Pipe Threaders

Since no power supply is required, the range of action is not limited. The hammer holder has a high height and can be drilled in place even after bar arrangement. Unlike electric drills, metal cutting pieces do not come out. * After using the tool, attach a protective cap to the edge of the punch... Read More

Since it is a manual type, no power supply is required. If the holes are in the same position due to multi-stage suspension, etc., you can use the abutment gauge to make accurate and quick holes. MAKD-H is a type that does not come with a mold. You can purchase and use a replacement mold that sui... Read More

Ratchet type manual screwdriver. Lightweight aluminum body. For steel pipes only (rising pipes are not possible) A ratchet type thread cutting machine that is ideal for expansion and repair work of existing pipes.

For steel pipes (outer surface lining pipes are not possible). Die head with chaser exclusively for Supertronic and Hand Threader. Die head with chaser exclusively for Supertronic.

It can be cut without crushing the thread, so it can be used immediately. There are two types of blade sets: 1 size type and 2 size type. Cutting of hanging bolts for ducts, anemones, etc. Cutting of hanging bolts for lightweight steel ceiling base materials. * Replacement blade sold separately

Since it is a load distribution type, it can be cut with a very light force in 2 actions. Ideal for cutting hanging bolts for air conditioning, conduits, water supply and distribution, electric pipes, ducts, anemos, etc. W3 / 8 ”(mild steel) does not damage the thread and cuts cleanly. There is n... Read More

It can be easily threaded without using a power supply. Excellent durability with a ratchet.

You can easily thread without using a power supply. It is a ratchet type and has excellent durability. 4-flute type.

Since no power supply is required, the range of action is not limited. The hammer holder has a high height and can be drilled in place even after bar arrangement. Unlike electric drills, metal cutting pieces do not come out. * Due to environmental friendliness, the plating process will be changed... Read More

A lightweight, power-free manual tool that can be used anywhere. The cut end is clean without crushing threads or burrs, so the cut bolt can be used as it is. Spare blade type

Lightweight, compact design, power-free manual tool that can be used anywhere. Outstanding sharpness and durability where the technology of MCC, the top brand of cutting tools, lives. Due to the unique blade shape and unique mechanism, a clean cut can be used as it is through the nut without trou... Read More

Groove roll for 50A-150A Sch.10 steel pipe, thin-walled stainless steel pipe, 50A-90A Sch.40 steel pipe. Comes standard with the 915 manual roll groover (88232).

A dedicated tool for easy and speedy countersinking (Φ6) on FL steel plate and FL stainless steel plate. steel plate punch

For thread cutting of water pipes and gas pipes

200A-300A Sch.10 steel tube, thin wall stainless tube, groove roll set and drive.

Since no power supply is required, the range of action is not limited. The hammer holder has a high height and can be drilled in place even after bar arrangement. Unlike electric drills, metal cutting pieces do not come out. * Due to environmental friendliness, the plating process will be changed... Read More

The motor with a double insulation brake is adopted. (NS50, NS80, F80) A cone-shaped reamer with little biting. (NS50, NS80, F80) Threading of water and gas pipes

100A-150A Sch.40 steel tube, thin wall stainless tube, groove roll set and drive.

A tool for processing and drilling countersunk holes in PVC-coated steel plates. Boring machine for Lonseal industrial steel plate *Punch holes are exclusively for BP steel plate, LS steel plate, and LSS steel plate manufactured by Lonseal. *Do not use for drilling anything other than PVC steel p... Read More

Manual roll groover for existing pipes. A gap of just under 9 cm around the pipe is sufficient for grooving. A minimum of 7 cm of exposed piping can be processed. By selecting an appropriate roll set, groove processing can be performed on pipes of 32A to 300A (best processing range in its class).... Read More

For thread cutting of water pipes and gas pipes

32A-40A Sch.10 or 40 steel pipe, thin wall stainless steel pipe, groove roll set and drive.

Manufacture of simple bolts such as right-handed anchor bolts and ceiling bolts. Manufacture of bolts and screws equivalent to rolled steel (SS material) for general structures. Manufacture of bolts and screws equivalent to steel bars (SR material) for reinforced concrete.

Since no power supply is required, the range of action is not limited. The hammer holder has a high height and can be drilled in place even after bar arrangement. Unlike electric drills, metal cutting pieces do not come out. * After using the tool, attach a protective cap to the edge of the punch... Read More

You can easily thread without using a power supply. It is a ratchet type and has excellent durability. 2-flute type.