Electrical Construction Related Products

Friction resistant "Polyester 1680 denier" Lightweight and durable, it does not easily lose its shape.

Convenient for tightening mounting bolts for W3 / 8 such as Boysetter BOY □ and Onihook CBX1. * Be careful not to overtighten. * The surface treatment of electrogalvanized products will be changed from colored chromate (hexavalent) to trivalent chromate. The color of the exterior changes from gol... Read More

Made of EVA resin that is resistant to water and does not easily lose its shape. Clean and slim with no seam allowance or edging. A shape that makes it difficult for the tip of the tool to stick out.

Soft cord that is soft even in winter. Abundant variations from short to long. There are also one type of outlet and three crosses. Power tool extension cord Do not use the cord in a bundled or fixed state. Be sure to hold the plug part when inserting or removing the plug. Make sure to insert the... Read More

It is an electric work extension cord with a length of up to 1200 W and a length of 10 m. Power tool extension cord Do not use the cord in a bundled or fixed state. Be sure to hold the plug part when inserting or removing the plug. Make sure to insert the plug and body parts securely. Do not tram... Read More

A magnet attracts chips generated when drilling holes in a steel plate. You can drill holes without soiling the surrounding area. Ideal for drilling (expansion, remodeling) in the existing board. * Please wear dust-proof glasses while working. There is a risk of eye damage due to chips. * Kiriko ... Read More

Labor saving for nut threading can be performed. Lightweight and compact. It can be used for W3 / 8, M10 and W1 / 2 by using the front and back properly.

By using it for a charging impact driver or a charging drill driver, you can speedily attach the hanging bolt to the insert. Even if the driver bit breaks, it can be easily replaced and used repeatedly. Commercially available impact driver bits (65 mm or more) can be used. * Compatible with 18V c... Read More

Since it is a manual type, no power supply is required. Holes (Φ10.5) for joint fittings can be drilled in compatible cable racks and metal ducts. Since it can be inserted from the upper surface of the main girder, it is possible to drill holes in the cable rack after construction. Since the hand... Read More

It can be set in a commercially available charging impact driver. * When using a charging impact driver, stop tightening immediately after tightening the bolts. The driver bit and bolt may be damaged or deformed.

Friction resistant "Polyester 1680 denier" Lightweight and durable, it does not easily lose its shape.

Even if the driver bit breaks, it can be easily replaced and used repeatedly. Commercially available impact driver bits (75 mm or more) can be used. MAK MW-12 can use 55 mm or more. * Compatible with 18V rechargeable impact driver

It is used when storing flexible pipes in the bends of malls.

It is used when sinking the head of a nail or pulling out a protruding nail. Light and thin, it fits in your chest pocket.

You can hit it at any angle without bending the nail. Convenient for nailing in tight spaces where a mallet does not fit. Light and thin, it fits in your chest pocket. * If you hit it too much, the tip of the magnet may be crushed and damaged. * A magnet is used. Do not use in places where magnet... Read More

Covers and sheets are made of non-combustible material (flameproof). Due to its lightweight and compact design, it does not take up storage space and is convenient to carry. After cutting, the cutting powder will fall from the bottom of the case, making cleaning easy. * Please lay a curing sheet ... Read More

In combination with the replacement socket MAK1823- □, bolts and nuts in the ductor channel can be tightened. * Do not connect two or more replacement sockets to the adapter.

The steady rest channel required when pulling the wire into the wiring equipment can be processed neatly and efficiently. * Keep the tool horizontal and push it all the way to the back of the cradle to cut it out. * Do not use for materials with a thickness of more than 1.2 mm. There is a risk of... Read More

Soft leather specifications and soft touch inside prevent hand pain caused by rubbing. R-processed bottom surface and gentle radius reduce friction on clothes during work. Two-stage electric work bag. Electrician bag * Avoid using in places with high temperatures. Also, keep away from fire. If yo... Read More

For outdoor leisure Ideal for power tools with electromotive force and for tools with high power consumption Thick core wire

You can easily adjust the hole diameter and replace the cutter blade with a hexagon wrench. In addition to rigid vinyl chloride, it can also be used for plastics, new building materials, non-combustible building materials, non-combustible boards, wood, etc. * Do not use for non-compatible materia... Read More

It can be set on a commercially available ratchet handle (9.5sq.), MAK906R.

Smooth wire drawing is possible by installing a three-sided roller. Parts other than the rollers are anodized, so they have an insulating effect. The material of the roller part is made of resin so that the cable will not be damaged. For wiring extension work

Nuts can be quickly attached to the middle of the hanging bolts. The bolt stopper pin keeps the nut mounting position constant. * Be sure to insert the bolt stopper pin. Centrifugal force may cause it to pop out and cause injury. * Do not tighten the nut. It may cause tool damage. * Do not drop o... Read More

The seesaw structure makes it easy to follow the twisting of the CVT cable.

Work easily with less space and less movement. Convenient for grooving work when connecting joints. A spanner shape that is easy to set on a pipe. Efficient work is possible with the ratchet mechanism and the automatic feed mechanism for grooved rolls. * If it gets dirty with mud, wash it with wa... Read More

Used for cutting racks. Wire cutter method! It is a type that cuts by sandwiching. *We cannot deliver products directly from the manufacturer to individual homes. *Please note that this includes cases where the building name cannot be distinguished from the exterior of the building.

The master girder of the SR type cable rack can be cut. It can also cut the main girder of S-SR made of stainless steel and SD-SR cable rack made of highly corrosion-resistant plated steel plate. You can also cut the master girder of the QR type cable rack by exchanging the replacement mold. * Pl... Read More

Tilt the socket (up to 15 °) to avoid obstacles when tightening. The ratchet mechanism (with switching lever) enables quick tightening. 4 sizes of bolts and nuts can be tightened. Since the socket is through, it can be used even if the extra length of the bolt is long.

You can easily take a picture by yourself. Since the height and angle of the blackboard can be adjusted freely, it can be used at any site. It is a foldable type that is convenient to carry and store. * Please use a blackboard with a mass of 1.5 kg or less. * Please use the stand with the legs op... Read More