Stepless adjustment is possible from M1.0 to M5.0. There is no additional cost even if you change the line. Reliable transport with rotating drum and horizontal vibration rail. There is no clogging of the rail due to dust. Even screws with a short overall length or screws with a thin head can be ... Read More
Outer Dimensions, Width W x Depth D x Height H (mm) 126×182×147 Mass (kg) 2.17 screw capacity (cc) 200～220 RoHS directive (corresponding to 10 substances) Correspondence Input power (V) DC12～15 Applicable screw neck length (mm) Up to 19
Compatible with 2 types of screws. Easy to use and smooth screw supply. Rails can be replaced. It corresponds to the standard bit of each manufacturer.
Dimensions, Width W x Depth D x Height H (mm) 130×215×136 Suitable Screw (mm) Neck length (longest) / up to 18 screw capacity (cc) 150 Output Voltage (V) 12 Input power (V) 100(50/60Hz) Current (mA) 500 Mass (kg) 3.2
General painting, accessory painting, etc.
For various paintings, dusters, etc.
Power Consumption (W) 110 air volume (L) 20 per minute (at 0.2MPa) Mass (kg) 3.9 Rated usage time (minutes) 30 Dimensions (width x depth x height) (mm) Aircraft: 275 x 120 x 175 Power Input (V) 100 50/60Hz Compressed Air Connection G / 8 convex (PF1 / 8 convex)
An environmentally friendly machine that reduces chip emissions. A small and lightweight rolling machine. Achieves high-speed screw rolling. Comes with stationary carbon (NZTS20A, NZTF50A). It also supports cutting screw machining by using a die head.
Rotation Speed at No Load (min-1[rpm]) 31 Tank Capacity (L) 4.0 Main Unit Dimensions, Length L x Width W x Height H (mm) 540×480×405 Mass of Main Unit (kg) 63 Set Contents Rolling head (SRH-20A (3 / 4B)) Performance Thread rolling: 3 / 8B-3 / 4B
An environmentally friendly machine that reduces chip emissions. A small and lightweight rolling machine. Achieves high-speed screw rolling. Comes with stationary carbon (NZTS20A, NZTF50A). It also supports cutting screw machining by using a die head. There is no rolling head.
Tank Capacity (L) 4.0 Mass of Main Unit (kg) 123 Performance Thread rolling: 3 / 8B-2.1 / 2B Main Unit Dimensions, Length L x Width W x Height H (mm) 873×635×558
Compatible with 4 types of screws. Easy to use and smooth screw supply. Rails can be replaced. It corresponds to the standard bit of each manufacturer. It can also be used for suction type. Standard rails and passing plates are set for each model.
For supplying a large amount of screws
・ If you have a 100 V power supply, you can use it anywhere.・ One action to switch between forward and reverse rotation with a single lever. -The plug-in relay is easy to replace. Life is also extended.
Trusco Part No. 123-9732 Type Electric natter Mass (kg) 2.5
One unit can handle various screws. Rail width can be adjusted from M1.0 to M5.0. Screws with a short overall length that could not be handled by our original transport method are also OK! You can select from M1, M2, M3, M4, and M5 by default. Of course, you can change the settings yourself.
For ... Read More
Outer Dimensions, Width W x Depth D x Height H (mm) 126×182×147 Mass (kg) 2.17 screw capacity (cc) 200～220 Power Input (V) AC100～240、DC15 Applicable screw neck length (mm) Up to 19
