Power Tools
A power tool is a tool equipped with an electric motor that processes metal and concrete. Used for cutting tiles and bricks, polishing metal, and tightening screws. The feature is that the work can be done faster than a manually moved tool. There are disc grinders that are equipped with an auxiliary handle and do not get tired even if you continue to work for a long time, impact drivers with strong screw tightening, impact drivers with LED lights, etc. You can choose according to the work contents.
Other Related Pages
STAR Light Super Soft Extension CordIt does not harden even in winter and has excellent cold resistance.Cable Size (mm2) 1.25 Current Capacity (A) 15- TAIKATSU 2.0SQ thick extension cord (cross)Since VCTF 2.0mm 2 x 2 cores are used for the wires, a total of up to 1500W can be used.Rated Current (A) 15 Cable Specification, Number of Cores 2 Wire Specification-Thickness (mm2) 2 Number of Outlets 3 Cable Specification, Type VCTF
- VESSEL Electric Ball Grip ScrewdriverA new style of hand tools that assists with electric power. Fast tightening is with an electric motor, and final tightening is like a manual screwdriver. With high brightness LED light. Equipped with a USB rechargeable Li-ion battery (3.6V-800mAh). Supports 6.35 mm bits on the opposite side of th... Read MoreRotation Speed at No Load (min-1[rpm]) (Maximum) 280 Continuous Operating Time (minutes) (Unloaded) Approx. 40 Battery Capacity (Ah) 0.8 Mass (g) 160 (excluding accessories) Voltage (V) 3.6 Charge / discharge count (times) About 500 Charging Time (minutes) About 60 Output Charger: 5V_1A Applicable battery Li-ion_3.6V Charging Method Micro_USB-typeB_USB charging
- HATAYA Sunday Rainbow Reel [Outdoor grounding]An outdoor cord reel that is safe even in a downpour. It is even safer with a ground. Rainproof 4-port outlet. Two rows of W outlets are integrally molded in parallel. There is no ingress of water or dust into the internal wiring. One-piece frame. Hataya's original molded frame that is stable... Read MoreCable Size (mm2) 1.25 Rating of Outlet 2P ・ 15A ・ 125V with ground Cable Specification, Number of Cores 3C Number of Outlets 4 (3 cores) Outlet Type Bipolar grounding Where to Use Outdoors Feature Rainproof, with earth Cable Specification, Type VCT
- NPLACE Ball type electric screwdriver USB rechargeable LED light with double-headed bitA USB rechargeable electric screwdriver that can be easily tightened with an electric motor for quick tightening and as if it were a manual screwdriver. USB rechargeable (USB Micro 5pin). Battery charging lamp: Lights red during charging and lights green after charging is complete. It can also be... Read MoreMass (g) 160 Rotation Speed (min-1[rpm]) 280 Voltage (V) 3.6 Operation Time (minutes) 40 Chuck (mm) 6.35 USB Cable (m) Approximately 1 (no energizing function) Terminal USB/micro USB
- Panasonic Charging mini driver + miniQu (minic)Ideal for tightening machine screws. Pursuing torque and speed that are perfect for tightening machine screws. With a brake that stops when you want to stop. Charging is automatically stopped when the amount of charge reaches the appropriate level. The weak point of lithium-ion batteries is that ... Read MoreBattery Capacity (Ah) 0.85 Length (mm) 128 Mass (g) 165 Rotation speed (times / min) 230 Voltage (V) 3.7 Width (mm) 42 Height (mm) 45 Type of Terminal microUSB B type x 1 (DC 5V)
- MonotaRO Rechargeable Drill Driver 18V Main Unit OnlySpeed adjustment can be adjusted in 2 steps. The tightening torque can be adjusted in 19 steps. For drilling holes in wood, resin, and iron plates * To use this product, you will need a separate 18V battery charger with order code 46745957 and an 18V battery pack with order code 46745966 or order... Read MoreChucking Size (mm) 0.8～10 Mass (kg) 1 Maximum Torque (Nm) 35 Applicable battery Lithium ion battery (MOKBP-2.0Li) Series Monotaro 18V Li-ion Battery Series Material (Main Unit) Nylon
- HAKKO Polystyrene cutterWith 100V power supply specifications, thick styrene can be cut continuously (thickness: 110mm, depth: 170mm). With a turbo switch, hard styrol can be easily cut. Energizing lamp display to notify of heat generation. By adopting an auto safety switch, heat is generated only while the switch is pr... Read MoreTrusco Part No. 367-8814 Mass (g) 410 (including code) Power Consumption (W) 6 Power Supply AC100V 50/60Hz heater temperature (℃) Normal: 170, Turbo: 250 Effective Cutting Capacity (mm) Thickness / 110, Depth / 170
- EARTH MAN Hobby router set 86PCSOne-push easy bit replacement with a shaft lock mechanism and no tools required. With stepless speed control, adjust the dial to your liking. For engraving, precision polishing, glass work, etc.Input (Adapter) AC100V Rated usage time (minutes) 10 Power Consumption (W) 12 Battery Voltage (V) 14 Chucking Size (mm) 2.35 Input capacity 5.6W Frequency (Hz) 50/60 Cable Length (m) About 1.6 Rotation Speed at No Load (min-1[rpm]) About 6,000-13000 Voltage (V) DC14 Output DC14V0.4A Main Unit HRT-12A
- STAR Light Rainproof extension cordUses a soft type cable with excellent rain and cold resistanceCable Size (mm2) 1.25 Rated Voltage (V) 125 Rated Current (A) 15 Current Capacity (A) 15 Rated Power (W) 1500 Cable Specification, Number of Cores 2 Outlet Specification 2P・15A・125V Color Black Number of Outlets Mouthful Where to Use Outdoors Feature Rain protection Material VCT Cable Specification, Type VCT
- STAR ELECTRIC MANUFACTURING (SUZUKID) Three-phase Benly TapYou can operate multiple machines at the same time. Since the tap body has a hanging bracket, it can be easily mounted on a wall, pillar, etc. Dryer, fir miller, rice milling machine Temporary workshop for agriculture, exhibition hall, factory, etc. * Do not use in places exposed to rainwater, oi... Read MoreDimensions, Width W x Height H x Length L (mm) 72×55×270 Rated Current (A) 20 Cable Size (mm2) 3.5 Cable Length (m) About 1 Number of Outlets 3 Rated Voltage (V) 250
- Nishigaki Industrial Drill Research LaboratoryCutting edge setting and drill polishing can be done with one unit. All you have to do is set the drill on the chuck and slide it. You can polish the drill quickly and easily. One chuck can be used for both straight shaft and hexagon shaft drills. You can polish without being aware of the differe... Read MoreMotor Rotation Speed (min -1 [rpm]) 18500 Offset Angle (°) Escape: 6 Main Unit Dimensions (mm) 175x130x85 Mass (g) 980 Rated Frequency (Hz) 50/60 Rated Power Consumption (W) 95 Polishing angle (°) 118 Included Accessories Chuck Rated Time (minutes) 15 Rated Voltage (V) AC100V (general household use)
- MonotaRO Rechargeable impact wrench 18V brushless type body onlyA rechargeable impact wrench that uses a brushless motor and has a maximum torque of 220 Nm. Since the LED lights up during operation, it is easy to see the work at hand. For tightening and removing wheel nuts when changing passenger car tires * To use this product, you will need a separate 18V b... Read MoreMass (kg) 0.99 Rotational Speed (min -1 [rpm]) 0～2300 Number ofImpact (min -1 [times / min]) 0～3400 Square Drive Size 12.7 Length (mm) 152 Height (mm) 218 Width (mm) 80 (when the belt buckle is attached) Tightening Capacity (High Tension Bolt) M10 ～ M16 Tightening Capacity (Standard Bolt) M10 ～ M20 Series Monotaro 18V Li-ion Battery Series Material (Main Unit) Nylon
- MonotaRO For rechargeable reciprocating saw 18V onlyEasy-to-manage rechargeable electric reciprocating saw. Various materials are cut and it comes with two types of blades. For cutting wood, resin, and iron plates * To use this product, you will need a separate 18V battery charger with order code 46745957 and an 18V battery pack with order code 46... Read MoreStroke number (min -1 ) 0～3000 Included Accessories 1 woodworking blade, 1 metal blade Mass (kg) 1.43 Stroke width (mm) 15 Main Unit Dimensions, Length L x Height H x Width W (mm) 318×185×72 Series Monotaro 18V Li-ion Battery Series Material (Main Unit) Nylon
- MonotaRO Cordless Impact Driver 18V Main Unit OnlyAlthough it is lightweight and compact, it exerts powerful power at 18V. Work efficiency is improved by adopting a lithium-ion battery. When you pull the trigger, the light turns on, making it easy and convenient to work. The direction of rotation can be switched by operating the left / right rev... Read MoreRotational Speed (min -1 [rpm]) 0～2600 Number ofImpact (min -1 [times / min]) 0～3400 Maximum Torque (Nm) 110 Main Unit Dimensions, Length L x Height H x Width W (mm) 154×198×82 Bit Size (mm) 6.35 Hex axis Mass (g) 860 Screw Tightening Capacity (mm) M4～M8 Screw tightening capacity (mm) High strength bolt M5～M12 Screw tightening capacity (mm) Bolt M5～M14 Series Monotaro 18V Li-ion Battery Series
- TRUSCO 2 pcs Bushing for Diamond CutterA ring that converts Φ20mm for diamond cutters to Φ15mm. For diamond cutters.Trusco Part No. 409-7637 Mass (g) 21
- PROMOTE Multi router setWith this set, any precision machining is OK. With flexible shaft convenient for precision machiningRated Current (A) 1.3 Rated Voltage (V) 100 Power Consumption (W) 130 Cable Length (m) 2 Mass (kg/set) 2.15 (including case) Bulb Length (mm) 230 Body Diameter (mm) 58 Mass of Main Unit (g) 640 (including code) Rotational speed (min -1 [times / min]) 8000-30000 (stepless speed change) Type of Insulation Double insulation structure
- HAKKO Polystyrene CutterIt's battery-powered, so you can carry it around and work anywhere. The slender grip that fits your hand is designed to be easy for women and children to use. Energizing lamp display to notify of heat generation. By adopting an auto safety switch, heat is generated only while the switch is pr... Read MoreEffective Cutting Capacity (mm) Thickness / 70, Depth / 130 Set Contents Body, 2 heaters (No.A1510) Trusco Part No. 367-8393 Mass (g) 110 (excluding batteries)
- EARTH MAN EARTH MAN S-Link 14.4V charging sawWith continuously variable transmission brake For cutting wood / branches, for cutting PVC / plastic / bamboo, for cutting general metals * Batteries and chargers are sold separately.Motor Voltage (V) DC14.4 Stroke (mm) About 13 Dimensions (Length L x Width W x Height H) (mm) About 335 × 65 × 170 Battery Voltage (V) 14.4 Mass (kg) About 1 Maximum cutting thickness (mm) Wood: about 55, soft iron: about 2 Number of strokes (min-1 [times/min]) About 0-2300 (stepless speed change)
- KYOCERA Fine SharpenerSharpen with the power of sonic vibration. A new type of sharpener was born from Kyocera. Sharp! Quick! Easy! Uses a fine ceramic whetstone. As it is a compact handy type, it can be used for various purposes. Sharp sharpness is revived with a small number of sharpenings. Electric sharpener (for m... Read MoreMass (g) 135 Power Supply 2 AA alkaline batteries (not included) Dimension (mm) 38×202×57 Specification Battery operated
- wolfcraft Drill GuideAccurate drilling work that cannot be done by freehand is possible. Can also drill holes in round bars. Stable with non-slip rubber.Size (mm) (Drill size) 4, 5, 6, 8, 10
-
- EARTH MAN Mini SanderOne-handed size makes it easy to handle even for women with small hands. For surface finishing and chamfering of woodCurrent (A) 1.9 Rated Power Consumption (W) 180 Rated Time (minutes) 30 Frequency (Hz) 50/60 Voltage (V) AC100 Mass (kg) About 1.1 Pad size (mm) About 115 × 106 Paper Size (mm) About 115 × 145 Rotation Speed at No Load (min-1[rpm]) About 13000 Cable Length (m) About 2 Noise Level (dB) Approx. 87 / m
- PROXXON Mini router set (with transformer)A 12V type mini router that reduces the burden on the motor. The design has also been redesigned and equipped with a rubber grip. A dedicated power transformer is also included. Glass engraving, general engraving, metal engraving, model workTransformer (Power supply) AC100V → DC12V 1.0A Rated usage time (minutes) 15 Chuck Diameter (Φmm) 2.35/3.0 Power Consumption (W) 20 Mass (g) 250 (not including transformer) Dimensions, Diameter x Length L (Φmm x mm) 33.5 × 210 (router body) Power Input (V) DC12
- Panasonic Battery Packs (Nickel Metal Hydride Battery)* Charger is not includedBattery Voltage (V) 12 Battery Nickel metal hydride battery Trusco Part No. 395-0263 Type N type Mass (g) 710 Battery Capacity (Ah) 2.8
- EARTH MAN AC100V drill and screwdriverScrew Tightening Capacity (mm), Wood screw Φ3.2×38 Chucking Size (mm) 0.8～10 Power Consumption (W) 70
- PROXXON Mini router MM100 (main unit only)Two bearings are attached to the tip that has been processed with high precision (made of aluminum). Equipped with a rubber ring to improve work feeling. Easy-to-operate speed control adjusts to any number of revolutions. Uses a DC100V motor. Glass engraving, general engraving, metal engraving, etc.Power Input (V) 100(50/60Hz) Rated usage time (minutes) 15 Chuck Diameter (Φmm) 2.35/3.0 Dimension (mm) 230 (length) x Φ35 (thickness) Mass (g) 260 Power Consumption (W) 35 Included Accessories For collet chuck Φ2.35 / 3.0mm, spanner
- EIGERTOOL Cutting machine safety coverIt is foldable and can be easily stored without taking up space. Novice one-touch type for easy assembly. The material is chrome-free (fingerprint resistant coating), so it is durable and durable. It is a safety cover to prevent sparks from flying and igniting other products or melting nylon viny... Read MoreMass (kg) 4.8 Material Galvanized steel sheet Dimensions when Folded (mm) 650×355×50 Dimensions, when Assembled (mm) 650×355×510(H)
- REXON Small Drilling MachineEquipped as standard with a depth scale that is compact, space-saving, and convenient for repeated drilling. A desktop and compact drilling machine with a built-in stepless speed change controller that can cover a wide range of applications from woodworking to metalworking. Vise and drill chuck a... Read MoreGripping Diameter (Φmm) 1.5～10.0 Rated Voltage (V) 100 Vise Height (mm) 15 Table Dimensions (mm) 172×188 Installation Dimensions, Width W x Depth D (mm) 180×255 Main Unit Dimensions, Width W x Depth D x Height H (mm) 180×275×410 Drilling Capacity, to Wood (mm) 1～10 Rated Power Consumption (W) 200 Jaw Opening (mm) 48 Rated Frequency (Hz) 50/60 Vise Width (mm) 65 Mass (kg) 7 Rotation Speed (min-1[rpm]) Continuously variable speed: 3200-6200 Spindle Taper JT-1 Drilling Capacity, to Steel (mm) Metalwork: 1 to 6.5 Table Type Square Specification Worktable dimensions / W172 × D188mm
- Panasonic Charging stick impact driver 7.2VEquipped with a 2WAY LED light that brightly supports work in dark and narrow places. [Spot LED] Since it can illuminate up to about 2 m away, it is convenient for checking under the floor or under the ceiling. It can be used as a simple light. The large Φ5mm LED has a brightness of about 30lx (... Read MoreBattery Capacity (Ah) 1.5 Battery Voltage (V) 7.2 Battery Lithium ion (LA type)
- No Brand Cable ClampEasy adjustment according to the cord size. For binding cords.Material Polycarbonate, ABS
- RELIEF Mini router kitWith stepless speed adjustment function. Comes with 19 abundant accessory parts that can be used immediately. Because it is small and lightweight, you can work as if you were holding a pen.Cable Length (m) 0.96 Power Consumption (W) 10 Rated usage time (minutes) 15 Mass (g) 165 (including code) Rotation Speed at No Load (min-1[rpm]) 3000～12000 Power Input (V) AC100 50/60Hz Type of Insulation Double insulation Chucking Size (mm) Φ0.3～3.2
- MonotaRO For rechargeable LED work light 18V onlyThe head and sides are lit, and the head is a convenient work light that can rotate 360 °. It is possible to switch between 5 types of lighting: head part only, side side only, head part + side lighting, head part + side red blinking, side side red blinking. For production line maintenance, autom... Read MoreMass (kg) 0.26 Main Unit Dimensions, Length L x Height H x Width W (mm) 98 x 210 x 81 (including buckle) Luminous Flux (Lm) Head: 200, Side: 200, Flashing: 30 Light distribution angle (°) Head: 80, Side: 170 Color rendering index (Ra) Head: 80, Side: 80, Flashing: 60 Series Monotaro 18V Li-ion Battery Series Material (Main Unit) Resin + rubber grip
- Okada Hardware Mfg. (Z-Saw) Zetso Multi for cuttingCell Spacing (mm) 1.75 Band Width (mm) 0.6 Height (mm) 96 Size (mm) 33 Length (mm) 6 Mass (g) 22 Saw thickness (mm) 0.6 Specification Holder mounting part: Fine Blade Zetso
- THANKO (Electronics) Easy replacement of wheels, high torque 280Nm "Rechargeable electric impact wrench"High torque 280N though it is wireless. You can easily change tires even on a wagon car. High torque 280N though it is wireless. You can easily change tires even on a wagon car. * Be sure to use an outlet with a capacity higher than the rated value of the charger. * When using, pay attention to t... Read MoreRecharging Time (hours) (Battery) 1 hour Battery Capacity (Ah) (Battery) 1.5Ah Voltage (V) (Battery) 18V Power Consumption (Wh) (Battery) 27 Operating time (min) (Battery) Approx. 35 Rated Input Voltage (V) (Charger) 100-240 Rated Output Voltage (V) (Charger) 21 Rated Power Consumption (W) (Charger) 36 Rated Frequency (Hz) (Charger) 50/60 Rotational Speed (min -1 [rpm]) 0～2200 Warranty Period 12 months Square Drive (mm) 12.7 Mass (g) 1833 (including battery) Height (mm) 235 Length (mm) 240 Width (mm) 62 Rated input Capacity (charger): 0.6 Rated Output Capacity (charger): 1.5A Battery lithium ion
- PROXXON Mini router MM20Small high speed mini router It can be used for various purposes such as glass engraving.Power Input (V) 100(50/60Hz) Power Consumption (W) 15 Rated usage time (minutes) 15 Chuck Diameter (Φmm) 2.35 Mass (g) 150 Rotational Speed (min -1 [rpm]) 16500 Length (mm) 195
- EARTH MAN High torque mini routerHigh torque type (about twice that of R-5) improves work efficiency. Built-in micro bearing. With stepless speed control. Comes with "Glass Engraving Guide". Comes with a durable and light aluminum hard case. For hobby, general engraving, precision work, and glass engraving. Work easily... Read MoreRated Time (minutes) 15 Chucking Size (mm) 0.3～3.2 Output Current (mA) 750 Set Contents With 5 tip tools Input Voltage (V) DC18 Output Voltage (V) DC18 Cable Length (m) About 1.8 Rotational Speed (min -1 [rpm]) About 4000-18000 Power adapter AC100V、50/60Hz
- SHINKO (Shinko MechatroTech) Homes CutterIt is an electric and water polishing type blade polishing machine. With forward / reverse rotation switch, water splash prevention cushion cover, and simple blade guide. For sharpening knives such as fleas, planes, chisel, various factories, and small knives in the workplace.Wheel Hole Diameter (Φmm) 70 Cable Length (m) 1.85 Current Consumption (A) 1.3 Power Consumption (W) 125 Mass (kg) 5 Rotation Speed [50/60Hz] (min -1 [rpm]) 400/470 Power Input (V) 100 Frequency (Hz) 50/60 Wheel Thickness (mm) 20 Wheel Outer Diameter (Φmm) 180
- REXON Small drilling machine DP2000RA desktop drilling machine that is a high-end model of the small drilling machine DP2250R. Jacob taper No. 6 is used for the spindle, and a drill chuck that can handle Φ13.0 mm drill bits can be used. The spindle speed can be adjusted in 5 steps of 515/915/1430/1950/2580min -1 at 50Hz according t... Read MoreGripping Diameter (Φmm) 1.5～13 Rated Voltage (V) 100 Drilling Capacity, to Wood (mm) 13 Drilling Capacity, to Steel (mm) 13 Table Dimensions (mm) 183×180 Mass (kg) 19 Vise Height (mm) 22 Rated Power Consumption (W) 249 Installation Dimensions, Width W x Depth D (mm) 308×201 Rated Frequency (Hz) 50/60 Vise Width (mm) 83 Jaw Opening (mm) 84 Spindle Taper JT-6 Table Type Square Chuck (mm) Up to 220
- EARTH MAN Belt SanderOptimal for polishing and grinding of wide flat surfaces with high polishing ability. With auxiliary grip that is easy to hold. Comes with a dust pack to prevent the scattering of grinding powder. Also for polishing kiwa. For polishing the surface of wood, for removing paint, and for polishing sm... Read MoreDimensions (H x W x D) (mm) (Body) 140 x 150 x 265 Belt Speed (m/min) 220 Rated Time (minutes) 30 Belt Length (mm) 457 Frequency (Hz) 50/60 Power Consumption (W) 680 Current (A) 7.1 Belt Width (mm) 76 Power Input (V) AC100 Cable Length (m) About 2 Mass of Main Unit (kg) About 2.4 Rotational Speed (min -1 [rpm]) About 28000 Belt Speed (m/s) About 3.6 Belt Width W x Length L (mm) About 76 × 457
![Sunday Rainbow Reel [Outdoor grounding]](https://jp.images-monotaro.com/Monotaro3/pi/middle/mono35094841-100607-02.jpg)
