Straight Grinders - Grinding - Corded Power Tools - Power Tools - Power & Hand Tools

BOSCH Straight grinder

A tool post type that can be attached to a lathe with an electronic continuously variable transmission mechanism. Maintains high-speed rotation even when a load is applied. Work efficiency is improved. Cutting, polishing and deburring of various materials.

Mass (kg) 1.6 Power Input (V) 100(50/60Hz) Rotational Speed (min ^-1 [rpm]) 10000～28000 Carbon Brush Nominal Number 1607014176 Cable Length (m) 2.5 Wheel Diameter (Φmm) 40 Trusco Part No. 424-9712 Power Consumption (W) 550 Collet diameter (Φmm) 6 (standard type), 3, 8 (available) Current (A) 7

from S$899.90

Shipping

Min. 4 days

MITACHI TOOLs Straight grinder

Ample 5.0A (100V). Φ6mm collet supports tip tools with various shafts. The internal grinding wheel can also be used with the grinding wheel shaft.

Mass (kg) 1.9 Cable Length (m) 2.7 Rotational Speed (min ^-1 [rpm]) 24000 Number of Cores 3 Wheel Outer Diameter (Φmm) 38 Overall Length (mm) 399 Trusco Part No. 479-7400 Power Consumption (W) 485 Current (A) 5 Collet diameter (Φmm) 6 Grip Diameter (Φmm) 63×60.5 Mounting shaft dimensions (diameter (screw pitch) x length L) (mm) M10 (1.5) × 19 (Whetstone axis) Voltage (V) Single phase 100

from S$389.90

Shipping

Min. 2 days

MITACHI TOOLs Straight grinder

Collet type, margin rating 5A, whetstone shaft (M10) included, double insulation Use of cutting, polishing and deburring of various materials. It is ideal for grinding at angles that are difficult with a disc grinder, such as removing beats generated by welding.

Voltage (V) 100 Number of Cores 2 Cable Length (m) 2.7 Rotational Speed (min ^-1 [rpm]) 24000 Wheel Outer Diameter (Φmm) 38 Power Consumption (W) 485 Current (A) 5 Maximum Operating Peripheral Speed (m / min) 50[3000] Collet diameter (Φmm) 6 Mounting shaft dimensions (diameter (screw pitch) x length L) (mm) M10 (1.5) × 19 (Whetstone axis) Motor Single phase series commutator motor Power Input (V) Single-phase 50 / 60Hz + shared

from S$349.90

Shipping

Min. 6 days

MITACHI TOOLs Electronic straight sander + continuously variable transmission

Straight sander that can be used at low speed. The electronically controlled motor makes it ideal for work in the low speed range. Arbitrary rotation speed can be set with stepless speed change. Maintains a constant rotation speed even under low-speed loads. Uses a soft start with a small reactio... Read More

Mass (kg) 2 Cable Length (m) 2.7 (2-core) Rotational Speed (min ^-1 [rpm]) 3500～9000 Current (A) 7.6 Maximum Peripheral Speed (m/s) 72 Power Consumption (W) 735 Grinding Wheel Dimension, Outer Diameter (mm) 80 (various tip tools) Power Input (V) Single phase 100

from S$689.90

Shipping

Min. 7 days

MITACHI TOOLs Straight polisher

With a rotation speed of 5600 min-1, it is ideal for stainless steel polishing and polishing work. Reliable double insulation specifications. Collet adapter standard equipment. Stainless steel shaving work with 100mm non-woven fabric wheel, flap wheel, cotton buff, sisal buff, etc.

Mass (kg) 1.9 Cable Length (m) 2.7 (2-core) Maximum Peripheral Speed (m/s) 38 Current (A) 4.5 Power Consumption (W) 435 Rotational Speed (min ^-1 [rpm]) 5600 Shaft dimensions (mm) M10(1.5)×38 Power Input (V) Single phase 100

from S$569.90

Shipping

Min. 7 days

MITACHI TOOLs Straight grinder

Φ6 collet type. An internal grindstone can also be used with the grindstone shaft (M10) accessory.

Rotational Speed (min ^-1 [rpm]) 24000 Wheel Diameter (Φmm) 38

from S$379.90

Shipping

Min. 2 days

MITACHI TOOLs Double insulated straight sander

The grindstone diameter can be used up to 125 mm, which is an exceptional application range. Guaranteed comfortable work with a rated 6A powerful motor. Reliable double insulation specifications.

Wheel Hole Diameter (Φmm) 12.7 Wheel Outer Diameter (Φmm) 125 Number of Cores 2 Cable Length (m) 2.7 Wheel Thickness (mm) 32 Mass (kg) 4.3 (excluding code) Rotational Speed (min ^-1 [rpm]) 4500 Power Consumption (W) 580 Current (A) 6 Trusco Part No. 776-7676 Voltage (V) Single phase 100 Motor Single phase series commutator motor Mounting shaft dimensions (diameter (screw pitch) x length L) (mm) Φ12.7(M12)×32

from S$789.90

Shipping

Min. 6 days

MITACHI TOOLs Straight Sander

Equipped with a newly developed powerful motor. Large diameter straight sander. Compatible with various tip tools. Tip tools with a maximum thickness of up to 30 mm can be attached. Lightweight, double insulation type. Various polishing work, iron / stainless steel welding, grinding / finishing o... Read More

Cable Length (m) 2.7 (2-core) Maximum Peripheral Speed (m/s) 30 Mass (kg) 4.3 Rotational Speed (min ^-1 [rpm]) 4500 Power Consumption (W) 580 Current (A) 6 Power Input (V) Single phase 100 Shaft dimensions (mm) Φ12.7(M12)×30

from S$749.90

Shipping

Min. 7 days

KTC Straight grinder

from S$229.90

Shipping

Min. 3 days

Leutor (NIHON SEIMITSU KIKAI KOSAKU) Straight grinder

A high torque hand grinder developed for high load tools such as flap foils. Because it is light and has high horsepower, the rotation does not drop, so you can finish it beautifully. It is also ideal for use with thick diameter whetstones.

Current (A) 6.8 Maximum torque (N.cm) 63.74 Rated Power Consumption (W) 650 Rotational Speed (min ^-1 [rpm]) 8500 Power Input (V) Single phase AC100 50 / 60Hz Wheel Outer Diameter (Φmm) Up to 48 Chucking Size (mm) Φ6、Φ8

from S$749.90

Shipping

Min. 4 days

MITACHI TOOLs Straight grinder

High speed straight grinder. Ample motor power.

Rotational Speed (min ^-1 [rpm]) 18000 Cable Length (m) 2.7 Number of Cores 3 Mass (kg) 3.1 Trusco Part No. 328-5570 Overall Length (mm) 548 Power Consumption (W) 580 Chucking Size (mm) 6 Current (A) 6 Wheel Outer Diameter (Φmm) 65 Voltage (V) Single phase 100

from S$599.90

Shipping

Min. 2 days

MITACHI TOOLs 2-speed straight sander (M10 screw type)

Compatible with tip tools with each shaft. * Tip tools are not included.

Power Consumption (W) (High speed) 380, (Low speed) 335 Current (A) (High speed) 4, (Low speed) 3.5 Rotational Speed (min ^-1 [rpm]) (High speed) 9000, (Low speed) 7000 Wheel Outer Diameter (Φmm) (Maximum) 48 Mass (kg) 2 Cable Length (m) 2.7 Number of Cores 3 Overall Length (mm) 428 Grip Diameter (Φmm) 64×61 Trusco Part No. 762-6312 Mounting shaft dimensions (diameter (screw pitch) x length L) (mm) M10(1.5)×38 Voltage (V) Single phase 100

from S$659.90

Shipping

Min. 2 days

MITACHI Large diameter straight sander

from S$799.90

Shipping

Min. 3 days

OFFICE MINE Electric slim grinder

Power Input (V) 100 50/60Hz Rotational Speed (min ^-1 [rpm]) 10000～6000 Cable Length (m) 2.4 Overall Length (mm) 273 Power Consumption (W) 350 Handle Diameter (Φmm) 51 Collet Size (mm) 6 Mass (g) 808 Trusco Part No. 819-2247 RoHS directive (corresponding to 10 substances) Correspondence

Discontinued

BOSCH Straight grinder

Tool post type that can be attached to a lathe Constant speed electronic continuously variable transmission * Tip tool sold separately

Rotational Speed (min ^-1 [rpm]) 12000～27000 Trusco Part No. 353-8061 Wheel Diameter (Φmm) 25 Cable Length (m) 2.5 Dimensions (Width W x Height H) (mm) 330×77 Collet diameter (Φmm) 6 (Standard type) Power Input (V) 100(50/60Hz) Mass (kg) 1.7 Power Consumption (W) 600

Discontinued

MITACHI TOOLs Continuously variable straight sander (M10 screw type)

Mass (kg) 2 Number of Cores 2 Cable Length (m) 2.7 Rotational Speed (min ^-1 [rpm]) 3500 to 9000 (continuously variable) Trusco Part No. 467-9750 Rated Current (A) 7.6 Power Consumption (W) 735 Voltage (V) Single phase 100

Discontinued

MITACHI TOOLs Mitachi straight grinder 38mm 200V

Discontinued

MITACHI TOOLs Straight grinder

It can be used with a grindstone diameter of up to 38 mm. It is a standard model used by many users. Reinforcing bar / steel frame construction company. Sheet metal and hardware contractor. Ironworks. Deburring. Rust removal. grinding. Polish.

Trusco Part No. 394-6819 Chucking Size (mm) 6 Overall Length (mm) 372 Wheel Outer Diameter (Φmm) 38 Mass (kg) 1.9 Rated Current (A) 5 Rotational Speed (min ^-1 [rpm]) 24000 Cable Length (m) 2.7 Voltage (V) AC100 Power Consumption (W) 485

Discontinued

MITACHI TOOLs Straight grinder

For grinding, it is especially convenient for narrow grinding such as deburring work of various dies and castings with resinoid internal grindstone, grindstone with shaft and carbide rotary bar.

Wheel Outer Diameter (Φmm) Internal maximum 38 Current (A) 4.0 Rotational Speed (min ^-1 [rpm]) 23000 Voltage (V) AC100 Grip Diameter (Φmm) 63 Overall Length (mm) 363 Power Consumption (W) 380 Mass (kg) 1.9

Discontinued

MITACHI TOOLs Straight grinder

Since the head is extended long, grindstones and other advanced tools can be used even in narrow spaces, and it is easy to grind the inner surface of tools and machine parts that are particularly difficult to work with an angle grinder. Various polishing work Grinding and polishing of various mol... Read More

Overall Length (mm) 372 Rotational Speed (min ^-1 [rpm]) 24000 Wheel Shaft (mm) 10×19 Trusco Part No. 342-8311 Mass (kg) 1.9 Number of Cores 3 Rated Current (A) 5.0 Wheel Outer Diameter (Φmm) 38 Grip Diameter (Φmm) 63×60.5 Voltage (V) Single phase 100 Collet diameter (Φmm) 6 Power Consumption (W) 485 Cable Length (m) 3.5

Discontinued

MITACHI TOOLs Straight grinder SGS38SX

Low speed, high speed 2-speed type

Voltage (V) 100 (Single-phase AC 50 / 60Hz) Maximum Operating Peripheral Speed (m / min) 50[3000] Rated Current (A) (High speed / Low speed) 4 / 3.5 Number of Cores 3 Mass (kg) 2 (excluding code) Trusco Part No. 209-8415 Carbon Brush Nominal Number CB1003 Motor Single phase series commutator motor Power Consumption (W) (High speed / Low speed) 380/335 Cable Length (m) 2.7

Discontinued

MITACHI TOOLs Straight grinder

Double insulation model !! Margin 5.0A (100V) Φ6mm collet supports tip tools with various shafts. Internal toys can also be used with toys shafts.

Wheel Shaft (mm) 10×19 Voltage (V) Single phase 100 Rotational Speed (min ^-1 [rpm]) 24000 Rated Current (A) 5.0 Grip Diameter (Φmm) 63×60.5 Cable Length (m) 2.7 Power Consumption (W) 485 Collet diameter (Φmm) 6 Number of Cores 2 Mass (kg) 1.8 Wheel Outer Diameter (Φmm) 38

Rating:

100%

(2)

Discontinued

MITACHI TOOLs Continuously variable speed straight sander (Collet type)

Number of Cores 2 Cable Length (m) 2.7 Rotational Speed (min ^-1 [rpm]) 3500 to 9000 (continuously variable) Trusco Part No. 467-9857 Rated Current (A) 7.6 Power Consumption (W) 735 Voltage (V) Single phase 100

Discontinued

BOSCH Electronic straight grinder

6mm collet check kickback prevention mechanism constant speed

Collet diameter (Φmm) 6

Discontinued

MITACHI TOOLs 2-speed straight grinder 38mm

It is a 2-speed type with low speed and high speed. Grindstone diameter up to 48mm can be used. Grinding and polishing.

Rotational Speed (min ^-1 [rpm]) (High speed) 9000, (Low speed) 7000 Power Consumption (W) (High speed) 380, (Low speed) 335 Voltage (V) Single phase 100 Wheel Outer Diameter (Φmm) 48 Overall Length (mm) 365 Cable Length (m) 2.7 Trusco Part No. 209-8415 Mass (kg) 2 Rated Current (A) 4A (at high speed), 3.5A (at low speed)

Discontinued