Wood carving
* HHD-10 has a blade width of up to 12 mm, and KHD-2 has a blade width of up to 10 mm.
Overall Length (mm) 45 Shape Seal right Blade Width (mm) 9 Blade Thickness (mm) 2.2 Mass (g) 10 Trusco Part No. 799-8988
It is a part of the handle used for sharpening and hand-carving the blade (common blade) of the wood carving machine made by the manufacturer. It can also be used as a replacement blade type chisel by attaching a common replacement blade width of 3 mm to 21 mm (28 types) of the manufacturer's... Read More
Mass (g) 100 Outer Diameter (Φmm) 12 Overall Length (mm) 121 Dimensions, Vertical x Horizontal x Height (mm) 12×120×12 Replacement Blades 28 kinds of common spare blades Trusco Part No. 799-9399 Shape Cylindrical Material Metal Set Contents Multi-holder MH-1 x 1 and detent pin x 1
Yasuki Steel Aogami No. 1 is used. You can use it by grinding up to the pattern book. (FR2221, HSSC is high-speed steel)
Wood carving
* HHD-10 has a blade width of up to 12 mm, and KHD-2 has a blade width of up to 10 mm.
Yasuki Steel Aogami No. 1 is used. You can use it by grinding up to the pattern book. (FR2221, HSSC is high-speed steel)
Wood carving
* HHD-10 has a blade width of up to 12 mm, and KHD-2 has a blade width of up to 10 mm.
Yasuki Steel Aogami No. 1 is used. You can use it by grinding up to the pattern book. (FR2221, HSSC is high-speed steel)
Wood carving
* HHD-10 has a blade width of up to 12 mm, and KHD-2 has a blade width of up to 10 mm.
Yasuki Steel Aogami No. 1 is used. You can use it by grinding up to the pattern book. (FR2221, HSSC is high-speed steel)
Wood carving
* HHD-10 has a blade width of up to 12 mm, and KHD-2 has a blade width of up to 10 mm.
Trusco Part No. 818-3128 Mass (g) 20 Shape Asamaru Long Blade Thickness (mm) 2.2 Overall Length 75 Blade Width (mm) 15
You can use your router to cut out circles with a diameter of 38 to 305 mm. The 330mm offset base provides even more stability during edge processing. An easy-to-grip oversized handle knob gives you great control over your router.
Yasuki Steel Aogami No. 1 is used. You can use it by grinding up to the pattern book. (FR2221, HSSC is high-speed steel)
Wood carving
* HHD-10 has a blade width of up to 12 mm, and KHD-2 has a blade width of up to 10 mm.
Blade Width (mm) 12 Blade Thickness (mm) 2.2 Mass (g) 18 Overall Length 75 Trusco Part No. 818-3127 Shape Round long
Yasuki Steel Aogami No. 1 is used. You can use it by grinding up to the pattern book. (FR2221, HSSC is high-speed steel)
Wood carving
* HHD-10 has a blade width of up to 12 mm, and KHD-2 has a blade width of up to 10 mm.
Mass (g) 20 Overall Length 63 Trusco Part No. 818-3121 Shape Round Blade Width (mm) 15 Blade Thickness (mm) 2.2
Yasuki Steel Aogami No. 1 is used. You can use it by grinding up to the pattern book. (FR2221, HSSC is high-speed steel)
Wood carving
* HHD-10 has a blade width of up to 12 mm, and KHD-2 has a blade width of up to 10 mm.
Blade Width (mm) 9 Shape Round Mass (g) 11 Trusco Part No. 818-3125 Blade Thickness (mm) 2.2 Overall Length 45
Milescraft Dual / tandem feather board doubleIncludes miter bar for 3/4 5/8 rails. Includes 1/4 "T-Track Bolts. English instruction manual included.Mass (g) About 725 Dimensions (cm) 24.3×21×5.8from S$119.90Min. 2 days
