Bit Holders

You can easily magnetize and demagnetize the tip of a screwdriver or hexagon wrench. * Please note that some metals cannot be magnetized due to their nature. * Since it is a simple tool, it may not be possible to completely demagnetize it. * Since this product uses permanent magnets, do not use i... Read More

The tip of a screwdriver, hexagon wrench, etc. can be magnetized and demagnetized. Easy to use. Just insert the tip into the main body and rub it.

You can magnetize and demagnetize rod-shaped iron products such as driver shafts. You can demagnetize by sliding the shaft through the hole on the DEMAGNETIZER (-) side, and magnetize by sliding it through the hole on the MAGNETIZER (+) side.

Strength is increased with an iron holder and impact resistant cap. Opposite side 6.35 It can be used as a hexagonal shaft bit (total length 45 mm or more) or as an extension of a drill. For extension of bits and drills

A holder with a carabiner hook that is convenient for carrying and organizing frequently used tip tools (opposite side 6.35 mm). Since it is 5 colorful colors, you can check the type and size at a glance. 6. For carrying 35-axis bits and sockets *Please do not use it for anything other than its i... Read More

For screw-driving in hard-to-reach places and deep places! With a thin shaft with a maximum shaft diameter of 14 mm, it is ideal for screw-driving deep and in narrow spaces.

Easy to use because the sleeve is pushed down and pulled out when the bit is attached or detached. Storage of hexagonal screwdriver bits and sockets

The bits do not come apart and are convenient for storage. For bit storage.

Can store 10 C6 / E6 bits

A bit with a hexagonal opposite side of 6.35 mm can be inserted, and it quickly changes to a long type. You can work in a stable posture by putting your hand on the rotating grip. For tightening screws in high places and places where it is difficult to enter near obstacles.

The tip can be magnetized simply by attaching it to the shaft of the screwdriver. It can also be attached to bits of different sizes and shapes. Since it is movable, it supports Φ4 to 6.35 axes! When you don't want to drop the screw. When turning a long screw.

The electric bit can be stored to prevent the bit from being lost. It can be easily attached to the belt. For bit storage and loss prevention

Make a bite groove in the hexagon socket head cap screw and hexagon socket head set screw that have been tapped and tanned. Use with a mini-impact screwdriver to remove the tanned hexagon socket head cap screw and hexagon socket set screw.

The strong magnet does not drop the screw. *Cannot be used with thin round bits or bits with a length of 45 mm. * Drivers with diameters of Φ6.36 or larger and some flathead drivers may not fit. *There are 5 colors, yellow, pink, red, blue, and yellow green, but you cannot choose.

You can hold the bit with a magnet. It can be attached to the replacement handle and used to extend the bit.

It can be changed according to the work situation such as narrow places and deep places. Since the structure is such that magnetic force is applied to the tip of the bit, it is also convenient for holding screws and screws.

Catch firmly without dropping screws with a strong magnet. Mug catch for L-shaped adapter and ultra-short pit tool.

A set of 3 colors of blue, red, and black ● Safety design that does not come off unless the slide part is pulled up ● The insertion part is a round hole so you can "quickly put it in and out" 6.35 Axis Bit Socket Carrying * Do not attach sharp objects such as ironworking drills and pilo... Read More

Convenient to carry a screwdriver or socket bit! Easy to put on and take off with a one-touch slide!

* Bits are not included.

With a firm grip, it is soft and just fits in your hand, making it easy to use. It can be used for bundling pet reeds and shopping bags, and for use in the field.

It catches firmly without dropping the screw with a strong magnet. Ideal for stepped bits. The magnet force of the electric bit driver shaft is increased.

Firmly grasp the stainless steel screw that does not have a magnet.

Replaceable bit holder Bit holder

Ideal for screwing gypsum board. The screw stops at a certain depth. With a resin cover that is gentle on the board surface. Catch the screw firmly with a strong magnet.

Made of aluminum, the lightweight sleeve is pulled up and attached / detached Convenient to carry hexagonal shaft tip tool

With a firm grip, it is soft and just fits in your hand, making it easy to use. It can be used for bundling pet reeds and shopping bags, and for use in the field.

It can be attached to an electric charging screwdriver and is ideal for work in places that are out of reach. The grip position can be changed according to the work, and stable screwdriver can be performed without the shaft shaking. It can be attached to an electric charging screwdriver and is id... Read More

Just attach it to the bit and it will strongly absorb the screw. It can also be used as a magnetizer just by inserting it with strong magnetic force. The direction of the lines of magnetic force is constant and a strong magnetic force is generated in one direction. Magnetizing device for driver b... Read More

If you use the original 3-hole plate, you can always organize it properly! The tools are always messed up when you carry it! I can't get the size I need !! This kind of trouble is solved in one shot! The tools are lined up neatly and work is easy! Adopting a 3-hole plate made of polycarbonate... Read More

The strong magnet does not drop the screw. You can weaken the magnetic force by rubbing the bit several times on the flat surface of the mug catch. The expansion and contraction function fits the bit. Ideal for increasing the magnetic force of drivers and electric bits. Catch firmly without dropp... Read More

Bit holder for impact. You can use it as an electric screwdriver just by attaching it to a tool with a square insertion angle. Ball lock type: Holds the bit with a steel band and band. * Securely fix the pins and rings to the tool. If any abnormality such as deformation, wear or deterioration is ... Read More

It can be magnetized and demagnetized. The round shaft can support up to 8 mm and the hexagonal shaft can support up to 6.35 mm. Ideal for increasing the magnetic force of drivers and electric bits. Catch firmly without dropping the screw. * Keep away from electronic precision equipment and magne... Read More

Convenient to carry driver bits and socket bits! Easy to put on and take off!

Drill chuck bit replaceable holder Reverse screw for fixing ANEX Bit Replaceable Drill Chuck Series Dedicated Holder Fixing Reverse Screw (Replacement Part) * If the bit exchange type drill chuck is reversely rotated and overloaded, the screw that secures the internal holder may be damaged. In th... Read More

Small magnetism. It can be attached to a screwdriver or hexagon wrench to work without dropping screws or bolts.

The screw always stops facing. Since the screw catch is completely locked with the bit by the automatic lock function, the protruding dimension of the bit does not change when using an impact driver. Even with long screws, you can firmly grasp it with a strong magnet and easily screw it. Work to ... Read More

adapter handle. Bits can be easily replaced with one hand.