All Category

Wallboard Saws

View : Grid List
Filter

19 Item(s)

Set Ascending Direction
  1. Electric industry professional folding Oshikiri saw
    JEFCOM (DENSAN) Electric industry professional folding Oshikiri saw
    Folding, lightweight and compact push-cut saw blade type that is economical and non-slip grip that fits your hand Nickel-plated finish blade For general wood, veneer, gypsum board
    Wall Thickness (mm)  1.3  Blade Thickness (mm)  1.3  Band Width (mm)  1.75  Blade Length (mm)  120  Mass (g)  132  Dimensions when Folded (mm)  150  Width (mm)  19  Overall Length (mm)  259  Height (mm)  53  Cell Spacing (mm)  9.5  End Folding Length  Possible  Material  SK-5 (carbon tool steel) 
    Rating:
    80%
    from S$29.99
    Min. 2 days
  2. Smart saw spare blade press cutting
    Tajima (TJM DESIGN) Smart saw spare blade press cutting
    Openings for gypsum board, veneer, etc. A common replacement blade for the full-scale hand saw and smart saw series. A push saw blade that prevents cutting powder from falling toward you, which is ideal for ceiling openings.
    Wall Thickness (mm)  Band Width (mm)  Blade Length (mm)  150  Mass (g)  16  Overall Length (mm)  186  Cell Spacing (mm)  2.4 
    from S$9.59
    Min. 2 days
  3. Smart saw
    Tajima (TJM DESIGN) Smart saw
    Push saw blade that makes it difficult for cutting powder to fall toward you, which is ideal for opening to the top. You can choose a replacement blade for all series of smart saw handles. Openings for gypsum board, veneer, etc.
    Band Width (mm)  Wall Thickness (mm)  Mass (g)  124  Blade Length (mm)  150  Cell Spacing (mm)  2.4  Overall Length (mm)  275 
    from S$26.99
    Min. 3 days
  4. Handy push cut saw
    JEFCOM (DENSAN) Handy push cut saw
    Benri saw ideal for wood, plywood, and new building materials
    from S$13.99
    Min. 3 days
  5. Short push-pull saw
    JEFCOM (DENSAN) Short push-pull saw
    A blade-shaped push-pull saw that can be cut by pulling or pushing A cutting hole is made at the tip of the blade. The blade length is short and compact, and the saw is easy to store in a work bag. Can move forward
    Blade Thickness (mm)  1.3  Overall Length (mm)  205  Mass (g)  45  Blade Length (mm)  80 
    from S$18.99
    Min. 4 days
  6. Tsukiriso type S
    KANZAWA WORKS Tsukiriso type S
    1 chome 2 roles, drill + thrust saw. A notch hole is made with a drill at the tip. Thick saw blade that is strong and hard to bend (120-170% thicker than conventional saw blades) Pushed off for drilling holes in electrical work, plumbing work, ventilation openings, etc. For gypsum board, ceramic ... Read More
    Blade Thickness (mm)  1.6  Saw cut (mountain / dimension)  12  Blade Length (mm)  150  Material (Blade)  SK-3 
    from S$16.99
    Min. 3 days
  7. Electric Works Smart Saw Pressing
    Tajima (TJM DESIGN) Electric Works Smart Saw Pressing
    A push saw blade that prevents cutting powder from falling toward you. With a sheath that is convenient for work while moving by attaching it around the waist or when storing it. Compatible with smart saw series blades. R-shaped grip that is easy to apply force. A safety rope can also be attached... Read More
    Wall Thickness (mm)  1.0  Groove width (mm)  1.3  Blade Length (mm)  150  Mass of Main Unit (g)  196  Tooth pitch (mm)  2.4  Overall Length (mm)  295  Trusco Part No.  813-4922  Type  For press cut 
    from S$36.99
    Min. 3 days
  8. On-site shop
    Ishinoko Industry On-site shop
    Compact design in pursuit of ease of use. It is large enough to fit in your pocket when folded. Uses a non-slip rubber grip for the grip. For plumbing work, electrical work, and general work.
    Wall Thickness (mm)  0.9  Blade Length (mm)  120  Folding dimensions (mm)  153  Dimensions in Use (mm)  170  End Folding Length  Possible 
    from S$19.99
    Min. 6 days
  9. Spare blade type swivel saw
    X-BEAM Spare blade type swivel saw
    A notch hole is made with the cutting edge. Because it is a push-cut, the cut edge on the surface is clean. Convenient for ceiling work as chips fall on the back side of the board. A grip with rubber that is non-slip and fits in your hand. For drilling holes in walls and ceilings during electrica... Read More
    Dimension (mm)  120 
    from S$24.99
    Min. 5 days
  10. For swivel cutting
    KANZAWA WORKS For swivel cutting
    The saw blade can be easily replaced and the length can be adjusted, and a notch hole can be drilled with a drill at the tip. Received the Japan DIY Association Chairman's Award in 1993.
    Saw cut (mountain / dimension)  (Oshime) 20  Blade Thickness (mm)  0.9  Blade Length (mm)  160  Material (Blade)  SK-5 / hard chrome plating 
    from S$22.99
    Min. 4 days
  11. Screwdriver type press saw
    JEFCOM (DENSAN) Screwdriver type press saw
    A notch hole is made at the tip of the blade. Thick saw blade that is hard to bend. Gypsum board, veneer, top plate sound absorbing tex, etc.
    Overall Length (mm)  200  Mass (g)  88 
    Rating:
    20%
    from S$21.99
    Min. 3 days
  12. Push saw
    JOB Master Push saw
    Parker finish diamond cut conspicuous for free cutting and detailed work Wood, plywood, etc.
    Overall Length (mm)  260  Blade Length (mm)  120 
    from S$19.99
    Min. 4 days
  13. Leather saw  Spare blade type  Saw
    RAZORSAW (RAZORSAW MANUFACTURING) Leather saw Spare blade type Saw
    A cutter type that is convenient to carry and uses a thick blade type that is easy to turn! Leather saw X series Spare blade type Thrust saw A sword that pushes and cuts. The cutter-type sword saw is compact and can be stored in a pocket, tool case, rucksack, etc., making it very convenient t... Read More
    Wall Thickness (mm)  0.9  Band Width (mm)  1.1 (reference)  Cell Spacing (mm)  1.9  Blade Length (mm)  80  Suitable Material  Gypsum board, caucal board, plywood  Material  SK-5 
    from S$8.99
    Min. 3 days
  14. Tsukiriso L-shape
    KANZAWA WORKS Tsukiriso L-shape
    1 chome 2 roles, drill + thrust saw. A notch hole is made with a drill at the tip. Thick saw blade that is strong and hard to bend (120-170% thicker than conventional saw blades) Pushed off for drilling holes in electrical work, plumbing work, ventilation openings, etc. For gypsum board, ceramic ... Read More
    Blade Thickness (mm)  1.6  Saw cut (mountain / dimension)  12  Blade Length (mm)  250  Material (Blade)  SK-3 
    Discontinued
  15. Push-turn saw
    SK (Niigata Seiki) Push-turn saw
    It is convenient for ceiling work because chips do not easily fall down. Spare blade type For drilling and hollowing out equipment related to electrical work, plumbing, etc. For processing wood, decorative plywood, new building materials, veneer board, gypsum board, etc.
    Number of Threads  12 mountains / 30.3, mm (1 inch)  Blade Length (mm)  120  Thickness (mm)  15  Overall Length (mm)  270  Mass (g)  45  Overall Width (mm)  52  Blade Thickness (mm)  About 1  Hardness  HV520~540  Material  Yasugi Steel Saw 
    Discontinued
  16. Pushing with a hole
    Ishinoko Industry Pushing with a hole
    Since the tip is sharp, it is easy to drill holes in the board. For cutting curves, hollowing holes, and hollowing out wood and gypsum board.
    Wall Thickness (mm)  Blade Length (mm)  120  Dimensions in Use (mm)  280 
    Discontinued
  17. File saw
    TRUSCO File saw
    Both work is possible because the shape is a combination of a woodworking drill and a saw. Since it has a push-cut tooth shape, it is suitable for work in narrow spaces. Even if you cut the gypsum board, it will not clog. A tool for drilling and cutting electrical and plumbing work. For drilling ... Read More
    Rating:
    100%
    Discontinued
View : Grid List
Filter

19 Item(s)

Set Ascending Direction