Cutting edge setting and drill polishing can be done with one unit. All you have to do is set the drill on the chuck and slide it. You can polish the drill quickly and easily. One chuck can be used for both straight shaft and hexagon shaft drills. You can polish without being aware of the differe... Read More
Polishing angle (°) 118 Rated Time (minutes) 15 Main Unit Dimensions (mm) 175×130×85 Motor Rotation Speed (min -1 [rpm]) 18500 Rated Frequency (Hz) 50/60 Rated Power Consumption (W) 95 Mass (g) 980 Rated Voltage (V) AC100V (general household use) Included Accessories Chuck Offset Angle (°) Escape: 6
You can easily polish the tip of an ironworking drill by rotating the grindstone with your electric drill (neck diameter Φ43 mm). To use it, simply insert a drill through the hole at the top of the main body and twist it to polish it.
Ironworking drill (tip angle 118 °) for polishing
Achieves polishing with a drill diameter of 2.6 to 13 mm in a compact body. With a simple operation just by inserting it, you can perform X-thinning polishing with good bite and accurate holes. It takes about 2 minutes from setting to completion of polishing. It also supports long drills by fixin... Read More
Polishing angle (°) (Blade) 118 Continuous Operating Time (minutes) (Motor) 15 Rotation Speed at No Load (min-1[rpm]) (Motor) 18500 Rated Frequency (Hz) (Motor) 50/60 Rated Power Consumption (W) (Motor) 95 Clearance Angle (°) 10 Mass (g) 1900 Main Unit Dimensions (mm) 200×120×173 Motor Voltage (V) AC100 (for general household) Drill Thinning Shape X type
You can easily re-polish your ironworking drill. Although it is made of metal, it is relatively light at 9 kg, and because it is small, it does not take up space and is convenient to carry. The drill tip angle can be polished at any angle within 90 to 140 degrees. The polishing operation is simpl... Read More
Power Cable (m) 1.75 (removable from main unit) Rated Power Consumption (W) 200 External Dimensions (Depth D x Width W x Height H) (mm) 282×185×110 Rated usage time (minutes) 30 Rotation Speed at No Load (min-1[rpm]) 3700 Motor Rotation Speed (min -1 [rpm]) 5100 Mass (kg) 9.8 Power Input (V) AC100(50/60Hz) Motor Single-phase AC type (carbon brushless)
Even a blunt drill bit can be easily finished for professional use. The tip angle of the drill can be set to 118 ° and 135 °. The thinning process saves you the trouble of hitting the center punch. Drill bits from Φ2.5 mm to 19 mm can be polished in 60 seconds. The diamond grindstone sharply rest... Read More
Mass (kg) 1.6 Power (Single Phase / V) 100～120(50/60Hz) Motor 3.0amp 18000RPM Cutting Edge Shape Cross thinning standard processing Included Accessories Drill chuck (DDDA70100PF) Area for Processing (mm) Φ2.5～19
[Compatible with Φ2.6-14 drills! New accuracy to improve work!] Compatible with Φ14 drill diameters! The compact body supports drill polishing from Φ2.6 to 14 mm. Easy polishing! Easy polishing just by inserting. It takes about 2 minutes from setting to completion of polishing. Higher precision X... Read More
Polishing angle (°) (Blade) 118 Power Consumption (W) (Motor) 148 Rotation Speed at No Load (min-1[rpm]) (Motor) 18700 Continuous Operating Time (minutes) (Motor) 30 Rated Frequency (Hz) (Motor) 50/60 Clearance Angle (°) 10 Main Unit Dimensions (mm) 209×157×189 Mass (kg) 3.2 Power Input (V) AC100 (for general household) Drill Thinning Shape X type
A replacement whetstone for Doriken X14.
* Be sure to use a whetstone that matches the main body (due to the difference in internal structure, we do not support changes in the main body specifications due to changes in the whetstone).
A revolutionary drill grinding machine that automatically grinds the ideal conical angle of a drill
Drill Tip Angle (°) (Polishable) 118 Mass (kg) 1.9 Power Input (V) 100(50/60Hz) Main Unit Dimensions, Width W x Depth D x Height H (mm) 280×110×200 Rated usage time (minutes) 5 Power Consumption (W) 55 Rotational Speed (min -1 [rpm]) 9500 RoHS directive (corresponding to 10 substances) Correspondence
[Compatible with Φ2.6-14 drills! New accuracy to improve work!] Compatible with Φ14 drill diameters! The compact body supports drill polishing from Φ2.6 to 14 mm. Easy polishing! Easy polishing just by inserting. It takes about 2 minutes from setting to completion of polishing. Higher precision X... Read More
Polishing angle (°) (Blade) 135 Power Consumption (W) (Motor) 148 Rotation Speed at No Load (min-1[rpm]) (Motor) 18700 Continuous Operating Time (minutes) (Motor) 30 Rated Frequency (Hz) (Motor) 50/60 Clearance Angle (°) 10 Main Unit Dimensions (mm) 209×157×189 Mass (kg) 3.2 Power Input (V) AC100 (for general household) Drill Thinning Shape X type
(US patent) Anyone can easily install and polish by using a special chuck. The size of the cone to be sharpened is 2.5 mm to 13 mm. The cone shank (the root of the shaft) corresponds to the straight shank. Uses high quality electrodeposited diamond wheels. Ironworking cones High-speed, cobalt, an... Read More
Polishing size (mm) 2.5～13 Suitable Whetstone Electroplated diamond wheel Voltage (V) 100 Motor Rotation Speed (min -1 [rpm]) 15000
Since thinning can be taken, it is easy to drill holes in a hand drill!
Voltage (V), at 50 / 60Hz AC100 Included Accessories Collet x 5 pieces, collet holder x 1 set Mass (kg) About 2 Dimensions, Width W x Depth D x Height H (mm) 205×80×110 Trusco Part No. 481-6285 Suitable Whetstone Φ48 CBN#170 Tip Angle (°) 118 Drill Diameter (Φmm) 3.0～13.0 Drill Thinning Shape X thinning Rotational Speed (min -1 [rpm]) 7200 Motor Output (W) 100
Voltage (V), at 50 / 60Hz AC100 Motor Output (W) 65 Rotational Speed (min -1 [rpm]) 2850/3440 Tip Angle (°) 90～140 Drill Diameter (Φmm) 2.0～13.0 Suitable Whetstone CBN#170 Dimensions, Width W x Depth D x Height H (mm) 225×218×212 Drill Thinning Shape X thinning Trusco Part No. 481-5211 Mass (kg) 11
[Compatible with Φ10-20 drills! Middle size that can be sharpened at last!] Compatible with Φ10-20 drill diameters! The compact body supports drill polishing up to Φ10 to 20 mm. Higher precision X thinning! Emphasis is placed on drilling accuracy compared to conventional products. Achieves X-thin... Read More
Polishing angle (°) (Blade) 118 Power Consumption (W) (Motor) 148 Continuous Operating Time (minutes) (Motor) 30 Rated Frequency (Hz) (Motor) 50/60 Rotation Speed at No Load (min-1[rpm]) (Motor) 5000 Clearance Angle (°) 10 Main Unit Dimensions (mm) 263×185×203 Mass (kg) 5.5 Power Input (V) AC100 (for general household) Polishing size (mm) Straight shaft / hexagon shaft: 10 to 20 Drill Thinning Shape X type
It is mainly used when polishing the high-speed drill installed at the time of purchase. For plate screws
Re-polishing a drill that can no longer be cut
Hole Diameter (Φmm) 10 Thickness (mm) 12.7 Outer Diameter (Φmm) 44-50 RoHS directive (corresponding to 10 substances) Correspondence Suitable Model Drill sharpener (No.21200) Abrasive Materials High speed / super steel / titanium Abrasive Grain Size No. 80 Material WA whetstone
Rated Power Consumption (W) 130 Motor Rotation Speed (min -1 [rpm]) 20000 Mass (kg) 4.2 Motor Voltage (V) AC100 (for general household) Rated Frequency (Hz) (Motor) 50/60 Trusco Part No. 435-3005 Rated Time (minutes) (Motor) 15
Motor Rotation Speed (min -1 [rpm]) 20000 Mass (kg) 4.2 Motor Voltage (V) AC100 (for general household) Trusco Part No. 435-2980 Rated Frequency (Hz) (Motor) 50/60 Rated Power Consumption (W) 130 Rated Time (minutes) (Motor) 15
Easy X-thinning polishing of large-diameter drills! Compatible with large diameter drills up to 26 mm !! Supports X thinning polishing of large diameter drills up to 26 mm, which was not possible with conventional compact drill grinding machines. Easy polishing just by inserting !! Easy setting (... Read More
Rated Power Consumption (W) Motor: 750 Drill Thinning Shape X type Mass (kg) 26 Rated Time (minutes) (Motor) 15 Trusco Part No. 758-3818 Clearance Angle (°) 10 Rated Frequency (Hz) (Motor) 50/60 Main Unit Dimensions (mm) 352×348×365 Motor Rotation Speed (min -1 [rpm]) 3400 Motor Voltage (V) AC100 (for general household)
Complete in just 1-2 minutes! On-site, easy construction work! Speedy! Reliable! Polishing work can be done.
Suitable Drill Diameter (mm) Φ2.5～13 Cable Length (m) About 1.8 Drill Tip Angle (°) 118・135 Motor Rotation Speed (min -1 [rpm]) About 14000 Mass (kg) About 1.3 Power (Single Phase / V) 100(50/60Hz)
The bottom blade of a 2- or 4-flute end mill can be re-polished with a simple operation. High-precision polishing is possible in the range of Φ4.0 to Φ13.0.
For re-polishing the bottom blade of worn end mills
Power Cable (m) 1.9 motor rated time 15 minutes Number of Tips 2 blades, 4 blades Height (mm) 200 Length (mm) 220 Width (mm) 220 Polished surface size (mm) 4-13 (4 blades are 6.0-) Mass (kg) 4.8 Trusco Part No. 481-5165 Shank Diameter (Φmm) 4、6、8、10、12 Motor Rotation Speed (min -1 [rpm]) 5620 Output (W) 90 Power Input (V) Single phase 100 Shape [Bottom blade] Square
Compact and lightweight, it can be easily carried anywhere. Taper shank drill A wide range of grinding from 13 to 32 mm is possible.
Standard (Yamagata) grinding, candle grinding, single-character grinding, thinning type N type.
Power Input (V) AC100 Dimensions, Width W x Depth D x Height H (mm) 250×250×350 power (W) 250 Mass (kg) 35 Drill Tip Angle (°) 90～180・-5～-15 Power Cable (m) 1.6 Material (Whetstone) N5A grinding range (mm) 13～32 Trusco Part No. 138-1695 Wheel Diameter (Φmm) 180
Compact and lightweight, it can be easily carried anywhere. Chisel point molding is possible on candle-shaped drills, eliminating the need for punching and making it ideal for drilling thin plates. Ideal for regrinding plate pal drills (Mitsubishi Materials).
Standard (Yamagata) grinding, candle ... Read More
Trusco Part No. 138-1679 Drill Tip Angle (°) 118・130・180・-5・-15 Dimensions, Width W x Depth D x Height H (mm) 260×210×250 grinding range (mm) 2～13 Material (Whetstone) PA Power Input (V) AC100 Power Cable (m) 1.6 Wheel Diameter (Φmm) 125 Mass (kg) 17 power (W) 100
It can polish super steel drills and titanium coated drills as well as high speed drills. For plate screws
Re-polishing a drill that can no longer be cut
Hole Diameter (Φmm) 12.7 Thickness (mm) 13.7 Outer Diameter (Φmm) 44-50 RoHS directive (corresponding to 10 substances) Correspondence Material Diamond wheel Suitable Model Drill sharpener (No.21200) Abrasive Materials High speed / super steel / titanium Abrasive Grain Size No. 230
Rated Power Consumption (W) 130 Motor Rotation Speed (min -1 [rpm]) 20000 Rated Time (minutes) (Motor) 15 Motor Voltage (V) AC100 (for general household) Rated Frequency (Hz) (Motor) 50/60 Trusco Part No. 723-5593
Rated Power Consumption (W) 130 Rated Frequency (Hz) (Motor) 50/60 Motor Voltage (V) AC100 (for general household) Rated Time (minutes) (Motor) 15 Trusco Part No. 723-5607 Motor Rotation Speed (min -1 [rpm]) 20000
Supports overseas voltage
* This product is designed for overseas use, but it can also be used in Japan. * The plug shape of the outlet is A type (same as for domestic use). Since the plug shape differs from country to country overseas, it is necessary to prepare an adapter suitable for that coun... Read More
Rated Time (minutes) 15 Main Unit Dimensions (mm) 195×160×165 Polishing angle (°) 118 Offset Angle (°) Escape: 10 Rated Voltage (V) 220～240 Rated Frequency (Hz) 50/60 Motor Rotation Speed (min -1 [rpm]) 20000 Drill Thinning Shape X type Mass (kg) 2.6 Rated Power Consumption (W) 90
Compact and lightweight, it can be easily carried anywhere. N-type and X-type thinning grinding is possible.
Standard (Yamagata) grinding, candle grinding, single-character grinding, thinning type N type, thinning type X type (cross).
grinding range (mm) 2～13 Power Input (V) AC100 Material (Whetstone) CBN Mass (kg) 18 Wheel Diameter (Φmm) 125 Drill Tip Angle (°) 118・130・180・-5・-15 Dimensions, Width W x Depth D x Height H (mm) 240×260×300 Power Cable (m) 1.6 Trusco Part No. 138-1687 power (W) 100
Approximately 300 6.5 mm ironworking drills can be polished.
For polishing high-speed drills, cobalt drills, and titanium-coated drills
* Super steel drills and concrete drills cannot be polished.
Supports overseas voltage
* This product is designed for overseas use, but it can also be used in Japan. * The plug shape of the outlet is A type (same as for domestic use). Since the plug shape differs from country to country overseas, it is necessary to prepare an adapter suitable for that coun... Read More
Offset Angle (°) Escape: 10 Drill Thinning Shape X type Mass (kg) 2.6 Rated Voltage (V) 220～240 Polishing angle (°) 118 Main Unit Dimensions (mm) 195×160×165 Rated Power Consumption (W) 90 Rated Time (minutes) 15 Motor Rotation Speed (min -1 [rpm]) 20000 Rated Frequency (Hz) 50/60
S-shaped thinning drill grinding machine with excellent bite. Compatible with overseas voltages.
* Carbide drills / concrete drills cannot be polished. * This product is designed for overseas use, but it can also be used in Japan. * The plug shape of the outlet is A type (same as for domestic use... Read More
Drill Thinning Shape S type Motor Rotation Speed (min -1 [rpm]) 18500 Mass (kg) 1.2 Rated Power Consumption (W) (Motor) 95 Rated Frequency (Hz) (Motor) 50/60 Motor Voltage (V) 220～240 Rated Time (minutes) (Motor) 15 Main Unit Dimensions (mm) 195×116×175 Polishing angle (°) 118 Clearance Angle (°) 10
S-shaped thinning drill grinding machine with excellent bite. Compatible with overseas voltages.
* Carbide drills / concrete drills cannot be polished. * This product is designed for overseas use, but it can also be used in Japan. * The plug shape of the outlet is A type (same as for domestic use... Read More
Clearance Angle (°) 10 Drill Thinning Shape S type Rated Power Consumption (W) (Motor) 95 Mass (kg) 1.2 Motor Voltage (V) 220～240 Polishing angle (°) 118 Rated Frequency (Hz) (Motor) 50/60 Main Unit Dimensions (mm) 195×116×175 Rated Time (minutes) (Motor) 15 Motor Rotation Speed (min -1 [rpm]) 18500
Compact and lightweight, it can be easily carried anywhere. Accurate centering is possible with the V-shaped chuck.
Standard (Yamagata) grinding.
power (W) 60 Trusco Part No. 138-1661 grinding range (mm) 2～13 Type Dedicated for angle grinding Mass (kg) 9.8 Power Cable (m) 1.6 Material (Whetstone) PA Power Input (V) AC100 Drill Tip Angle (°) 118・130 Wheel Diameter (Φmm) 125 Dimensions, Width W x Depth D x Height H (mm) 260×140×220
Nishigaki Industrial Drill Research LaboratoryCutting edge setting and drill polishing can be done with one unit. All you have to do is set the drill on the chuck and slide it. You can polish the drill quickly and easily. One chuck can be used for both straight shaft and hexagon shaft drills. You can polish without being aware of the differe... Read MorePolishing angle (°) 118 Rated Time (minutes) 15 Main Unit Dimensions (mm) 175×130×85 Motor Rotation Speed (min -1 [rpm]) 18500 Rated Frequency (Hz) 50/60 Rated Power Consumption (W) 95 Mass (g) 980 Rated Voltage (V) AC100V (general household use) Included Accessories Chuck Offset Angle (°) Escape: 6
