Hydraulic Type
- Izumi Products Company Hydraulic Pipe Bender-Frame opening / closing type, lightweight pipe bender with special aluminum alloyfrom S$2,199.00Min. 3 days
- ESCO [1/4 Inch-7/8 Inch] Hydraulic Tube BenderFor annealed copper tube only *In air conditioner installation work, it is important to minimize the pressure loss of the refrigerant circulating in the system, to return the lubricating oil to the compressor, and to prevent the refrigerant from leaking during or after the installation work. *If ... Read MoreBending ability 1/4”・5/16”・3/8”・1/2”・5/8”・3/4”・7/8” Overall Length (mm) 307 Esco Part No. EA275H Mass (kg) body 2.2/set 6from S$1,299.00Min. 4 days
- Izumi Products Company Hydraulic pipe bender (manual / electric)Suitable Model PB-10N・PB-15Nfrom S$869.90Min. 2 days
- DIAMOND Double Rebar Wire TwisterA bending hacker that can be expanded and contracted with a push button. (695-1020mm) Reinforcing bar can be bent freely. The head angle is movable 180 degrees.Trusco Part No. 112-7532 Set Contents Private case Mass (kg) 3.4from S$159.90Min. 3 days
- TASCO Hydraulic bender reverse set (forward / reverse set)Since it is a hydraulic type, bending work is possible with little force.Overall Length (mm) 310 Suitable Material For annealed copper pipe only Suitable Size 1/4~7/8(6.35~22.23mm) Bending Angle 90 degree Case Dimensions (mm) 450×120×300from S$999.00Min. 6 days
- SUPER TOOL Hydraulic pipe benderComes with 3 types of attachments (vent shoes) according to the bending process. Built-in hydraulic cylinder. Suitable for bending 0 to 90 ° of gas pipes and thick stainless steel pipes.Bending Angle (Maximum / 1 turn) 90 ° Maximum Operating Pressure 70MPafrom S$1,399.00Min. 32 days
- SUPER TOOL Hydraulic pipe benderIdeal for thick stainless steel! Bending of thick-walled (JIS standard) stainless steel pipes, gas pipes, water pipes, and electrical equipment pipes (up to 90 °) Lightweight, compact and adherent. The simple structure makes it easy to move to the work site. By installing an attachment (bend shoe... Read Morefrom S$1,999.00Min. 22 days
- TASCO Reverse adapterReverse adapter for TA512H. The reverse adapter can be used for outward bending. Each size is available.from S$189.90Min. 6 days
- ENERPAC Bendingsch* We do not deliver to private homes (detached houses / apartments). * Depending on the delivery location, the delivery date may be postponed and additional shipping charges may be incurred.from S$1,099.00Min. 33 days
- Osaka Jack Pipe bender for power jackSince the upper frame can be moved backward, the pipe can be easily inserted and removed. A beautiful bend can be obtained by cooling work. A curved tube with little deformation can be obtained. Lightweight and strong structure using special aluminum for the frame and pending shoes. A gauge bar (... Read MoreMaximum processing diameter (Φmm) 60.5 Suitable Jack E15S25 Recommended pump TWA-0.7、NEX-2、GH-1/2from S$3,299.00Min. 11 days
- TASCO Hydraulic benderSince it is a hydraulic type, bending work is possible with little force.Overall Length (mm) 310 Case Dimensions (mm) 450×120×300from S$879.90Min. 6 days
- TASCO Hydraulic bender reverse set (forward / reverse set)Since it is a hydraulic type, bending work can be done easily with a small amount of force. Can be bent from 1/4 "to 7/8" copper pipes. Uses a light and durable aluminum die-cast shoe. It can also be bent outward by using a reverse adapter. Comes in a resin case that is convenient to ca... Read MoreSuitable Material For annealed copper pipe only Case Dimensions (mm) 450×120×300 Suitable Size 1/4~7/8(6.35~22.23mm) Bending Angle 90 degree Overall Length (mm) 310Discontinued
- SANKO Two bicycles vertical pole standDimensions at Use, Width W x Depth D1 x Height H1 (mm) (Maximum) 850 x 850 x 1200-2200 Storage Dimensions (width W x depth D x height H) (mm) 100×100×1200 Trusco Part No. 162-0030 Allowable Load 20 each Mass (g) 7340Discontinued
- TASCO Hydraulic benderSince it is a hydraulic type, bending work can be done easily with a small amount of force. It can be bent from 1/4 ″ to 7/8 ″ copper pipe. Uses a light and durable aluminum die-cast shoe. It can also be bent outward by using a reverse adapter. Comes in a resin case that is convenient to carry. T... Read MoreSuitable Size 1/4″ ~7/8″(6.35~22.23mm) Bending Angle (Maximum) 90 ° Overall Length (mm) (Body) 310 Case Dimensions (mm) 450× 120× 300Discontinued
- Taiyo Engineering TAIYO Manual hydraulic benderSmall, lightweight and easy to carry. It is a manual hydraulic type and can work anywhere. It has excellent operability and few failures. Excellent functionality and power. For pipe bending work such as shipyards, chemical industry, hydraulic and pneumatic machinery, electrical construction work,... Read MoreMass (kg) 14 Pipe diameter [Maximum bending] SGP25AG28C31 Maximum Operating Pressure (MPa) Manual pump: 72 Trusco Part No. 852-3008 Effective stroke (mm) 140 maximum bending angle at one time bending (°) 90Discontinued