Locking Pliers

Curved chin standard vise pliers. For plumbing work, driver assistance, grinder work, etc. * Do not use for any purpose other than its intended purpose.

Ideal for fixing square iron materials, welding, soldering, and bonding. For clamping work in deep places. * Do not use for any purpose other than its intended purpose.

Two sizes are available to suit your needs. Curved grip. Ideal for clamping pipes and round objects. For plumbing work, driver assistance, grinder work, etc. With a cutter. Machine screw removal function. Add more vertical grooves to the vise pliers type! You can firmly grasp and fix the screws a... Read More

There is a 4-step adjustment groove on the chin, allowing quick mouth opening adjustment. Comes with a grounding cord. For clamping and holding of work.

The long chin makes it easy to work in narrow and narrow spaces. For detailed work in places where fingers cannot enter, such as tightening bolts and pulling out pins in narrow and narrow places. * Do not use for any purpose other than its intended purpose.

A vise-type screw Zaurus that you won't let go of when you eat it. It also supports truss screws and firmly bites into the screws. Uses an easy release mechanism that can be released easily and safely without lever operation. By adjusting the opening width, it can be used to fix various workp... Read More

A vise-type screw Zaurus that you won't let go of when you eat it. It also supports truss screws and firmly bites into the screws. Uses an easy release mechanism that can be released easily and safely without lever operation. By adjusting the opening width, it can be used to fix various workp... Read More

A vise plier that is convenient for sandwiching iron plates with a flat jaw. For sheet metal work such as positioning, bending, crimping, and straightening of sheet metal joints such as iron plates. * Do not use for any purpose other than its intended purpose.

A screw Zaurus with a vise function that locks and turns a crushed screw. Middle nose that can remove screws in deep places. With our unique patented technology, it is compatible with low-headed truss screws and firmly bites into the screws. The vise mechanism grabs the screw, so all you have to ... Read More

The opening in the center of the jaw enables welding and riveting at the joints of the workpieces it holds. For fixing when welding the flange part of piping * Do not use for any purpose other than its intended purpose.

The swivel pad at the tip is ideal for fixing irregularly shaped objects that are difficult to clamp (taper, etc.).

You can firmly fix pipes etc. with the curved jaw with teeth. Can be used as a wire cutter.

A long nose type that is convenient for work in narrow spaces. You can grab and turn machine screws, bolts and nuts. Can be used as a wire cutter.

The curved teeth are ideal for clamping round objects such as pipes. The straight part at the tip of the tooth can firmly hold thin small pieces due to the fine processing to prevent slipping. It can also be used as a wire cutter.

The curved teeth are ideal for clamping round objects such as pipes. The straight part at the tip of the tooth can firmly hold thin small pieces by fine processing to prevent slipping. As a non-stop wrench, you can turn the object while it is fixed. As a wrench for grinder work to assist the driv... Read More

Ideal for detailed work in places where fingers cannot enter, such as tightening bolts in narrow places and pulling out pins. For attaching and removing machine screws, for attaching and removing split pins, for holding small items

A versatile locking plier.

The long straight chin shape is ideal for work in narrow and confined spaces. It also has a shape suitable for precision work among locking pliers.

Wrap around and pinch and fix.

Demonstrates its power when turning a special chin shape and tanned nut. The special chin shape securely clamps the nut on three sides. It is also effective when turning tanned nuts. With wire cutter. * The total length L (mm) differs slightly depending on the position of the screw.

It can be used for cutting welding wires, etc.

Ideal for fixing square iron materials, welding, soldering, and bonding. You can avoid obstacles and clamp deep places.

Newly designed vertical groove that also supports truss screws. All the grips are diamond-shaped, and the screws are grasped by a total of three grips, fixed with a lock, and turned strongly. Since the grip part opens wide, it can be used with various screws and pipes. For removing crushed screws... Read More

With a cutter that cuts soft iron wire. Long nose size that easily fits in tight spaces. For sheet metal and welding work.

Stops gas flow up to 3/8 inch (9.53)

The opening can be switched to 4 steps, and the work is quick according to the work. If you switch the points and adjust the grip of the actual product with screws, you can fix it firmly just by grasping the grip. For sheet metal and welding work. For all hand vise work.

The main body is made of chrome molybdenum steel and is fully hardened to make it tough and durable. Comes with a cutter that cuts soft iron wire. Suitable for all hand vise work such as positioning.

Round and square timbers can be accurately aligned and fixed. In addition, the U-shaped jaw allows you to work while looking at the welded part.

The lower jaw automatically adjusts the clamp position to bring out more than three times the grip of standard locking pliers. The patented characteristic chin shape securely clamps various workpieces such as pipes, squares, and hexagons with multi-faceted contact. It is also suitable for grippin... Read More

Made of forged steel for high durability. For aircraft

Since the mouth opening is wide and the foot roller is deep, it is ideal for temporary fixing in deep places.

The large curved jaw shape is ideal for pipe removal / replacement work and automobile maintenance work (replacement of exhaust pipes, etc.).

Automatically adjusts to an appropriate mouth opening width with a simple operation of simply spreading and grasping. Convenient as a holder for temporary fastening, fixing, welding, and joining for sheet metal, welding work, factory maintenance, etc. The mouth width is automatically adjusted acc... Read More

The wide opening and deep jaw make it ideal for temporary fixing of angle channel steel.

Since the clamp part has a universal dish shape, it is ideal for holding inclined objects and delicate shapes.