Drill Chucks
Other Related Pages
Panasonic Dedicated Φ6.5mm chuckMass (g) 114.5 Chucking Size (mm) 1～6.5 Dimension D (Φmm) 1～6.5 Trusco Part No. 450-8823 Shaft Diameter 6.35 Dimension L (mm) 77 (size up to the stepped part is 11.5) Type For one-touch chuckfrom S$47.99Min. 6 days- MonotaRO Drill Chuck Keyless TypeThe keyless type allows easy installation of tip tools. Since it is a drill chuck compatible with the hexagonal shaft of 6.35 mm of the drill driver, it is possible to work with general-purpose drills and grindstones with shafts. For drilling with an electric drill. For polishing with a whetstone... Read MoreShank Diameter (Φmm) 6.35
- MonotaRO Drill Chuck with Key TypeSince it is a drill chuck compatible with the hexagonal shaft of 6.35 mm of the drill driver, it is possible to work with general-purpose drills and grindstones with shafts. For drilling with an electric drill. For polishing with a whetstone with a shaft. * Please use it after confirming the corr... Read MoreShank Diameter (Φmm) 6.35 Included Accessories Chuck handle
- ANEX Keyless Drill Chuck Compatible to ImpactCompatible with impact drivers. A ratchet lock mechanism that prevents the tip tool from coming off or loosening. The release nut solves the problem of biting due to strong tightening. Attached to a charging driver, drilled holes, and polished with a whetstone with a shaft.Shaft Diameter 6.35 Hex Shank across Flats 6.35
- MonotaRO Drill chuck Keyless impact responseA drill chuck for drill drivers and impact drivers. For drill drivers and impact drivers. For drilling holes. * Please use it after confirming the correct application and tip tool applicable size. *Please wear protective glasses when using. *Please start using after confirming the installation of... Read MoreShank Diameter (Φmm) 6.35 Withstand load N ・ m (kgf ・ m) 70
- MonotaRO Spare shaft for drill chuckReplacement shaft * Do not use for any other purpose.Mass (g) 35 Shank Diameter (Φmm) 6.35 Withstand load N ・ m (kgf ・ m) 70 (maximum replacement axis)
- ANEX Impact rubber drill chuckSupports biting of tip tools Impact support with release nuts Strong hexagonal shank that is resistant to breakage Hand-friendly rubber grip For attachment of drill blade and electric screwdriverShaft Diameter 6.35 Hex Size, Across Flats (mm) 6.35 Material Nylon elastomer, special alloy steel
- VESSEL Drill Chuck (with Key)Outstanding grasping power and high precision. Shaft with excellent durability. Attach and detach the tip tool with the attached key. For air / electric screwdriver
-
- ANEX Keyless drill chuckCompact and lightweight type drill chuck. It can be attached to a charging driver, drilled, and polished with a whetstone with a shaft.Chucking Size (mm) 1.5 ～ 6.5 Mass (g) 104 Trusco Part No. 469-7685 Shaft Diameter 6.35 Hex Size, Across Flats (mm) 6.35 hex axis Overall Length (mm) 70
-
-
- MonotaRO Drill chuck hybrid typeIt is a combined type with keyless and key. Since it is a drill chuck compatible with the hexagonal shaft of 6.35 mm of the drill driver, it is possible to work with general-purpose drills and grindstones with shafts. For drilling with an electric drill. For polishing with a whetstone with a shaf... Read MoreMounting dimensions (mm) 1.5～13 Mass (g) 460 Shank Diameter (Φmm) 6.35 Dimension L2 (mm) 60(±0.5) Withstand load N ・ m (kgf ・ m) 70 (maximum hexagonal axis) Included Accessories Chuck handle Dimension L1 (mm) Up to 73 Dimension D2 (mm) Φ29.5(-0.5) Dimension D1 (mm) Φ43(-0.5)
- AX BRAIN Keyless chuck for hammer drillThe soft resin does not hurt your hands and prevents rotational heat during use! SDS shank for hammer drills. Durability is improved by the powerful shank! With a lock function that locks at the final tightening position. With a release function that can be released when the tool cannot be removed.Shank Diameter (Φmm) 10 Shaft Diameter 10 Dimension B (mm) 114 Maximum Diameter at the Top (mm) 13 Chucking Size (mm) 13 Mass (g) 330 Dimension A (mm) 54 Type Only for rotation
- VERSOS Drill bit grinding machineRated Time (minutes) 15 or less (5 minute interval) Chucking Size (mm) 16 Shaft Diameter 16 Rotation Speed at No Load (min-1[rpm]) 1600 Polishing size (mm) 3.～16 Input power (W) 40 Power Input (V) AC100(50/60) Mass (kg) About 1.6 Dimensions, Width W x Depth D x Height H (mm) Approx. 120 × 110 × 165 Color Black
- TRUSCO Keyless drill chuck (Ratchet lock mechanism)Compatible with impact drivers. A ratchet lock mechanism that prevents the tip tool from coming off or loosening. The problem of biting due to strong tightening is dealt with with a release nut.Shaft Diameter 6.35
- TRUSCO Keyless Drill Chuck 6.5 MmSimple keyless type. Attached to a charging driver, drilled holes, and polished with a whetstone with a shaft.Chucking Size (mm) 1.5～6.5 Trusco Part No. 270-9406 Shaft Diameter 6.35 Overall Length (mm) 70 Mass (g) 95
- VESSEL Drill chuck (hybrid)Outstanding grasping power and high precision. Shaft with excellent durability. Double-use type with and without keys.Chucking Size (mm) 1.5～10.0 Mass (g) 314 Trusco Part No. 371-2745 Set Contents Drill chuck (hybrid type) key
- TRUSCO Drill chuck 13mmThe use of a tough hexagonal shank drastically reduces the bending of the chuck shaft. Attached to a charging driver, drilled holes, and polished with a whetstone with a shaft.Chucking Size (mm) 1.5～13.0 Overall Length (mm) 103 Trusco Part No. 270-9449 Mass (g) 382 Shaft Diameter 6.35 Included Accessories Chuck key Square Drive (mm) Hex 6.35
- BOSCH Drill chuck adapter for battery toolsYou can drill holes with an impact driver. Uses a high-quality chuck with outstanding durability! Prevents bits from getting caught. Chuck fixing reverse screw prevents the chuck from falling off when used in reverse rotation.Chucking Size (mm) 1.0～10 Width Across Flats (mm) 6.35 Overall Length (mm) 84
- TRUSCO Keyless drill chuck (hybrid type)It is a dual-use type with a keyless specification and a release key. When the drill bites and cannot be removed, it can be removed by impact rotation of the impact driver. You can also use the unlock key. Attached to a charging driver, drilled holes, and polished with a whetstone with a shaft.Chucking Size (mm) 1.5～10.0 Overall Length (mm) 100 Trusco Part No. 270-9422 Mass (g) 329 Shaft Diameter 6.35
- ANEX Tough hexagon shankShank replacement parts for ANEX drill chuck series. It is tough and hard to break.Shaft Diameter 6.35 Hex Width Across (mm) 6.35 Trusco Part No. 803-6959 Screw size 9.52(3/8")
- SUNFLAG (SHINKI MFG) Drill chuck with keyIf you attach it to a charging screwdriver, you can perform various tasks such as drilling woodwork. Various work is possible with processing of thin metal plates, woodworking, plastic plates, and tip tools with shafts. * Please note that the joint may be damaged when used with a high torque type... Read MoreBit Shank across Flats (mm) 6.35
- PROXXON Small diameter drill chuckApplicable shaft diameter (Φmm) 0.5～3.2 Maximum Rotation Speed (min-1[rpm]) 25000 Mounting Screw M8×0.75
- SUNFLAG (SHINKI MFG) Chuck adapterStrong press-fit type JB-13 / CR-13 compatible. Parts for exclusive use of drill chuck.Size 1/2×20 Chucking Size (mm) 2.0～13.0 Mass (g) 44 Trusco Part No. 776-8745 RoHS directive (corresponding to 10 substances) Correspondence Shaft Diameter Hex axis 6.35
- BOSCH SDS13mm hammer chuckFor the first time in the world, this chuck is equipped with a round shank vibration drill bit on a hammer drill so that it can be used by rotating and striking. In addition, the striking of the hammer drill body is stopped, and the range of use of bits for ironwork and woodwork is widened just b... Read MoreGripping Diameter (Φmm) 2.5-13 Suitable for PBH180RE/PBH160R/N Trusco Part No. 378-4401 Overall Length (mm) 127 Specification With chuck handle
- SUNFLAG (SHINKI MFG) Drill chuck for hammer drillIf you attach it to a charging screwdriver, you can perform various tasks such as drilling woodwork.
- Panasonic Drill chuckDimension D (Φmm) 1～6.5 Trusco Part No. 450-8963 Dimension L (mm) 77 (size up to stepped part is 13) Suitable for EZ7410LA1S-B、EZ7410LA1S-R、EZ7410LA1S-A Type For one-touch chuck
- JEFCOM (DENSAN) Drill chuck for hammer drillYou can use a straight shank tool with a hammer drill (SDS). Durability is improved by a powerful shank! Cushion grip: Does not hurt your hands when tightening or releasing. Relieves heat during use Lock function: Locks at the final tightening position Release function: Can be released when the t... Read MoreChucking Size (mm) 1.5～13 Shank Diameter (Φmm) 10 Specification Keyless type, rotation only Shaft Diameter SDS Shank (10mm)from S$79.99Min. 2 days
- SUNFLAG (SHINKI MFG) Keyless drill chuckSecurely fix the tip tool with high precision holding force. If you attach it to a charging screwdriver, you can perform various tasks such as drilling holes in woodwork. Forward and reverse compatible. *When using an impact driver for continuous impact rotation, please be careful as the shaft ma... Read MoreRoHS directive (corresponding to 10 substances) Correspondence Type Soft grip 2 piece type
- ANEX Bit Replacement Rubber Drill ChuckCan be replaced even if the shaft is broken. Bit replaceable release nut makes it easy to release biting due to strong tightening. Hand-friendly rubber grip A charging driver can be attached to drill holes and grind with a whetstone with a shaft.Shaft Diameter 6.35
- TRUSCO Shank for drill chuckA tough hexagonal shank for drill chucks.Mass (g) 32 Trusco Part No. 419-9731 Overall Length (mm) 55 Shaft Diameter 6.35 Hex shaft width across flats (mm) 6.35
- TOP KOGYO Drill chuck for electric drillIt can be attached to an electric drill with a single touch using a hexagonal shaft shank. It can be used by attaching straight bits, woodworking drills, short bits, etc. It can be repaired by selling the shank separately.from S$37.99Min. 2 days
- VESSEL Drill chuck keyless 10Various operations such as drilling with a tip tool, polishing with a whetstone with a shaft, and tightening screws with a bit are possible. For air / electric screwdriver
- TRUSCO Electric precision drill chuckA precision drill chuck that can be attached to a charging driver. A precision drill chuck that is ideal for drilling fine-sized holes and deburring. For drilling holes in the base. For construction work, interior work, and electrical work.Performance (Collet) 0.1-2.5mm, 1.2-3.2mm Width Across Flats (mm) (Shaft) 6.35, (Mounting part) 6.35 Chucking Size (mm) 0.1～2.5、1.2～3.2 Mass (g) 43 Shaft Diameter 6.35 Overall Length (mm) 65 Trusco Part No. 819-1377
- ANEX Drill chuckTough hexagonal shank with outstanding toughness, abrasion resistance, and impact resistance Attached to a charging screwdriver, drilled, and convenient for polishing with a whetstone with a shaft.Width Across Flats (mm) 6.35 Shank Shape Tough hexagon shank Chuck With chuck keyfrom S$29.99Min. 2 days
- TRUSCO Drill chuck 10mmThe use of a tough hexagonal shank drastically reduces the bending of the chuck shaft. Attached to a charging driver, drilled holes, and polished with a whetstone with a shaft.Chucking Size (mm) 1.5～10.0 Mass (g) 202 Trusco Part No. 270-9431 Shaft Diameter 6.35 Overall Length (mm) 90 Included Accessories Chuck key Square Drive (mm) Hex 6.35from S$39.99Min. 2 days
- PROXXON Drill chuck for milling machineWhen used as a drilling machineMounting dimensions (mm) (Drill) 1.0-10 Mounting Screw 1/2 inch -20 screw
- Ko-Ken (Yamashita Industrial Lab) 1 / 2sq. Drill chuck adapterSquare Drive (mm) 1/2"(12.7mm)SQ Square Drive (mm[inch]) 12.7[1/2] Dimension H (mm) 22 Dimension D (mm) 25 Dimension L (mm) 44 RoHS directive (corresponding to 10 substances) Correspondence
- Mr. Meister Drill chuck MT-3It is the same as the drill chuck standard for the precision tabletop milling machine Little Milling 9.Gripping Diameter (Φmm) 1.0～13 Chucking Size (mm) 1～13 RoHS directive (corresponding to 10 substances) Correspondence Set Contents Drill chuck / chuck key Taper MT-3 Shaft Diameter MT-3from S$149.90Min. 2 days
