Ultrasonic Cutters
Other Related Pages
Honda Electronics Ultrasonic Cutter USW-335Ti / Ultrasonic Engraving Sword USW-334ekCarbide blade for USW-334, USW-335TiAs ONE Part Number 61-0174-22 Material Tungsten carbide Type USW-334 / USW-335Ti carbide blade 1 pc.- Honda Electronics Ultrasonic CutterWith a handpiece holder, it is a size that does not bother you in storage. Since the blade vibrates at high speed of 40,000 times per second due to the vibration of ultrasonic waves, it can be cut with less force and the cut surface is clean. Gate cutting and deburring of plastics, small items, p... Read MorePower adapter AC100～240V/80VA、OUTPUT：DC12V/3.3A Cable Length (m) Handpiece cable: 1.6 (straight) Operating Temperature Range (℃) 10～35 Oscillation Frequency (kHz) 40 Operating Humidity Range Humidity 20-70% (but no condensation) Power Consumption (W) Up to 40
- Honda Electronics Ultrasonic cutterWith a handpiece holder, it is a size that does not bother you in storage. Since the blade vibrates at high speed of 40,000 times per second due to the vibration of ultrasonic waves, it can be cut with less force and the cut surface is clean. Gate cutting and deburring of plastics, small items, p... Read MoreOscillation Frequency (kHz) 40 Maximum Consumption (VA) About 25 Cable Length (m) Handpiece cable: 1.6 (straight) Operating Humidity Range Humidity 20-70% (but no condensation) Operating Temperature Range (℃) 10～35 AC Power Input (V) 100
- Nippon Alex Ultrasonic cutterA handy type cutter that can cut straight lines and curves as if it were a pen. Commercially available blades can also be used as spare blades. Since it melts with minute vibrations of 40,000 times per second, plastic products, films, textile products, etc. can be cut smoothly.Dimension (mm) 270×170×140 Mass (kg) 3 Maximum Output (W) 30 Frequency (kHz) 40 Cable Length (cm) 50 Power Supply AC100V・50/60Hz Included Accessories Foot switch, 20 replaceable blades Handpiece Dimensions (mm) Φ26×200from S$1,999.00Min. 2 days
- Honda Electronics Ultrasonic Cutter USW-335Ti / Ultrasonic Engraving Sword USW-334ekHex wrench for USW-334, USW-334ekAs ONE Part Number 61-0174-34 Type Hexagon wrench for USW-334 / USW-334ekfrom S$2.09Min. 16 days
- NAKANISHI (NSK) Sonic Cutter ZERO HandpieceRoHS directive (corresponding to 10 substances) Correspondencefrom S$1,499.00Min. 7 days
- Honda Electronics Ultrasonic Cutter"Plastic cuts like butter" The ultrasonic cutter for hobby uses the blade + vibration + frictional heat to shorten the work time by transmitting the slight vibration of ultrasonic waves to the tip of the blade, file, grindstone, etc. It is a tool. (Cutter blades cannot cut anything that... Read MoreCable Length (m) 1.6 (straight / handpiece cable) Operating Temperature Range (℃) 10-35 (however, no condensation) Power Consumption (VA) 110 Oscillation Frequency (kHz) 40from S$1,499.00Min. 2 days
-
-
-
-
-
-
-
-
-
- NAKANISHI (NSK) Sonic Cutter ZERO SetIt is effective for cutting that requires complicated shapes and precision. (Cloth, rubber, film, plastic, urethane, pattern correction of printed circuit board, etc.) Since there is no vibration transmitted to the hand, the cutting edge can be applied accurately and high-precision cutting is pos... Read MoreCable Length (m) 2 RoHS directive (corresponding to 10 substances) Correspondencefrom S$2,699.00Min. 7 days
- NAKANISHI (NSK) Sonic Cutter ZERO ControllerIt is a cutting power with an oscillation frequency of 38-40kHz and a maximum instantaneous output of 30W. Output level / amplitude display that is easy to see with the digital display function. LED is used to improve visibility and prevent erroneous operation. Equipped with heat generation prote... Read MoreMass (kg) 1.4 Outer Dimensions, Width W x Depth D x Height H (mm) 161×256×84 Cable Length (m) 2 Maximum Output (W) 30 (moment) Oscillation Frequency (kHz) 30～48 Input power (V) AC100～240 RoHS directive (corresponding to 10 substances) Correspondence Included Accessories Fuse (T1.6AH 250V) x 2 / Power cord (2m)from S$1,399.00Min. 7 days
-
-
-
-
- AS ONE Ultrasonic Cutter* We do not deliver to private homes (detached houses / apartments).As ONE Part Number 6-6253-02 Specification Titanium hornfrom S$2,799.00Min. 13 days
-
-
-
-
-
-
- Honda Electronics Ultrasonic cutterWith a handpiece holder, it is a size that does not bother you in storage. Since the blade vibrates at high speed of 40,000 times per second due to the vibration of ultrasonic waves, it can be cut with less force and the cut surface is clean. With a simple operation of pressing the switch at hand... Read MoreOscillation Frequency (kHz) 40 Maximum Consumption (VA) 25 Rated Output (W) 20 Output Cable (cm) 50 (Curl code) Power Cable (m) 1.4 AC Power Input (V) 100(50/60Hz) Handpiece Dimensions (mm) Φ34×139 Maximum Output (W) 20Discontinued
- AS ONE Ultrasonic mini cutterIt can be stored in an aluminum case and is easy to carry. The blade vibrates about 22000 times per second and the cut surface is clean. No troublesome adjustment is required just by turning on the switch. Cutting work can be done smoothly with a light force.Maximum power consumption (A) 1 Frequency (kHz) 22 Outer Dimensions (mm) 230×275×120 Maximum Output (W) 30 As ONE Part Number 6-4048-01 Power Input (V) AC100 50/60Hz Mass (kg) About 3.1 Mass (g) Handpiece (about 70) Handpiece Dimensions (mm) Φ25×190Discontinued
- Honda Electronics Ultrasonic cutterThe blade vibrates about 22,000 times per second due to the vibration of ultrasonic waves, so the cut surface can be cut cleanly. The main body and other products are housed in an aluminum case, making it easy to carry. Since it is turned (ON / OFF) by the foot switch, it does not consume unneces... Read MoreCable Length (m) (Foot switch) 1.5 Mass (g) (Handpiece) 70 AC Power Input (V) 100(50/60Hz) Oscillation Frequency (kHz) 22 Maximum Output (W) 30 Power Cable (m) 1.5 Mass (kg) About 3.1 Handpiece Dimensions (mm) Φ25×190 Output cord length (m) 1.4Discontinued
- AS ONE Ultrasonic cutterCurrent (A) 0.7 Main Unit Dimensions (mm) 180×175×79 Cable Length (m) 2 Maximum Output (W) 35 (continuously variable) Frequency (kHz) 40 As ONE Part Number 6-8000-01 Power Input (V) AC100 50/60Hz Specification Titanium horn (high amplitude type) Handpiece Dimensions (mm) Φ34×216Discontinued
- Honda Electronics Ultrasonic cutterEquipped with the best sharpness super high mode as an ultrasonic cutter for hobby. The ultrasonic oscillator is a new design. (It took one year to develop an oscillator that has good sharpness and does not easily rise in temperature: Honda Electronics Ceramic Division) Input / output to the outs... Read MoreOscillation Frequency (kHz) 40 Maximum Output (W) 60 Power adapter AC100～240V(50/60Hz)、OUTPUT：100V/5ADiscontinued
- SUZUKI MOTOR Ultrasonic Cutter (Hand Switch)With ultrasonic vibration of 40,000 times per second, no excessive force is required for cutting.Input Method (Handpiece) Push switch type Rated Current (A) (Oscillator) 0.7 Input Voltage (V) (Oscillator) AC100 (50 / 60Hz) Cable Length (m) 2 (Handpiece code / 2) Trusco Part No. 238-4558 Mass (kg) 3 (oscillator / 1.6) Maximum Output (W) 35 (continuously variable) Oscillation Frequency (kHz) 40 Power Consumption (W) 55 Replacement Blades H1 (standard), H2, H3, H4, H5 typeDiscontinued
-
- SUZUKI MOTOR Ultrasonic cutter (foot switch type)Ultrasonic vibrations of 40,000 times per second allow you to cut with light force. Effective for work that requires both hands.Oscillation Frequency (kHz) 40 Input Voltage (V) (Oscillator) AC100 (50 / 60Hz) Mass (kg) 3 (oscillator / 1.6) Rated Current (A) (Oscillator) 0.7 Cable Length (m) 2 (Handpiece code / 1.4) Dimensions, Width W x Depth D x Height H (mm) (Oscillator) 180 × 175 × 79 Input Method (Handpiece) Foot switch type Handpiece Dimensions (mm) 24×225 Power Consumption (W) 55 Maximum Output (W) 35 (continuously variable) Trusco Part No. 238-4574Discontinued
-
- NAKANISHI (NSK) High performance ultrasonic cutter (sonic cutter)A high-performance cutter that uses ultrasonic vibration power of 39,500 times per second. The lightweight pencil type can be operated freely, and even complicated shapes can be cut as desired. Sharp sharpness with a light touch. A clean cut surface and finish can be obtained. Since there is no v... Read MoreMaximum Output (W) (NE80)30 Cable Length (m) 3(US-15CB) Outer Dimensions, Width W x Depth D x Height H (mm) 150×250×120(NE80) Trusco Part No. 463-0751 Input power (V) (NE80)AC100 50/60Hz Vibrator Bolt tightening PZT type (US-15CB) Oscillation Frequency (kHz) 39.5(NE80)Discontinued
-
