Keyhole & Compass Saws

Mainly used for cutting thick wood such as logs. With the shape of the blades curved outward, you can efficiently grind the saw. Cutting of raw and thick wood. * Secure a sufficient work space and check the safety of the surrounding area. * Do not use if the handle or saw blade is cracked or crac... Read More

Suitable for drilling holes in walls and ceilings, plumbing and electrical work. The easy-to-grip grip fits in your hand. Drilling and cutting work on gypsum board, plywood, etc. * Do not use for anything other than its intended purpose.

Uses Yasuki Steel, which is ideal for sawing materials. The blade-type tip that can be used for many purposes has an R shape, making it difficult to damage the wiring inside the wall.

Folding, lightweight and compact sliding saw blade type that is economically non-slip and fits your hand Grip clear paint finish blade For general wood, veneer, gypsum board

A special cutting edge makes it easy to make a notch hole! Freely cut straight lines and curves. Adjustable blade length. Equipped with two types of blades as standard. Fine blade for finishing work. Push-cutting blade with a clean cut end. For processing gypsum board, thin plate, sound absorbing... Read More

Benri saw ideal for wood, plywood, and new building materials

It is economical because it is a replaceable blade type. Great sharpness lasts for a long time. (Hard impulse processing) ← Pull 6: 4 Push → Adopts a sharpening that can be cut by pushing or pulling. The replacement blade is a screw type, so it is safe and easy to attach and detach. It is electro... Read More

The saw blade can be easily replaced and the length can be adjusted, and a notch hole can be drilled with a drill at the tip. The blade can be slid and adjusted from 120 to 220 mm depending on the work. Received the Japan DIY Association Chairman's Award in 1993 Details: For metals (iron, alu... Read More

Thick saw blade that is hard to bend! A special cutting edge makes it easy to open a notch hole. The length of the blade can be adjusted. The spare blade can be stored in the main body. Ultra-lightweight grip with two blades. Ideal for processing gypsum board, sound absorbing tex for ceiling, etc.

You can adjust the length of the blade according to the distance between the board and the wall. The saw blade is a slide type and is safe to carry. A special blade can be stored in the main body.

Powerful sharpness with two roles in one. Since it is a unique thorn processing, it can be cut by pushing or pulling. With a combination of a drill and a saw, it is possible to unfold from the pilot hole with one. Convenient for various drilling and unfolding work.

Uses Yasuki Steel, which is most suitable for sawing materials. With a replaceable blade type tip that can be used for many purposes, you can do everything from pilot drilling to cutting with just one. For drilling and hollowing out equipment related to electrical work, plumbing, etc. For grindin... Read More

Optimal for opening 150 mm size pull saw blade The handle of the R-shaped grip smart saw that makes it easy to apply force can be selected from all the replacement blades in the series. Openings for gypsum board, veneer, etc.

The saw blade can be easily replaced and the length can be adjusted, and a notch hole can be drilled with a drill at the tip. The blade can be slid and adjusted from 120 to 220 mm depending on the work. Received the Japan DIY Association Chairman's Award in 1993 Medium: For wood, plywood, etc.

Ideal for processing work such as gypsum board and sound absorbing tex for ceilings! Thick saw blade that is hard to bend The special cutting edge makes it easy to open a notch hole. Ideal for narrow spaces. A commercially available jigsaw blade can be used. Easy-to-grip soft grip A commercially ... Read More

Uses Yasuki Steel, which is ideal for sawing materials. It is convenient for ceiling work because the replaceable blade type chips that can be used for many purposes do not easily fall down. For drilling and hollowing out equipment related to electrical work, plumbing, etc. For grinding wood, dec... Read More

Various drilling and hollowing work for wood boards, plaster boards, plywood, plastics, etc. can be done easily! Stick saw for drilling and hollowing work.

Compact design in pursuit of ease of use. It is large enough to fit in your pocket when folded. Uses a non-slip rubber grip for the grip. For plumbing work, electrical work, and general work.

Affordable, Folding Saw Saw Lightweight, compact, and has a wooden handle that fits comfortably in your waist bag. Ideal for curve cutting that does not easily rust due to surface plating

Drill holes in wood board plywood with a sharp tip! Uses: Wood board Plywood board Resin board Drilling, expanding and hollowing out thick cardboard, etc.! Wood board Plywood board Resin board Drilling, unfolding, hollowing out, etc. of thick cardboard!

The grip shape twisted 90 degrees with respect to the saw blade allows quick and accurate cutting of left and right curves by controlling the palm, and reduces muscle fatigue. A ridge is attached to the upper part of the grip so that the direction of the saw blade can be easily confirmed regardle... Read More

Compact & smart! Foldable and compact storage Handle is easy to grip and pull Wood, gypsum board, etc. of 60 mm or less

A notch hole is made with a drill at the tip, and it is pushed through as it is, so workability is good. Uses a tool-free replacement blade method.

For free cutting and detailed work. Diamond cut conspicuous, woodworking hoodie finish Wood, plywood, etc.

It is a screw lock type. A cutter that is easy to grip. Secure the grip with the elastomer rubber and bold grip. Comes with a safety rope mounting hole. For drilling holes in gypsum board and cutting curves

A saw that can be used for woodworking, making plastic models, pruning potted plants, cutting branches of garden trees, bonsai, and foliage plants. The wooden handle has a shape that fits your hand, so workability is high. Compact and light, and the fine pitch makes it easy to work even in places... Read More

For precision cutting and drilling of wood (thin plate). For window punching of wood, veneer, decorative plywood, etc.

Suitable for curving thin plate materials. The mini size makes it convenient for work in tight spaces. It is a foldable type and easy to carry. Impact quenching makes the sharpness last longer. Plating is applied to prevent rust.

A saw that is ideal for cutting gypsum board and curving wood. It is useful for various drilling work such as electricity, water, and gas works. Since the blade width is narrow, it is also suitable for do-it-yourself wood hollowing, curve cutting, and bonsai pruning. Since it is compact and has a... Read More

Both diced and curved are smooth and smooth !! Dedicated thick saw blade that is hard to break Pull cutting blade (standard equipment) Can be replaced according to the application! Convenient replaceable blade type Easy-to-grip round soft grip Dedicated thick saw blade that is hard to break A not... Read More

Curve cutting is smooth by adopting a vertical and horizontal licking improved blade. Uses an easy-to-grip pistol pattern. It is very convenient for wood work, drilling holes in outlet boxes, etc.

For cutting and drilling board materials such as wall boards and floor boards General wood, plywood, gypsum board, new building materials, siding materials

An easy-to-grip pistol pattern. The saw is thin and thick, and it is easy to cut a curve (pull it out in a curved shape). For wood work and drilling holes in outlet boxes.

A 150 mm size pull saw blade ideal for opening. With a sheath that is convenient for work while moving by attaching it around the waist or when storing it. Compatible with smart saw series blades. R-shaped grip that is easy to apply force. A safety rope can also be attached. Openings for gypsum b... Read More

A folding saw that can be stored compactly. The handle has a shape that is easy to grip and pull. With a ring hole to which a fall prevention strap can be attached.

For cutting out veneers and thin plates, and cutting into circles.

Spare blade type saw. There are 3 saw blades for board (coarse), woodworking (medium), and push-cutting. Freely adjust the blade length. A notch hole can be made with a drill at the tip. The blade has a hard chrome plating finish that does not easily rust.

For wood work and drilling holes in outlet boxes. Easy-to-grip pistol pattern saw The body is thin and thick, and it is easy to cut a curve (pull it out in a curved shape).