QL head exchange type. A cost-saving torque wrench that allows you to replace the head with a single torque wrench, such as spanners, ring spanners, ratchets, and hex heads. When the set torque is reached, the toggle operates and you can detect the completion of tightening with a light and clean ... Read More
Main Application For tightening Type Preset type/Head exchange type Head Shape Replaceable head Load Direction Right Accuracy (%) ±3
The QL-MH series torque wrench with ratchet has a replaceable head metal handle (knurled grip) that is easy to use even with work gloves and easy to wipe off even if it gets oily. When the set torque is reached, the toggle operates and you can detect the completion of tightening with a light and ... Read More
Main Application Harsh workplace Type Preset type/Head exchange type Head Shape Replaceable head Load Direction Right Accuracy (%) ±3
Replaceable head of PQL. Pre-lock type that requires tools to set torque even with a scale. Prevents tightening mistakes due to incorrect torque settings.
* For products with calibration documents and traceability system diagrams, we can only accept orders on the web. * Replacement head is sold s... Read More
RoHS directive (corresponding to 10 substances) Correspondence Main Application For tightening Specification ISO6789 Type Pre-lock / head replacement type Head Shape Replaceable head Load Direction Right Accuracy (%) ±3
Torque wrench with replaceable head. Bolts and nuts can be tightened within the torque range. High torque accuracy of ±3%. Torque settings can be easily set using a scale, and torque settings can be easily changed by simply pulling down the lock ring at hand to unlock and operate. The push-releas... Read More
female drive size (mm) 9×12 Main Application For tightening Head Shape Replaceable head Type Replaceable head Accuracy (%) ±3
QL head exchange type. CL5 with a large torque scale and CLE2, a large model that is about 20% lighter than conventional products.
* For products with calibration documents and traceability system diagrams, we can only accept orders on the web. * Replacement head is sold separately. * Products wi... Read More
RoHS directive (corresponding to 10 substances) Correspondence Main Application For tightening Specification ISO6789 Type Preset type/Head exchange type Head Shape Replaceable head Load Direction Right Accuracy (%) ±3
With one torque wrench, you can use it for different purposes such as spanners, glasses, hexagons, ratchets, etc.
For work that must accommodate several tightening torques.
* For products with calibration documents and traceability system diagrams, we can only accept orders on the web. * Head sol... Read More
RoHS directive (corresponding to 10 substances) Correspondence Main Application For tightening Type Preset type/Head exchange type Head Shape Replaceable head Load Direction Right Accuracy (%) ±3
A ratchet head for a replaceable head torque wrench.
For tightening work from machine screws to large diameter bolts
* Do not use for any other purpose.
Number of Teeth 72T male drive size (mm) 9×12 Material Chromium vanadium steel
Type Replaceable head Esco Part No. EA723-25 Overall Length (mm) 315～342 Head Shape Spanner type / head exchange type Torque Adjustment Range (Nm) 10/18/42/55/65/75 Main Application Refrigerant equipment
Set a commercially available tool and use it as a torque wrench. (PATENTED) You can set spanners, glasses, ratchet handles, hex wrench, etc. When the set torque is reached, the toggle operates and you can detect the completion of tightening with a light and clean signal sound. Wide range that can... Read More
Minimum Scale (Nm) 0.2 Torque Adjustment Range (Nm) 10～70 Overall Length (mm) 237.5 Trusco Part No. 325-7207 Mass (g) 650 RoHS directive (corresponding to 10 substances) Correspondence Main Application For tightening Type Pre-lock / head replacement type Head Shape Replaceable head Load Direction Right Included Accessories With resin handle Accuracy (%) ±5
A cost-saving torque wrench that allows you to replace the head with a single torque wrench, such as spanners, ring spanners, ratchets, and hex heads. When the set torque is reached, the toggle is activated and you can detect the completion of tightening with a light and clean signal sound.
Harsh... Read More
Compatible replacement head (SH・RH・QH・HH・DH・RQH)15D Mass (kg) 0.67 Minimum Scale (Nm) 1 Trusco Part No. 272-4537 Torque Adjustment Range (Nm) 30～140 Overall Length (mm) 370 Main Application Harsh workplace Type Preset type/Head exchange type Head Shape Replaceable head Load Direction Right Specification [Torque] ± 3% Accuracy (%) ±3
The tip can be installed smartly with the specified torque. When the specified torque is reached, it spins and prevents overtorque. With a drive angle of 1 / 4SQ, you can use your own bit. The grip is replaceable and has storability.
For throw-away tip replacement, tightening of delicate products... Read More
Square Drive (mm) 6.35 Main Application For tightening Type Replaceable head Accuracy (%) ±10
* For products with calibration documents and traceability system diagrams, we can only accept orders on the web. * Products with proofreading cannot be canceled after ordering. * Products that include (with traceability system diagram) in the product number will be shipped with the manufacturer&... Read More
The tip can be installed smartly with the specified torque. When the specified torque is reached, it spins and prevents overtorque. With a drive angle of 1 / 4SQ, you can use your own bit. With a long bit, you can work smoothly in deep places. IP = Torx Plus.
For throw-away tip replacement, tight... Read More
Square Drive (mm) 6.35 Main Application For tightening Type Replaceable head Accuracy (%) ±10
With PCL limit switch. Pokayoke torque wrench to prevent forgetting to tighten.
* For products with calibration documents and traceability system diagrams, we can only accept orders on the web. * Products with proofreading cannot be canceled after ordering. * Products that include (with traceabil... Read More
RoHS directive (corresponding to 10 substances) Correspondence Main Application For tightening Specification ISO6789 Type Pre-lock / head replacement type Head Shape Replaceable head Load Direction Right Accuracy (%) ±3
The tip can be installed smartly with the specified torque. When the specified torque is reached, it spins and prevents overtorque. With a drive angle of 1 / 4SQ, you can use your own bit.
For throw-away tip replacement, tightening of delicate products such as resin, and other precision work that... Read More
Square Drive (mm) 6.35 Main Application For tightening Type Replaceable head Accuracy (%) ±10
Overall Length (mm) 386 Head Shape Replaceable head Minimum Scale (Nm) 0.5 Main Application For tightening Accuracy (%) ±3 Torque Adjustment Range (Nm) 20～100 Type Replaceable head Esco Part No. EA723S-23
Overtorque during tightening is prevented by the two-step motion of the signal and cushion. When the set torque is reached, the toggle operates and it spins about 5 °, and when tightening is continued, it spins about 14 °. Head replaceable torque wrench. A cost-saving torque wrench that allows yo... Read More
Torque Adjustment per 1 Scale (Nm) 0.25 Mass (kg) 0.53 Operation Force, at Maximum Torque (N) 145.5 Torque Adjustment Range (Nm) 20～40 Effective Length (mm) 275 Overall Length (mm) 309 RoHS directive (corresponding to 10 substances) Correspondence Head Shape Replaceable head Accuracy (%) ±3
RoHS compliant product Adjustable type A cost-saving torque wrench that allows you to replace the head with a single torque wrench, such as spanners, ring spanners, ratchets, and hex heads. When the set torque is reached, the toggle is activated and you can detect the completion of tightening wit... Read More
Minimum Scale (Nm) 0.5 Type Replaceable head Torque Adjustment Range (Nm) 25～130 Esco Part No. EA723S-26 Accuracy (%) ±3 Head Shape Replaceable head Overall Length (mm) 421 Main Application For tightening
Overall Length (mm) 467 Esco Part No. EA723S-27 Type Replaceable head Head Shape Replaceable head Minimum Scale (Nm) 1 Accuracy (%) ±3 Torque Adjustment Range (Nm) 40～200 Main Application For tightening
The claw foot replacement head is a set of 5 types that are frequently used. Comes with a dedicated tray (W447 x D185 x H30). Fixed position management is easy, and work efficiency can be improved. A free space is provided in the dedicated tray. Additional replacement heads can also be stored. It... Read More
You can easily set the torque by pushing up the torque wrench lock lever with replaceable head and sliding the torque scale. The head is replaceable and it is convenient to use many insert tools for different purposes. When the specified torque is reached, it can be sensed with a clicking sound a... Read More
Over-torque during tightening is prevented by two-step motion of signal and cushion. When the set torque is reached, the toggle operates and rotates about 5°, and if tightening is continued, it idles about 14°. Head replaceable torque wrench. A cost-saving torque wrench that can replace the head ... Read More
RoHS directive (corresponding to 10 substances) Correspondence Accuracy (%) ±3
CLWP is a waterproof torque wrench with a highly corrosion-resistant surface treatment that can be washed with water even if it gets dirty. Achieves IP55/IP57 dustproof and waterproof protection grades. Pre-lock type with torque scale. Torque can be adjusted by removing the rubber cover and using... Read More
RoHS directive (corresponding to 10 substances) Correspondence Accuracy (%) ±3
Various heads can be used with the head exchange type.
For tightening torque control of bolts and nuts.
Minimum Scale (Nm) 0.2 Mass (g) 200 Overall Length (mm) 208 Torque Adjustment Range (Nm) 5～25 Practical Torque Range (Nm) 5～25 Square Drive (mm) 9.5 Load Direction Right Material Special steel Accuracy (%) Torque: ±3
FUSO Head Replaceable Type Torque Wrench SetIt is a bargain set that can be used widely with peace of mind, compatible with new refrigerants and conventional refrigerants from 1/4 to 5/8 inch.Head Shape Replaceable head Main Application Refrigerant equipment Opening Diameter (Φmm) 17、22、24、27、26、29 Torque Adjustment Range (Nm) 10～75 Flare Size (inch) 1/4、3/8、1/2、5/8、R410A 1/2、R410A 5/8
![[17-29mm] Flare nut torque wrench set (for self-management)](https://jp.images-monotaro.com/Monotaro3/pi/middle/mono50176193-170405-02.jpg)
