Cable Cutters

Cut cables (VCT, IV wire, etc.) that are difficult to cut into a round shape with a light force!

A cutter for copper wire cables. It is light, can be worked with one hand, and can be cut cleanly without deformation of the cut surface. The cable cutter's induction hardened blade is hard, has a sharp blade, and maintains excellent sharpness. * For copper wire only

It is convenient because it is a ratchet type. It is used for general electrical work, substation equipment work, communication line laying work, etc. Suitable for work such as CV / IV / SV (VVR). * Do not cut the live line. There is a risk of electric shock. * The handle is not an insulator. The... Read More

A tool dedicated to cutting cable lines for telephone work, etc. It can also be used for cutting rubber, urethane, etc. rods and pipes.

Even IV22mm 2 can be cut lightly and cleanly with one hand.

Reliable quality produced by an integrated production method that uses special-purpose steel and performs everything from forging materials to processing, heat treatment, and assembly in-house. The blade has a unique shape that matches the material (cable) to be cut, and the clean cut makes it ea... Read More

Uses a serrated blade that prevents the cable from escaping. A groove dedicated to deburring is provided on the back of the blade to remove curved and straight burrs. Elastomer grip that is hard to slip and gives power. With a stopper that can be locked with one hand. High carbon cutlery steel ca... Read More

The blade uses precision forged special steel for blades. The triangular cutting method has been further improved to make it easier to cut thick wires, and the roundness of the cable is not changed. Since a special aluminum alloy is used for the handle, the total mass is very light. Therefore, no... Read More

Small cable cutter (for copper wire), IV-60sqOK !! Excellent sharpness !! Can be easily stored in a pliers sack (ND-941) * Pinch sack is sold separately.

It is small and lightweight. Forged blade is used. The movable blade can be reversed. Cutting cross-linked polyethylene power cables, vinyl insulated wires, etc.

It can be used with a light force and a small handle opening by adopting a booster structure. For cutting work in general electrical work, power transmission line work, substation equipment work, and communication work.

Ergonomic design reduces handle load! Light and short, you can work with one hand, which is convenient for work in high places and narrow places. It cuts cleanly without deforming the cut surface of the cable, and maintains excellent sharpness. Cutting the copper wire cable * For copper wire only

Sharpness is improved with a special steel blade. Excellent durability. Sharpness 30% UP (compared to conventional manufacturers) Easy cutting with ratchet type. Uses an elastomer molded grip that is easy to grip and operate. * For copper wire only.

It can cut single and composite wires of copper and aluminum. The blades are precision polished and hardened. It can be cut cleanly without deforming the cable. With a design that makes the best use of the principle of leverage, it demonstrates high cutting ability with less force. The screw join... Read More

Cables (VCT, IV wire, etc.) and stranded wires can be cut with a light force. For cutting cables (VCT, IV wire, etc.). * It is a non-insulated tool. Please turn off the power before use. Please do not use it for any purpose other than its intended purpose.

You can cut the communication 20mm cable with one hand. At the beginning of cutting, the fulcrum is separated from the blade to cut the soft coating, and a thick cable is sandwiched between them. During cutting, the fulcrum approaches the blade, so the copper core can be cut powerfully.

Strongly cuts cable wires with a sharp blade. It is a beautiful cut.

It can be used with a light force and a small handle opening by adopting a booster structure. For cutting work in general electrical work, power transmission line work, substation equipment work, and communication work.

Cuts quickly! Cuts 14mm 2 IV wires easily! VVF2.0 × 3C can also be disconnected With 3 size strip function () Compact size that is easy to store with a spring that does not tire your hands even during continuous work For copper wire only

Lightweight using aluminum pipe for the handle. In addition, it is anodized and very beautiful. The blade uses precision-made special steel for blades. Chromium molybdenum steel is used for the blade bolts, so the center nut does not loosen and there is no play. Cutting IV wire, VVR wire, rubber,... Read More

Excellent sharpness and durability due to the use of special steel. For cable line cutting work such as electrical work. For cutting small diameter resin pipes.

It can be cut cleanly without deforming the cut surface. For copper wire only

You can cut plastic, rubber, soft wood, and ribbon cables up to 56 mm wide without crushing the cut surface. The cut guide allows you to cut the cable at angles of 45 °, 60 °, 75 °, and 90 °. Replaceable trapezoidal blade. With an open spring that is convenient for repetitive work and a lock that... Read More

Cut the wires cleanly with a light force without letting them escape! It can be cut cleanly with a light force. For cutting VCT line, IV line, VVF line, coaxial cable, etc.

Achieves weight reduction with an aluminum handle! Excellent mobility and supports electrical construction work!

You can cut and peel the cable with one.

Since the shape of the blade is lengthened to match the flat WF, 2.6 mm x 3 cores can be cut with a light force.

The power is transmitted to the maximum by the principle of leverage. Newly developed efficient blade shape. It can cut cable ducts and plastics up to 4.0 mm thick.

Ribbon cables up to 56 mm wide can be cut without crushing the cut surface. The cut guide allows you to cut the cable at a right angle. Replaceable trapezoidal blade. With an open spring that is convenient for repetitive work and a lock that allows you to keep your mouth closed when storing. Hand... Read More

It can cut single and composite wires of copper and aluminum. The blades are precision polished and hardened. It can be cut cleanly without deforming the cable. You can easily work with one hand. The screw joint is adjustable. With open spring. Very sturdy due to the forged body. The material of ... Read More

Sharpness is improved with a special steel blade. Durability is outstanding. Easy cutting with ratchet type. Compact size that is easy to put in a waist bag. For copper wire only. Uses an elastomer molded grip that is easy to grip and operate.

It can cut single and composite wires of copper and aluminum. It can be cut cleanly without deforming the cable. The ratchet mechanism allows one-handed operation. The cable can be easily cut by the 2-step ratchet mechanism. The lightweight and compact design makes it easy to handle and can be us... Read More

Ideal for cutting cables. It can also be used for twigs, rubber, ropes, etc. With a one-touch stopper, it can be stored easily. Cutting the cable line for electrical work. Cutting twigs, rubber, ropes, etc.