Vises / Clamps / Hand Presses
Vise / clamp / hand press is used for carpentry and factory work. A vise is a work tool for fixing materials, and a clamp is a work tool used for fixing and joining materials, and a hand press is a simple press that can be moved by hand. Panels can be fixed at 90 degrees, or objects with an angle can be fixed. Choose a clamp that is suitable for the size and material of the material, such as a vise that can fix even round objects, a clamp that can quickly tighten, or a hand press that can put numbers and marks into plastic materials. I can.
Other Related Pages
- MonotaRO Strong B Type ClampIt is a tool that holds and fixes an object during machining and assembly work. Since the screw part has a hexagonal shaft shape, it can be further tightened with spanners and wrenches. For holding workpieces during welding and drilling operations. * Do not hit with a hammer etc. * Please note th... Read MoreType Giant clam vise Material (Main Unit) S45C (forged / heat treated)
- MonotaRO Clamp L Type StandardSince the arm slides up and down, it can be adjusted quickly and tightened. With a rubber hit, it does not damage the object. It can be widely used for factory work, machine work, automobile maintenance, woodworking work, farm equipment repair, carpentry work, etc. * Do not use for anything other... Read MoreMaterial # 45 carbon steel (forged) Material (Main Unit) # 45 carbon steel (forged) Dimension A (mm) 15.7 Dimension B (mm) 7.7 Clamping Force (kg) 70 Jaw Depth (mm) About 80 Type L clamp/F type clamp
- MonotaRO Reed Vise Ductile Cast Iron with TurntableBecause it uses ductile cast iron, it has excellent impact resistance and durability. Since it has a rotating disk, the orientation can be adjusted according to the processing direction. Since it has an anvil, it can also be used for striking work. For fixing the object to be processed. * Do not ... Read MoreMaterial Ductile cast iron
- MonotaRO Reed Vise Ductile Cast IronIt can be used for simple tightening work. Because it uses ductile cast iron, it has excellent impact resistance and durability. Since it has an anvil, it can also be used for striking work. For fixing the object to be processed. * Do not tighten with a force greater than the maximum tightening p... Read MoreMaterial Ductile cast iron
- EIGERTOOL Micro ClampAn ultra-compact and lightweight clamp that has never been seen before. It is ideal for fixing lightweight objects and places that are too large to fit with conventional clamps.Material (Main Unit) Aluminum Type Precision clamp Material (Set screw) Steel plating
- BeHAUS Steel Frame Clamp Deep ThroatSince it is deeper than the normal type, it is convenient for fixing deep materials. For fixing / bonding workType Giant clam vise Material (Main Unit) Steel
- NABEYA Lead type viceThe tightening force is large. The internal processing of the main body is broached, so the loss load is small and a large tightening force can be obtained. Good durability. The parts are tough cast iron and ductile, which are strong in both damage resistance and durability. Refueling is easy and... Read MoreRoHS directive (corresponding to 10 substances) Correspondence
- TRUSCO Pin Vise for Electric ToolsA pin vise that is ideal for drilling fine-sized holes and deburring. It can be used for various purposes such as precision machining and hobby drilling and tap holders.Mass (kg) 0.033 Suitable Size (mm) 0.1~2.0 Trusco Part No. 437-4215 Overall Length (mm) 65 Material Chuck cap: brass Material (Main Unit) Free cutting steel Type Pin vice Main Application Precision machining / drilling work
- Strong Tool Wide ClampFor tightening extremely small parts such as models, machine tools, and equipment! For bonding and fixing work such as models and crafts!Type Giant clam vise Material (Frame) Steel plate Material (Main Unit) Steel sheet
- ANEX Strong pin vise, fine shaft penetration typeIt is a penetration type that does not choose the length of the drill chuck. For drilling work such as metal engraving, metal plate, model, beads, base making, etc.Material Cap / Chuck: Iron, Body: Brass
- M&M Home viceExcellent workability with 360 ° rotation. With anvil, striking work is also possible. Made of sturdy cast iron For fixing workpieces during cutting, polishing, and bonding workTip Width (mm) About 80 Anvil (mm) About 60 × 70 Opening width (mm) About 80 Mouth depth (mm) About 48from S$109.90Min. 2 days
- MURATEC-KDS Stabilization railMain Unit Dimensions (mm) 30×35×21 Trusco Part No. 853-4812 RoHS directive (corresponding to 10 substances) Correspondence Set Contents Stabilization rail: 2from S$3.69Min. 2 days
- TRUSCO Ethoma Multi Club ClampMaterial (Main Unit) Medium carbon steel (S45C) Type Other clampfrom S$28.99Min. 2 days
- ESCO 70mm precision viseTip Width (mm) 70 Maximum Jaw Opening (mm) 80 Material (Main Unit) Alloy steel Esco Part No. EA525AV-11 Type Precision vicefrom S$869.90Min. 4 days
- TRUSCO Middle cap set for TMB125Mass (g) 500 Trusco Part No. 450-7819 Suitable Model TMB-125from S$24.99Min. 32 days
- NakaSeiki Hand press (toggle type)Suitable for press-fitting bearings, shafts, pins, etc., bending, cutting, caulking of thin metal plates and thin rods, stamping numbers, marks, etc. on thin metal plates, plastic materials, etc. It is suitable for bending, caulking, and punching because it can exert a strong force (25 to 75 time... Read MoreDimension (mm) (Overhang) 86from S$3,999.00Min. 5 days
- ESCO 48mm precision viseTip Width (mm) 48 Maximum Jaw Opening (mm) 75 Material (Main Unit) Alloy steel Esco Part No. EA525AT-2 Type Precision vicefrom S$389.90Min. 4 days
- ESCO 63mm precision viseTip Width (mm) 63 Maximum Jaw Opening (mm) 90 Material (Main Unit) Alloy steel Esco Part No. EA525AT-3 Type Precision vicefrom S$399.90Min. 4 days
- MonotaRO Press ClampAn affordable product that is useful for simple holding work. For easy holding work. * Do not hit with a hammer etc. * Please note that tightening on slanted workpieces is slippery.Material Steel sheet
- BAKUMA INDUSTRIAL One Touch Power ClampYou can remove it immediately by tapping it with a gavel or a small noh (one touch). Since the grip end has a 17 mm square protrusion, strong retightening is possible with a spanner or the like. Since the cap part is tiltable (about 20 degrees), it can be easily tightened and pressed even if ther... Read MoreFrame (mm) 15.5×7.5 Type L clamp/F type clamp Included Accessories cap
- MonotaRO Clamp AluminumSince it uses aluminum, it is light and does not rust easily. For easy holding work. * Do not hit with a hammer etc. * Please note that tightening on slanted workpieces is slippery.
- MonotaRO Pin ViceSince it is a type that stores collets, it is compatible with drills of Φ0.1 to 3.2 mm according to the application. It can be widely used from precision machining of boards and parts to drilling of plastic models, models, and beads. * Do not use for any purpose other than its intended purpose. *... Read MoreSuitable Size (mm) 0.1~3.2 Overall Length (mm) 93 Material (Main Unit) Brass Type Pin vice Main Application Precision machining work Specification Single-headed
- MonotaRO Corner Clamp AluminumThis is convenient when fixing at 90 ° such as a panel. * Do not use for anything other than its intended purpose.Depth D (mm) 100 Height H (mm) 105 Overall Length (mm) 208 Maximum Jaw Opening (mm) 75 Mass (g) About 194 Material (Main Unit) Aluminum alloy Type Angle clamp / corner clamp
- LOBSTER (LOBTEX) C Clamps B Type Standard EcoQuality such as strength is equivalent to the conventional product (B type) !! Abundant size variations (8 sizes in total) * Please do not use it as a hanging tool. Do not connect to scaffolding, etc., or attach it to something and use it as a scaffolding. Make sure to tighten it securely. Do not... Read MoreType Giant clam vise Material (Main Unit) Special steel
- Strong Tool C Clamp PressType Giant clam vise Material (Main Unit) Steel plate
- SUN UP Work Bench ClampFor woodworking, welding, bonding and machine assemblyType Giant clam vise Material (Main Unit) Iron Finish Plating
- MonotaRO Bench Vise Clamp Type with TurntableSince it is a clamp type, it can be easily fixed to the workbench. Since it has a rotating disk, the orientation can be adjusted according to the processing direction. Since it has an anvil, it can also be used for striking work. For fixing the object to be processed. * Do not tighten with a forc... Read MoreOverall Length (mm) 155 Overall Height (mm) 185 Mouth depth (mm) 30 Maximum Clamping Force (kN) 4 Anvil (mm) 41×28 Jaw Opening (mm) 50 Material Gray cast iron
- BAKUMA INDUSTRIAL Neck power clampCan be used widely. It is a type with a depth of 120 mm, which is 60 to 40 mm deeper than a normal power clamp. You can also fix members with depth. You can remove it immediately by tapping it with a gavel or a small noh (one touch). Since the grip end has a 17 mm square protrusion, strong retigh... Read MoreJaw Depth (mm) 120 Type L clamp/F type clamp
- BeHAUS Spring ClampSpring-type clamp that can be clamped with one touch A coating of advanced resin that does not damage the product For fixing materials when cutting, gluing, and nailingFinish (Tip / Grip) Resin coating Type Spring clamp
- MonotaRO Press Clamp Deep TypeAn affordable product that is useful for holding deep materials. For holding materials with depth. * Do not hit with a hammer etc. * Please note that tightening on slanted workpieces is slippery.Material Steel sheet
- MonotaRO Handy clampConvenient for bonding and temporary fixing of wood and resin. It has a lock function and is convenient when there is no space to pinch it or when you want to fix it in the back. For bonding, molding, nailing, sawing, etc. of plywood, wood, steel plate, resin plate, plywood, etc. * Do not use for... Read MoreHeight H (mm) 23 Material (Main Unit) Nylon + glass fiber Material Nylon + glass fiber Type Spring clamp
- TRUSCO Mantis shrimp (barco type)Since the head is hexagonal, the final tightening is possible with a wrench. A tool that sandwiches and fixes a workpiece between two opposing surfaces during machining and assembly work. Used for fixing and holding workpieces during welding and drilling work. * Cannot be used with an impact wrench.Type Giant clam vise Material (Main Unit) Medium carbon steel (S45C) Specification Parker finish, forged product
- GISUKE (Takagi) Steel Hand ClampFor tightening and fixing.Type Spring clamp Material (Main Unit) Steel
- SK (Niigata Seiki) Miniature ViceConvenient for holding and fixing fine workpieces Since it has a V-groove, it is possible to fix round objects. For hobby, holding, fixing, soldering, adhesion, etc.Maximum Jaw Opening (mm) 20 Type Precision vice Tip Width (mm) 25
- stax tools Clamping SquareIt can be used in various situations instead of making boxes and squares. Please use it for each corner when making boxes and shelves. It is possible to make a clean box without distortion. If the drawer is also distorted, it will not fit well. Even when hitting a screw, it can be hit very smoothly.Type Angle clamp / corner clamp
- EIGERTOOL Precision ClampCompact precision clamp.Type Precision clamp Material (Main Unit) Steel
- IRWIN Handy ClampA swivel pad that does not easily damage the object. Quick release lever. Highly durable resin body containing glass fiber.Material (Main Unit) Resin with glass fiber Type Spring clamp
- MonotaRO Handy clamp telescopicConvenient for bonding and temporary fixing of wood and resin. It has a lock function and is convenient when there is no space to pinch it or when you want to fix it in the back. Also, since the arm is telescopic, the opening size can be changed. For bonding, molding, nailing, sawing, etc. of ply... Read MoreDepth D (mm) 110 Overall Length (mm) 180 Mass (g) 220 Height H (mm) 23 Maximum Jaw Opening (mm) 50~150 Material (Main Unit) Nylon + glass fiber Material Nylon + glass fiber Type Spring clamp
- STAR ELECTRIC MANUFACTURING (SUZUKID) Corner clampIt can be fixed at right angles or vertically. Clamp for fixing and right-angled materialMass (kg) 1.1 Dimensions, Width W x Height H x Depth D (mm) 200×200×60
- MonotaRO Press clamp extra small setIt is an affordable product that is useful for detailed work such as models and crafts. For detailed holding work such as models and crafts. * Do not hit with a hammer etc. * Please note that tightening on slanted workpieces is slippery.Jaw Depth (mm) 10 Maximum Jaw Opening (mm) 10 Material Steel sheet
Filter by categories