Hand Planes
A planer is a carpenter's tool used to smoothen the surface of wood. There are many types of typical flat planes, from those that finish large surfaces such as the surface of thick pillars to mini planes that are used for wood ends, handicrafts, and chamfering. In addition to flat surfaces, it is possible to use a variety of lineups such as anti-planes for finishing large curved surfaces, edge planes for inside corners, and ones for finishing grooves on thresholds. Beginners can easily use the replaceable blade type, which does not require difficult work such as sharpening the blade or adjusting the presser foot. We also carry a variety of replacement blades. For those who use a full-fledged planer, a planer is necessary to adjust the lower end of the planer. This category also includes board planes used for gypsum board wood ends and chamfering.
Other Related Pages
Kakuri Kakuri Blade Replaceable Type Hand Planes for HobbyIt has a sharp sharpness and can be used for detailed work. A convenient plane that can be used by pushing or pulling. It can also be used for gypsum board.Blade Width (mm) 22 Main Unit Dimensions (mm) 28×90 Mass (g) 70 Material (Blade) SK-5 Material (Main Unit) Steel- Kakuri Mini Hand PlaneComes with a main blade hand-finished by a craftsman. The table uses domestic oak wood that has been naturally dried. The surface of boards and square lumber can be finished smoothly. For surface finishing of boards and square lumber.Material (Shorter Rule) Oak Blade Width (mm) 42 Material (Blade) Carbon steel for cutting tools
- H2 Hobby planeIdeal for woodworking. Compact size that can be used easily. For chamfering and flat surface cutting.
- Umebachi Ryoma Zaiku Rabbet PlaneA plane suitable for cutting grooves such as sill. It is used when cutting the sill and the groove of the lintel. For work.Height (mm) 180
- Kakuri TOSHIZO Blade Replaceable PlanePatented one-touch replaceable blade type. There is no need for troublesome blade sharpening, and there is no need to adjust the presser foot. The surface of boards and square lumber can be finished smoothly. For surface finishing of boards and square lumber.Material (Shorter Rule) Oak Material (Blade) Carbon steel for cutting tools
- Kakuri Kakuri Ebony Small Plane Flat No.1A screw-type plane for work that makes it easy to adjust the blade. A plane with a width of 18 mm that can be used when cutting a flat surface. It is small and easy to hold, and the ebony material gives it a luxurious feel. It is for work that is ideal for detailed work using ebony as the materia... Read MoreBlade Width (mm) 18 Material (Blade) Heiss Material (Shorter Rule) Kurodan Case Polypropylene Included Accessories Storage case
- Horai StraightenerRepairing the whetstone ... "Anytime, anywhere" "Natural whetstone or artificial whetstone" is OK! Rough / medium whetstone / medium finish / finishing whetstone / natural / artificial whetstone can be easily repaired with paper.Size (mm) 100×400 Mass (g) 1700 Dimension (mm) 410×105×55
-
-
- Daigoro Bean edge plane + rightIn the inner corner of the corner. A right plane that is convenient for scraping the bottom left corner because it is used with the right hand. For stepping finish of edges and kiwa.Blade Width (mm) 30 Mass (g) 211 Overall Length (mm) 182from S$48.99Min. 6 days
-
-
- Kawayoshi Replacement Blade for Replaceable Blade Type PlaneType Spare blade
- Kawayoshi Replaceable Blade Type PlaneNo matter who uses it, you can get the sharpness and luster of a master carpenter. If it stops cutting, just replace the blade and it will return to its original sharpness. Replacing the blade will improve work efficiency. Since there is no need for a grind, it is easier to use than conventional ... Read MoreIncluded Accessories 3 replacement blades
- Kakuri TOSHIZO Replacement Blade of Blade Replaceable PlanePatented one-touch replaceable blade type. There is no need for troublesome blade sharpening, and there is no need to adjust the presser foot. The surface of boards and square lumber can be finished smoothly. For surface finishing of boards and square lumber.Material (Blade) Carbon steel for cutting tools
- Kakuri Kakuteri spare blade hobby bowl spare bladeSpare blade type Hobby plane dedicated blade.Blade Width (mm) 27 Material (Blade) SK-5
- Tajima (TJM DESIGN) Board cannaDurable aluminum die-cast body The adjustment plate mechanism cutter that allows you to select the chamfer width in 4 steps is a cutter blade with a mounting angle of 30 ° that can use a large spare blade. 1.5 times sharper than 60 ° products Slippery fluorine coating processing Easy-to-grip roun... Read More
- Takagi Marking Gauge with ScrewScrew type that makes it easy to adjust the marking width. For marking the processing line along the side of the work piece.from S$19.99Min. 2 days
- Kakuri Kakuri Ebony Small Plane Angled Corner No.5A screw-type plane for work that makes it easy to adjust the blade. A crafting plane that can be used when taking a 45 degree surface at a corner. It is small and easy to hold, and the ebony material gives it a luxurious feel. It is for work that is ideal for detailed work using ebony as the mate... Read MoreOffset Angle (°) 45 Material (Blade) Heiss Material (Shorter Rule) Kurodan Case Polypropylene Included Accessories Storage case
- Umebachi Ryoma Saiku Flat Hand PlaneA plane suitable for scraping flat surfaces. It is used when cutting a flat surface, a wood end, or a surface. For work.Width (mm) 55 Blade Width (mm) 42
- GISUKE (Takagi) Small Rabbet PlaneCut the sill and the ditch of the lintel.
- Kakuri No-mark Sashiri KannaShikii for fittings, etc. It can be used for digging a ditch in a lintel.Length (mm) 210 Material (Shorter Rule) Oak Width (mm) 50 Cutting Width (mm) 18 Material (Blade) Carbon steel for cutting tools Mass (g) 230 Height (mm) 60(30)
- Kakuri No mark Waki KannaSuitable for finishing stepped edges and edges of fittings, etc.Material (Shorter Rule) Oak Cutting Width (mm) 12 Height (mm) 60(30) Width (mm) 50 Mass (g) 300 Material (Blade) Carbon steel for cutting tools Length (mm) 205
- INOUE (Inouekougu) Chamfered CannaDial type blade adjustmentSize (mm) 140×35×20 RoHS directive (corresponding to 10 substances) Correspondence Material With polycarbonate glassfrom S$24.99Min. 2 days
- Mikiju Daikichi Japanese Hand PlaneThe surface of the wood is scraped and processed. A plane with steel that makes it easy to sharpen the blade. With steel. Shaving of the wood surface.Height (mm) 260 Mass (g) 800 Length (mm) 67 Blade Width (mm) 58 Width (mm) 70
- Umebachi Ryoma Zaiku Square Convex Bottom PlaneIt is used when cutting a large curved surface. For work * The cutting edge is sharp, so do not touch it with your bare hands. * Do not use for anything other than its intended purpose (wood).Mass (g) 94 Blade Width (mm) 24 Width (mm) 36 Length (mm) 120 Height (mm) 35
- Tenshin 4-sided Kanna spare bladeOverall Length (mm) - Blade Width (mm) 58 Suitable for Four-sided Canna (58) Specification Four-sided replacement blade type Product Name / Specification Spare blade
- Takagi Mortise gaugeTwo blades that can draw two lines at the same time. For marking the processing line along the side of the work piece. For marking inside holes.
- Tajima (TJM DESIGN) Ceramic spare blade for hard chamfering cannaCeramic spare blade for chamfering plane Chamfering cutter for gypsum board Ceramic replacement blade * Because it is a knife, please handle it with care. * Please dispose of the bent blade after use. * Product specifications are subject to change without notice. Please note.Suitable for TMK-KV45、TMK-KH45from S$13.99Min. 2 days
- Umebachi Ryoma Zaiku Convex Bottom PlaneA plane suitable for cutting large curved surfaces. For work.Length (mm) 35 Mass (g) 120 Width (mm) 38 Blade Width (mm) 24 Height (mm) 120
- Kakuri Kakuri Angled Corner Plane Blade ReplacementA screw-type plane for work that makes it easy to adjust the blade. This product won the Japan DIY Show Minister of Trade Award. Kakuri Sangyo original representative product. An epoch-making replaceable blade type plane that can be chamfered at 45 degrees, 60 degrees, and 30 degrees. A crafting ... Read MoreLength (mm) 151 Material (Blade) Carbon steel SK-5 Width (mm) 52 Material (Shorter Rule) Oak Height (mm) 23from S$76.99Min. 2 days
- Tajima (TJM DESIGN) Hard chamfering canna V4516 times more durable with ultra-durable ceramic blades for hard building materials Chamfering grinding tool for gypsum board * Because it is a knife, please handle it with care. * Please dispose of the bent blade after use. * Product specifications are subject to change without notice. Please no... Read MoreChamfering (Width) 1-3mm chamfer angle (°) 45 Type For decora, veneer, and cauldron Replacement Blades TMKB-C50, L type blade, J type bladefrom S$68.99Min. 2 days
- MURATEC-KDS Board Canna VHThe chamfer width can be adjusted steplessly. Since it is a special resin containing glass fiber, it is slippery and highly durable. For chamfering and flat cutting of gypsum board.Blade Thickness (mm) 0.5 Blade Width (mm) 18 Overall Length (mm) 180 Dimensions, Vertical x Horizontal x Height (mm) 180×58×44mm Mass (g) 247 Blade Length (mm) 50 2018 Trusco page 7 0059 Trusco Part No. 837-0751 Color Yellowfrom S$32.99Min. 2 days
- Tajima (TJM DESIGN) Hard chamfering canna H4516 times more durable with ultra-durable ceramic blades for hard building materials Chamfering grinding tool for gypsum board * Because it is a knife, please handle it with care. * Please dispose of the bent blade after use. * Product specifications are subject to change without notice. Please no... Read MoreChamfering (Width) 1-3mm chamfer angle (°) 45 Type For decora, veneer, and cauldron Replacement Blades TMKB-C50, L type blade, J type bladefrom S$68.99Min. 2 days
- BIGMAN Hobby CannaUltra-compact type that can be easily used for detailed work with sharp sharpness for both push and pullBlade Size (mm) 25 Mass (g) 91 Included Accessories One replacement blade Main Unit Size (mm) Width 70 x depth 140 x height 30
-
- Kakuri Kakuri Mini Single-Blade PlaneSingle-edged hobby plane.Mass (g) 145 Dimensions, Height x Width x Thickness (mm) 150×50×35 Dimension (mm) 40×140from S$18.99Min. 2 days
- Kakuri Kakuri Ebony Small Plane Inner Corner No.2A screw-type plane for work that makes it easy to adjust the blade. A plane for work that can be used when taking a rounded surface at the corner. It is small and easy to hold, and the ebony material gives it a luxurious feel. It is for work that is ideal for detailed work using ebony as the mate... Read MoreMaterial (Blade) Heiss Material (Shorter Rule) Kurodan Case Polypropylene Size S Included Accessories Storage casefrom S$46.99Min. 2 days
- GISUKE (Takagi) Bean Square Convex Bottom Plane for CraftworkThe hook stand has a spherical shape, and the inside of the spherical surface is scraped. * The brand has changed from Kikuo to Kikudo.Dimension (mm) 18from S$56.99Min. 2 days
- Yamatani Works Board cannaThe sharpness of the blade is greatly improved with an acute angle of 30 °! It can cut even the surface paper of gypsum board. For chamfering gypsum board, wood, veneers, etc.!Mass (g) 180 Dimension (mm) About width 180 x height 25 x depth 55 Replacement Blades For each manufacturer cutter L typefrom S$33.99Min. 2 days
Filter by categories
