Pipe Cutters
A plumbing cutter is a tool for cutting copper, aluminum, stainless steel and plastic pipes during plumbing. Plumbing cutters equipped with braided metal blades, such as alloys, often use a ratchet mechanism, and are characterized by the ability to cut thick pipes with less force. The handle type tube cutter is recommended when you want to cut metal such as copper tube. If the sharpness deteriorates, there is a replaceable blade type, so it can be used economically. Choose an item depending on the material of the pipe you want to cut.
Other Related Pages
MonotaRO Pipe CutterAluminum, copper pipes and PVC pipes can be cut by tightening and turning the handle. It can be cut without producing chips. * Please note that the tip of the spare blade and the cut end of the cut pipe are sharp, so there is a risk of damage if you touch them directly with your fingers. * Do not... Read More- SK (Niigata Seiki) Pipe cutterReliable cutting without chips is possible. The cut surface can be finished with a deburring cutter. Cutting of pipes such as copper, lead, iron, aluminum, PVC pipes, stainless steel, etc. * For stainless steel, please purchase a spare blade for stainless steel, which is sold separately.Thickness (mm) 34 Included Accessories 1 replacement blade (for general use) Specification With deburring cutter Maximum cutting thickness (mm) 2.5
-
- Rex Industries Cutter Replacement Blade for Stainless Steel TubeSpare blade for Rex pipe machine For stainless steel pipeTrusco Part No. 122-9222 Mass (g) 50
- KEIBA Handy protector molding cutterA special tool for cutting resin wiring moldings. For right angle, 45 degree cutting. The one-touch mechanism allows opening with one hand. The blade will not open unless it is released with a safety stopper. Replaceable blade type that can be easily replaced. Lightweight type made of aluminum al... Read MoreDimension C (mm) 51 Dimension D (mm) 18 Overall Length (mm) 317 Dimension A (mm) 317 Dimension B (mm) 104 Material Aluminum alloy Cutting Capacity Up to 100mm Mass (g) 670from S$249.90Min. 2 days
- RIDGID (Emerson Japan) Tube cutter for thin wall tube 15Trusco Part No. 495-0712from S$99.90Min. 4 days
- Virax Tube cutter for plastic pipeA replacement blade for tube cutters for plastic tubes. A high quality tube cutter made in France. Three rollers provide excellent workability. For plastic tubes.2018 Trusco page 4 1349 Trusco Part No. 856-2029 Mass (kg) 1from S$679.90Min. 32 days
- Virax Replacement blade for PVC pipe cutterA spare blade for a PVC pipe cutter 42 mm.2018 Trusco page 4 1337 Mass (g) 100 Trusco Part No. 856-2004 Suitable Model 215042from S$67.99Min. 3 days
- MCC PVC CutterEasy and fast, quick cut. Clean cutting and clean cutting that does not generate any chips. Outstanding sharpness, beautiful cut, quality cut.
- MonotaRO Molding cutterCorner cut of resin molding is possible !! The angle can be adjusted in 4 steps. (90, 75, 60, 45 °) Can cut up to 20 mm for moldings, hoses, raw wood, ropes, etc. * Do not use for anything other than its intended purpose.Mass (g) 410 Maximum opening diameter (mm) 55 Blade Length (mm) 70 Angle Adjustment Range 90、75、60、45° Width (mm) About 102 Overall Length (mm) About 222 Overall Height (mm) About 60
- MonotaRO Tube cutter miniAluminum, copper pipes and PVC pipes can be cut by tightening and turning the handle. It can be cut without producing chips. Cuttable wall thickness: Stainless steel (up to 1 mm), aluminum / copper pipe (up to 2 mm), brass (up to 1.5 mm), PVC (up to 3 mm) * Please note that the tip of the spare b... Read MoreMass (g) About 111 Applicable Pipe Diameter (inch) 1/8～7/8 Suitable Pipe Diameter (Φmm) 3～22 Overall Length (mm) About 64
- SUPER TOOL Tube Cutter [for Copper, Aluminum, Hard PVC Pipe, Steel Pipe, Thin Stainless Steel (1mm or Less)]Excellent sharpness with no chips. The cut is refreshing.Replacement Blades TCC 105E
- MonotaRO PVC cutter V-shaped blade typeUses a V-shaped blade to easily cut hard PVC pipes! In addition, the ratchet mechanism makes it easy to cut. The one-touch open function allows speedy opening and closing. Cutting the envelope pipe. Wiring protector molding disconnection. * If you forcibly cut a material other than the compatible... Read MoreOverall Length (mm) 225 Mass (g) 410 Cutting Capacity (Φmm) 45 (maximum)
- MonotaRO Spare blade tube cutter for pipeAs a replacement blade for tube cutters * Please note that the tip of the spare blade is sharp, so there is a risk of damage if it comes into direct contact with your fingers. * Do not use for any other purpose. Please note that incorrect use may cause an accident.Outer Diameter (Φmm) 18.5
-
- MonotaRO Tube Cutter Quick Setting TypeA tube cutter with excellent workability that allows you to set the start of cutting with a single touch. The burrs after cutting can be finished with the attached deburring cutter. Cutting iron, copper and aluminum pipes * Do not use for any purpose other than its intended purpose.Mass (g) 380 Pipe Diameter (Φmm) 6～50 Thickness (mm) 36 Included Accessories Spare blade for general use x 1 Overall Length (mm) 177 Overall Width (mm) 75 Maximum cutting thickness (mm) 3.5
- SUPER TOOL Replacement Blade for Tube CutterThe material of the cutter foil is special alloy steel, and the optimum heat treatment realizes sharpness and tough durability.
- SUPER TOOL Bearing Fitted Tube CutterScut from stainless steel pipes to copper pipes! For stainless steel, steel, copper, aluminum, brass, hard PVC pipes
- SUPER TOOL Stainless Steel Flexible Pipe Cutter (For Single Mountain Corrugated Pipes)● No chips and excellent sharpness. The cut is refreshing. ● The cutter wheel is made of special alloy steel and is heat-treated optimally to achieve further sharpness and toughness. ● For cutting stainless flexible pipes (single mountain corrugated pipes) and coated flexible pipes.
- SK (Niigata Seiki) Pipe cutter one-touch lock typeThe starting point of cutting can be set with a single touch, and the cut surface can be finished with a deburring cutter that is excellent for workability. Strong type with maximum cutting capacity of 3.5 mm Cutting of pipes such as copper, lead, iron, aluminum, PVC pipes, stainless steel, etc. ... Read MorePipe Diameter (Φmm) 6～50 Thickness (mm) 38 Maximum cutting thickness (mm) 3.5 Mass (g) 380 Specification With deburring cutter Included Accessories 1 replacement blade (for general use) Overall Width (mm) 70 Overall Length (mm) 175
- SK (Niigata Seiki) Pipe Cutter Replacement BladeExcellent sharpness Please use according to the main bodyThickness (mm) 6
- SUPER TOOL Bearing Tube Cutter Replacement BladeStainless steel, steel, copper, aluminum, brass, hard PVC pipe
- SUPER TOOL PVC CutterOne-action opening mechanism (when the handle is fully extended, the blade automatically opens to the maximum). The ratchet mechanism makes it easy and speedy to cut with one hand. Excellent sharpness with no chips. The cut is refreshing. The VK42N can be cut diagonally at 90 ° and 45 ° for wirin... Read MoreMaterial Aluminum alloy Finish Champagne gold baking finish
- GISUKE (Takagi) Single pipe / scaffolding pipe cutterCan cut stainless steel pipes! HSS blade. Scaffolding single pipe can also be cut. Built-in deburring knife. For cutting stainless steel, steel, copper, brass, aluminum and PVC pipes. * The attached spare blade is SB-6222HS (11-19456)Maximum Cutting Capacity (mm) (Thickness) 4 Cutting Capacity (Φmm) 16～50 Material (Handle) Aluminum Material Aluminum Material (Blade) HSS
- TRUSCO Tube CutterIt is a thin blade strong type and has excellent sharpness. Great for cutting in tight spaces. For cutting copper, aluminum, brass, and hard PVC pipes.Overall Length (mm) 67 Cutting Capacity 3 / 16-7 / 8 inch (4-22mm) Wall Thickness (mm) 3 Specification Standard replacement blade GFC-15NC Trusco Part No. 416-2668 Mass (g) 126
-
- TASCO Stainless steel tube cutterIt can also cut iron pipes and stainless steel pipes. Comes with 1 spare blade. Standard mounting blade (TA560AS-1)Wall Thickness (mm) (Maximum) 3 Applicable copper pipe diameter 1/8″～1-1/4″(3.18～31.75mm) Overall Length (mm) 128
- SUPER TOOL Tube Cutter (For Copper, Aluminum, Brass, Hard Pvc Pipe)Excellent sharpness with no chips. The cut is refreshing. TC205 has a built-in chamfering knife and spare blade.
-
- SUPER TOOL Frepoly CutterCut soft resin pipes such as resin flexible pipes, sheath pipes, polybuden pipes, etc. quickly! By mounting the blade in reverse, it can be used twice and is very economical. Non-slip grooved grip.Mass (g) 155 Trusco Part No. 321-6489 Material Aluminum alloy Finish Champagne gold baking finish Cutting Capacity (Φmm) Φ38 or less
- TRUSCO Tube cutterIt is a thin blade strong type and has excellent sharpness. The knob has a spare blade (GFC-111NC 1 piece). For cutting copper, aluminum, brass, and hard PVC pipes.Cutting Capacity 1/8 to 1 1/4 inch (3 to 32mm) Overall Length (mm) 130 Trusco Part No. 416-2676 Wall Thickness (mm) 3 Specification Standard replacement blade GFC-111NC Mass (g) 261
- KTC Ratchet Pipe Cutter (Steel Pipe for Stainless Steel Pipe)The automatic feed mechanism keeps a constant feed amount (force) and does not apply excessive force. The handle swing angle is 8 ° and cutting is possible. Great for cutting in tight spaces. By adopting a ratchet mechanism, it is possible to cut easily and quickly even in a narrow space. The bod... Read MoreStainless Steel Pipe Max. Wall Thickness (mm) 3.0 Specification Standard replacement blade: PCRK-FS
- GISUKE (Takagi) Pipe cutter spare blade HSSFor cutting stainless steel, steel, copper, brass, aluminum and PVC pipes.Type For Stainless steel Material (Blade) HSS
- MCC Resin tube cutterThe cutting blade uses a V-shaped edge that is easy to cut. The V-shaped edge suppresses the deformation of the tube and has a beautiful finish. Easy to operate, quick cut like scissors. A palm-sized lightweight and compact design that anyone can cut easily and quickly. Spare blade typeOverall Length (mm) 190 Mass (g) 220 Trusco Part No. 342-8303 Replacement Blades JTCE37
- JOB Master Molding cutterCorner cut is possible! 90 degree, 45 degree left and right cut with molding guide Highest grade blade steel used (SK-5) Fluororesin processed anvil type Cutting up to 20 mm for moldings, hoses, raw wood, ropes, etc.Overall Length (mm) 205 Mass (g) 280 Blade Length (mm) 45
- DeniMan DM single tube cutterCutting of pipes such as lead, iron, stainless steel (using a spare blade for stainless steel sold separately), aluminum, PVC, etc. On the side, burrs formed at the cut end of the pipe after cutting can be scraped off with a chamfering knife. For cutting Φ16mm-50mm. * The attached blade is for co... Read MoreMaterial Aluminum die-cast
- DeniMan DM single tube cutter spare bladeTC-50C is a genuine TC-50 blade. TC-50CH is a high-speed steel blade recommended for those who cut a lot of stainless steel.
- HIT PVC cutterOne-touch open function! The body is even lighter and more compact! Tool-free replaceable blade exchange typeOverall Length (mm) 235 Mass (g) 385 Maximum Cutting Capacity (mm) 42 Recycled paper use mark Conformity RoHS directive (corresponding to 10 substances) Correspondence
- Imperial Spare blade for tube cutterSuitable Model Tube cutter Dimension b (mm) 5 Dimension a (mm) 17.1 Dimension c (mm) 6
- MonotaRO Spare blade PVC cutter for V type blade* Do not use for anything other than its intended purpose.Material Carbon tool steel (SK5) Suitable for MV-45
![Tube Cutter [for Copper, Aluminum, Hard PVC Pipe, Steel Pipe, Thin Stainless Steel (1mm or Less)]](https://jp.images-monotaro.com/Monotaro3/pi/middle/mono35195465-100917-02.jpg)
