Rebar Cutters & Benders

The curved plate and curved rod are integrated, and the bender has a roll, so it can be bent easily. Bending work for iron wires, deformed reinforcing bars, etc.

Reinforcing bars up to 13 mm can be cut and bent. When bending, the handle direction is from bottom to top. For cutting and bending reinforcing bars.

It is a single-acting spring return type. It has a built-in hydraulic pump. Easy to operate with guillotine cutting. The receiving blade side can be opened with a simple operation. * Please read the instruction manual for safety when using.

It uses a special industrial steel material and has achieved high durability by its own heat treatment process. No pipe installation work is required and it can be used immediately. For bending reinforcing bars, reinforcing bars, and deformed reinforcing bars.

It uses a special industrial steel material and is strong and long-lasting by using a heat treatment boss. For bending reinforcing bars, reinforcing bars, and deformed reinforcing bars.

It can easily cut steel straps that cannot be cut with conventional steel strap cutters. Ideal for cutting iron plates, tinplates, baling hoops, and other steel straps for packing.

One handle can be used for both 10 to 13 mm. The handle uses a hardened pipe and is very strong. For bending reinforcing bars, reinforcing bars, and deformed reinforcing bars.

It uses a special industrial steel material and has achieved high durability by its own heat treatment process. For bending reinforcing bars, reinforcing bars, and deformed reinforcing bars.

You can easily bend aluminum plates and copper plates at home. It is a simple bending tool that can be bent by hand between two handy type vices. You can easily work anywhere without the need for an installation location. Various processing such as U-shaped bending and step bending is possible de... Read More

Bending can be approached from 3 angles, improving workability! For bending work in narrow spaces. Greater freedom of bending work! It is possible to bend greatly at once! For bending rebar.

The blade angle is easy to insert into the narrow gap of the band and has good workability. Ideal for cutting iron plates, tin plates, bering hoops, packing strips, and polypropylene bands. Ideal for cutting iron plates for packing such as iron plates, tin plates, and bering hoops. * When cutting... Read More

Electric wires and cables can be easily bent with one hand. Bending of electric wires IV lines, CV lines, etc. is easy, light, strong, and clean, and can be easily bent in narrow spaces. Made of chromoly steel head.

With a 45 ° bend, it is ideal for straightening. Bending work for iron wires, deformed reinforcing bars, etc.

Bends 45 degrees, making it ideal for straightening.

A lightweight, power-free manual tool that can be used anywhere. The cut end is clean without crushing threads or burrs, so the cut bolt can be used as it is. Spare blade type

It comes with a pipe and can be used as it is. Bending work for iron wires, deformed reinforcing bars, etc.

It comes with a pipe and can be used as it is. Bending work for iron wires, deformed reinforcing bars, etc.

Strong and long-lasting by using heat treatment boss. Bending work for iron wires, deformed reinforcing bars, etc.

Designed with an emphasis on stability, sharpness, ease of use, and durability.

Designed with an emphasis on stability, sharpness, ease of use, and durability. Stable malleable cast iron base steel pipe handle, The special steel blade, which has both sharpness and durability, makes work efficiency much easier and faster. Material to be cut / Steel bar for reinforced concrete... Read More

Contains deformed reinforcing bars. Bending work for iron wires, deformed reinforcing bars, etc.

The cutting edge can be smoothly inserted by hitting the tightly tightened iron band with a striker. You can easily cut even iron strips that cannot be cut with conventional iron strip cutters. The handle expands and contracts. Ideal for cutting iron plates for packing such as iron plates, tin pl... Read More

A spare blade for SS450.

The blade angle is easy to insert into the narrow gap of the band and has good workability. Ideal for cutting iron plates, tin plates, bering hoops, packing strips, and polypropylene bands. Ideal for cutting iron plates for packing such as iron plates, tin plates, and bering hoops. * When cutting... Read More

Two cutter blocks are used for each rebar cutter, but you can order from one. For cutting up to rebar D13

The hit universal rebar cutter with bender is an excellent model with both cutting ability and bender function (bending process). Since the pipe diameter of the handle is large, there is little deflection and it is easy to cut.

A set of 2 spare blades that can be attached to the boosting power Zungiri cutter (ZCB-38M) to cut M10 Zungiri bolts. * Cannot be used as a replacement blade for the old type ZCB-38.

Replacement blade for RC13BN and RC13BR.

It is possible to cut workpieces up to HRC48. A special rubber is sandwiched between the joint stoppers to soften the impact during cutting. The ergonomic shape reduces work fatigue. Precise adjustment (12 steps) and readjustment are possible with eccentric bolts. By optimally adjusting the cutti... Read More

Spare blade for boosting power cutter (ZCB-38M)

Reinforcing bars up to D13 can be processed without the need for a power supply. You can choose from two types: push-down type 13HP and push-up type 13HPR. In bending, you can easily make "90 degrees", "135 degrees", and "180 degrees". * We do not deliver to private ... Read More