Double Faced Hammers

Double-ended Genno.

"Fujimoto Gen-Oh Series" A carefully crafted Gen-Oh and a mallet. Although it is for craftsmen, it can also be used by the general public. Due to the plated finish, it is resistant to rust and dirt, making it ideal for interior work. The hardened surface is hardened at the center, and t... Read More

Before using, set the handle on your head and drive in a wedge to check that there is no rattling before using.

Useful when you need a powerful blow. General construction and civil engineering work. * Do not use for any other purpose.

Lightweight and tough! Made of polypropylene handle that is hard to break and supple. The grip that sticks to your hand absorbs shocks.

Outstanding strength comes from thorough quality control. The head is completely heat-treated, and the handle is a carefully selected main oak. With the manufacturer's unique pattern sedge method, you can use it with confidence without rattling. Gold Zojirushi Casting series

Comes with a non-slip rubber clip. (# 6 to # 12 only) # 1 1/2 to # 3 1/2 heads are red, # 4 and above are shot finish General construction and civil engineering work. Driving anchors / surveying nails, etc.

The double-molded polypropylene handle improves work efficiency with an easy-to-grip grip that lightly sticks to your hand. General construction and civil engineering work.

The fiberglass pattern has less impact impact than the wooden pattern and is easy on the hands. Tapered and thick glass pattern specifications.

Uses a glass fiber pattern for excellent durability and safety. Uses a soft grip that is non-slip and gentle on the hands. By attaching a protect ring, the connection between the head and the handle is protected. The head is completely hardened (hardness 50-55 degrees). General construction and c... Read More

Uses good quality oak with a moisture content of 14% or less Demolition work

The handle uses a triple-structured glass fiber pattern for excellent durability and safety. PP (polypropylene), which protects against chipping due to damage, is molded into the glass fiber, which is a pultrusion molding material with excellent elasticity, and a soft grip that is easy on the han... Read More

Since the handle is shorter than the regular product, it is easier to hit. Using a special full-face rubber grip, it is hard to slip and fits comfortably in your hand. The entire surface of the hammer has a shape that is ideal for driving anchors. Post-construction anchor construction tool

A convenient tool that can be used easily. For driving small nails and safety pins! The round one is convenient for driving the head of a nail! For repair and maintenance work, etc. * Please do not modify it unnecessarily. Please do not use it for any purpose other than its intended purpose.

A sheet metal and a hammer for dismantling work that uses a 2.0 kg type steel head (tapping part) and a wooden handle that fits in your hand the more you use it. The head is a completely heat-treated product using carbon steel S45C equivalent, beautifully with less rust due to careful mirror poli... Read More

A hammer that is hard to come off with a horizontal wedge. One side is flat and the other side is convex, so it is suitable for killing trees. A grip that fits in your hand. For woodworking work.

Uses a glass fiber pattern for excellent durability and safety. Uses a soft grip that is non-slip and gentle on the hands. The head is completely hardened.

You can hit the hardened steel without damaging it. Machine assembly, mold making

A sheet metal and a hammer for dismantling work that uses a 2.5 kg type steel head (tapping part) and a wooden handle that fits in your hand as you use it. The head is a completely heat-treated product using carbon steel S45C equivalent, beautifully with less rust due to careful mirror polishing,... Read More

The double-molded polypropylene handle is light, and the easy-to-grip grip that sticks to your hand improves work efficiency. For machine assembly and fine adjustment work.

The double-molded polypropylene handle is light and has a grip that is easy to grip and improves work efficiency. Chipping work

Lead is very soft and has a strong characteristic, so you can bang it without damaging your opponent. A hammer that makes it easy to fine-tune the striking force. Machine assembly, fine adjustment work, sheet metal work

Compact and easy to use, short type. * Be sure to wear safety protective equipment and safety glasses. When hitting a metal object, hit it in the center of the hitting surface. Kado hitting may cause injury. Please refrain from using if there is rattling or cracks.

The steel core material achieves three times the durability of the wooden handle. The head is hardened with special steel to the inside, greatly improving durability. The main body is integrally molded with impact resistant plastic. You can rest assured that the hammer's head will not come off.

Lightweight and easy to use, it is three times stronger than a wooden handle and has excellent durability. Approximately 1.5 tons of pulling plate strength due to special aluminum wedge and special epoxy adhesion. Scales of dimensions S and centimeters are engraved on the left and right sides of ... Read More

For assembling and disassembling wedge-type scaffolding. You can choose from four types: lightweight, medium weight, heavy, and quiet. Construction work in hospitals, schools, childcare, welfare facilities, etc. where noise is a concern is a quiet type.

Hammer for driving scaffolding and dismantling for secondary measures with a rubber grip structure that covers the whole! The welded body is covered with rubber to prevent the head and shaft from falling. (Secondary measures) With a grip structure that covers all the shaft, it will not damage the... Read More

It has a large striking surface and is suitable for work. It is used for chiseling and engraving work.

Kakuri's octagonal Noh with a luxuriously polished finish. Used for nailing and chiseling. You can also hit sideways.

Easy-to-grip and non-slip soft grip Heat-treated pipe handle that is hard to bend

Suitable for nailing around 40 mm.

Since the glass fiber handle is used, the handle breakage under harsh conditions is reduced. Demolition work

Lightweight and easy to use, it is three times stronger than a wooden handle and has excellent durability. Approximately 1.5 tons of pulling plate strength due to special aluminum wedge and special epoxy adhesion. Scales of dimensions S and centimeters are engraved on the left and right sides of ... Read More

A multi-hammer that can be nailed and struck.

Ideal for general masonry work, stone splitting, and chipping work!