Crimping Tools

Professional tool for cutting and stripping telephone ribbon cables. Since the force is applied in parallel, it can be securely crimped. Equipped with a cutter for cutting 6 mm and 12 mm in length and a knife for disassembling the cable. For Western plug crimping

For mounting bare terminals and PB sleeves. For mounting bare terminals and PB sleeves * Please do not use it for any other purpose. * 0.5 / 1.25 / 2 / 3.5 / 5.5 is a Japanese standard. * 0.5 / 1.5 / 2.5 / 4.0 / 6.0 is a German standard.

The steering wheel operation is also extremely light. The molding confirmation mechanism is built into the main body, and the collar is refreshing. The handle is narrower than the conventional product. Therefore, it is easy to temporarily hold the terminal with one hand. For bare crimp terminals ... Read More

A pocket size that fits softly in your hand with a lightweight and compact design. Powerful crimping with a small body. Handle load reduced by about 50%. (2mm 2 compared to conventional) Erimoto is refreshing. Molding confirmation mechanism built into the main body. For bare crimp terminals and b... Read More

It is a tool that can smoothly crimp without damaging the terminal when installing the crimp terminal. After crimping, the size of the die used is stamped on the terminal. For electrical work and wiring work * The size of JIS standard and DIN standard is written on the main body.

The die has a high precision and thin finish comparable to that of a special tool, making it ideal for crimping extremely small pins. High-precision crimping is possible for both the core wire and coating. The grip uses an eco-friendly elastomer. Has excellent oil resistance. With a strap hole th... Read More

CE1 / CE2 and CE5 can be crimped. In addition, it is very compact and can be crimped with a light grip. An elastic, soft-touch, hand-friendly elastomer grip. You won't get tired of continuous work.

Lightweight, compact and robust Crimping terminal with insulation coating. sleeve * Do not perform live-line work. * Check the compatible size with the electric wire. * Apply load until the handle opens.

Lightweight, compact and robust Bare crimp terminal sleeve * Do not perform live-line work. * Check the compatible size with the electric wire. * Apply load until the handle opens.

Arm swager is a crimping tool for arm and oval sleeves. Description: With cutter

Since it is a small and lightweight type, you can easily perform crimping work with one hand. For terminals and sleeves with insulation coating * Please do not use it for any other purpose. * Please use the correct wire connector and wire. * Do not crimp live wires or work in the vicinity as ther... Read More

A must-have tool for the electrician skill test !! The handle is narrower than the conventional product. About 20 cm when opened For ring sleeve (E)

For insulated closed terminals. CE1, CE2 and CE5 can be crimped. For insulated closed terminals * Please do not use it for any other purpose.

Die shape that firmly holds the wire coating. The handle opening amount adjustment mechanism enables work with a small opening width. * Notes for J.S.T.Crimping Terminal Manufacturing and Fuji Terminal Industry When the terminal name is 0.5 and the wire size is 0.2 to 0.3mm 2 , select the die acc... Read More

Suitable for processing small contact pins (The die part is stepped and thinly finished)

By improving the toggle mechanism, the required grip strength per unit stroke is suppressed and female-friendly operability is realized.

With molding confirmation mechanism JIS C 9711 compliant product Recommended product for electrician proficiency test After crimping, the size of the die used is marked on the terminal. For ring sleeve only

With 15 types of dies, this one supports a wide range of terminals. By adopting a toggle mechanism, reliable crimping with a light force. Elastomer grip is used to prevent fatigue. Crimping tool for open barrel type contacts

Lightweight, compact and robust Closed end connector with insulation coating * Do not perform live-line work. * Check the compatible size with the electric wire. * Apply load until the handle opens.

Approximately 15% lighter! Grip width approximately 25% slimmer and easier to use! (Compared to conventional manufacturers) Targeting quality that exceeds JIS! Replaceable ratchet gear adopted (PAT.P) 1 can support 4 sizes of terminals with hanging holes For bare terminals and PB sleeves

A multifunctional crimping plier that can handle 6 types of work with one. Cutting wires, crimping open barrel terminals, crimping bare terminals, cutting machine screws, crimping insulated terminals, stripping wire coatings * Please do not use for any other purpose.

The caulked part is a forged product of special steel and heat-treated to pursue durability. There is no gap in the ridge of the crimping part so that it can be crimped securely on the left and right crimping parts. The handle can be securely crimped with a toggle mechanism. It also has a wire ro... Read More

You can cut cables, strip wires, and crimp insulated terminals. There are holes for cutting M2.6, 3, 3.5, 4, 5 copper and brass screws. The screw type joint enables high stability and even movement. The handle has a plastic cover made of multiple materials. * The comfort handle (this product) is ... Read More

Lightweight and compact design, it is a pocket size that fits softly in your hand. Built-in molding confirmation mechanism. Crimping of closed terminals with insulation coating.

The grip extends to the top for easy grip and easy to use with one hand! (JIS standard product) Lightweight, compact, and easy crimping with a small force! Crimping mark For E-type ring sleeve (VA sleeve)

For waterproof crimp detection (SR) and waterproof crimp connector (SB) only

A connection tool that crimps and connects wires using bare crimp terminals for copper wires and wire connectors for bare crimp sleeves for copper wires. * Please use "3.5" for 214A and 5N18 at "5.5" (the product does not have 3.5).

A pressure regulation device (ratchet) is attached to prevent insufficient crimping. For connecting crimp terminals to electric wires

The center contact and sleeve (retaining ring) can be crimped. With molding confirmation mechanism. (With release lever) A crimping tool for BNC / TNC / BNCC connectors used for measuring instruments and computer LANs.

Crimping work can be done even in narrow places. It is a short handle with a total length of 200 mm. Crimping tool for waterproof pin terminals and waterproof B sleeves (TMNB, PC type).

A must-have tool for the electrician skill test !! Uses lost wax (precision casting). A light, robust and easy-to-use tool. Reliable, easy and speedy crimping! For ring sleeve

For bare terminals and PB sleeves

Corresponding to the establishment of JIS standard for insulated closed terminals (CE type), the energization performance of JIS terminals can be fully demonstrated. For closed-end connector with insulation coating

For bare crimp terminals and bare crimp sleeves (P, B) for copper wire

For bare crimp terminals and bare crimp sleeves (B / P). Compact type that also supports small terminals. A crimping tool with a molding confirmation mechanism and three applicable sizes.

Comes with a molding confirmation mechanism. For bare crimp sleeves and bare terminals.