Electrician Tools
Electrical construction-related tools are work tools that are required when working on electrical equipment, and are used when stripping and holding the sheath without damaging the wires. The feature is that the handle is smooth and easy to grip. Various things such as one that can be done all from a single operation from crimping of the insertion terminal to stripping the coating of the wire, one with a narrow handle to make it easy to temporarily hold the terminal, one that can work with light power because it is compact There is something.
Other Related Pages
- VESSEL Wire Stripper Screw Cutter (Single Wire / Stranded Wire)The blade achieves high-precision peeling by polishing with a diamond precision grindstone. The grip comes with a conversion table for AWG, mm, and mm 2.Mass (g) 100 Overall Length (mm) 155
- HOZAN (HOZAN TOOL INDUSTRIAL) VVF stripperCompatible with VVF cable 2.0 mm x 3 cores "Measure", "Peel", "Cut", and "Bend" can be done with this single tool. Strip scale with spring for strip assist that does not easily damage the core wire coating even for unfamiliar people. With Cable exterior str... Read MoreMass (g) 210 Trusco Part No. 775-7573 RoHS directive (corresponding to 10 substances) Correspondence
- Marvel Cable stripperYou can easily peel it by turning it around. Rotational cutting and vertical cutting of the outer coating can be done simply by turning. You can strip the inner coating single wire. For peeling CV and IV lines.Compatible cable (mm2) 0.5、0.75、1.25、2.0、3.5、5.5 Trusco Part No. 116-0012 Overall Length (mm) 145 Suitable Wire 4~28mm Mass (g) 61 Material Glass fiber reinforced polyamide
- TSUNODA Cable CutterCut cables (VCT, IV wire, etc.) that are difficult to cut into a round shape with a light force!Pattern Width (mm) 47
- Rex Industries Flexible pipe stripper 32AIdeal for peeling the outer coating of flexible pipes for gas. By adopting a special blade, the stainless steel tube will not be scratched.Suitable for 8A~32A Mass (g) 80 Trusco Part No. 370-9078 Included Accessories 1 spare blade
- ESCO 0.5-6mm2 Crimping Pliers (For Ferrule Terminals)Esco Part No. EA682JC-1from S$149.90Min. 2 days
- MonotaRO Wire stripper with stopperThe coating can be peeled off without damaging the wire. Comes with a stopper. (Adjustable strip length) For wiring work such as maintenance of machines and automobiles * The blade is sharp, so do not touch it directly with your fingers.Mass (g) 240 Overall Length (mm) 170 Type IV linefrom S$33.99Min. 2 days
- Marvel Cable stripperEasy and safe strip for IV line / CV line (600V)Overall Length (mm) 194 Mass (g) 183 Performance 14、22、38、60mm2
- JEFCOM (DENSAN) Electric Works Pro Canvas HolderFriction resistant "Polyester 1680 denier" Lightweight and durable, it does not easily lose its shape.Mass (g) 145 Dimensions, Width W x Depth D x Height H (mm) 150×80×260from S$46.99Min. 2 days
- KNIPEX Crimping pliers for plugsProfessional tool for cutting and stripping telephone ribbon cables. Since the force is applied in parallel, it can be securely crimped. Equipped with a cutter for cutting 6 mm and 12 mm in length and a knife for disassembling the cable. For Western plug crimpingfrom S$129.90Min. 34 days
- Izumi Products Company Hydraulic compression tool Body chisel* Dice are sold separately.Material Steel Overall Length (mm) 380 Trusco Part No. 806-4162 Mass (kg) 17.5 Crimping Range (mm2) T122~T700 Output (ton) 30from S$2,999.00Min. 5 days
- JTC JTC 4t hand pump* 4t hand pump onlyRoHS directive (corresponding to 10 substances) Correspondence Chuck size Japanese standard: 1/4 Specification ・ With oil in the pump ・ With hosefrom S$299.90Min. 6 days
- MonotaRO Crimping Tool MiniFor mounting bare terminals and PB sleeves. For mounting bare terminals and PB sleeves * Please do not use it for any other purpose. * 0.5 / 1.25 / 2 / 3.5 / 5.5 is a Japanese standard. * 0.5 / 1.5 / 2.5 / 4.0 / 6.0 is a German standard.Mass (g) 310 Overall Length (mm) 180 Material Carbon steel Suitable Cables (mm2) 0.5/1.25/2/3.5/5.5
- LOBSTER (LOBTEX) Crimping Tool (Bare Crimp Terminal / Bare Crimp Sleeve (B / P))The steering wheel operation is also extremely light. The molding confirmation mechanism is built into the main body, and the collar is refreshing. The handle is narrower than the conventional product. Therefore, it is easy to temporarily hold the terminal with one hand. For bare crimp terminals ... Read More
- LOBSTER (LOBTEX) Mini Crimping Tool (for Crimping Bare Terminal / Bare Sleeve)A pocket size that fits softly in your hand with a lightweight and compact design. Powerful crimping with a small body. Handle load reduced by about 50%. (2mm 2 compared to conventional) Erimoto is refreshing. Molding confirmation mechanism built into the main body. For bare crimp terminals and b... Read MoreColor (Pattern) Red
- VESSEL Wire StripperA tool used to strip the vinyl coating of vinyl wires. The coating can be peeled off without damaging the wire, which is convenient and efficient.Overall Length (mm) 170 Mass (g) 350
- MonotaRO Bare Terminal, Crimping Tool for PB SleeveIt is a tool that can smoothly crimp without damaging the terminal when installing the crimp terminal. After crimping, the size of the die used is stamped on the terminal. For electrical work and wiring work * The size of JIS standard and DIN standard is written on the main body.
- HOZAN (HOZAN TOOL INDUSTRIAL) Wire StripperA wire stripper for professionals by professionals that has evolved further in pursuit of "ease of use". It is slender and fits women's hands. The stopper with a click feeling using a spring can be operated at hand and locks securely. Since the tip is pliers, it can be used for bend... Read MoreOverall Length (mm) 163 Mass (g) 80 Color Blue RoHS directive (corresponding to 10 substances) Correspondence
- ENGINEER Precision Crimping PlierThe die has a high precision and thin finish comparable to that of a special tool, making it ideal for crimping extremely small pins. High-precision crimping is possible for both the core wire and coating. The grip uses an eco-friendly elastomer. Has excellent oil resistance. With a strap hole th... Read MoreRoHS directive (corresponding to 10 substances) Correspondence Material S55C
- MonotaRO Multipurpose Wire StripperA high-performance wire stripper that can strip, cut, and crimp cables. You can easily strip from 26 to 10 AWG (0.13 to 6 mm 2 ) just by grasping the handle, so you can work continuously without stopping your hands. You can use up to 30 AWG ( 0.05 mm 2 or 8 mm 2 ) with the fine adjustment knob. F... Read MoreCompatible cable (mm2) 0.13~6 Overall Length (mm) 210 Mass (g) 370 Cutting Capacity (mm) Electric wire: 0.05 ~ 6 (30-10AWG)
- MonotaRO Wire StripperIf you insert a blade into the wire coating, only the coating can be cut and removed. The coating can be removed without damaging the core wire. * The blade is sharp, so do not touch it directly with your fingers.Mass (g) 360 Overall Length (mm) 160
- HOZAN (HOZAN TOOL INDUSTRIAL) Crimping Plier (For Insulated Closed Terminal)CE1 / CE2 and CE5 can be crimped. In addition, it is very compact and can be crimped with a light grip. An elastic, soft-touch, hand-friendly elastomer grip. You won't get tired of continuous work.Overall Length (mm) 198 Trusco Part No. 261-7421 Mass (g) 300 Range of Application CE1/CE2/CE5 RoHS directive (corresponding to 10 substances) Correspondence
- MonotaRO Wire stripperThe coating can be peeled off without damaging the wire. * The blade is sharp, so do not touch it directly with your fingers.Mass (g) 106 Overall Length (mm) 153
- FUJIYA Auto Multi StripperYou can perform crimping work of various insulated terminals and bare terminals, stripping of electric wires, and cutting work with one. For wiring work such as maintenance of machines and automobilesCompatible cable (mm2) 0.13~6 Overall Length (mm) 200 Mass (g) 340 Trusco Part No. 447-0672
- Marvel Hand press (for insulation coated crimp terminal / sleeve)Lightweight, compact and robust Crimping terminal with insulation coating. sleeve * Do not perform live-line work. * Check the compatible size with the electric wire. * Apply load until the handle opens.
- HOZAN (HOZAN TOOL INDUSTRIAL) Passing ClipTo prevent connection mistakes and assist in crimping. When connecting multiple wires, use a pass clip to group the wires together so that you can check the connection in advance before crimping and prevent incorrect connections. Even when connecting with a crimping tool using a ring sleeve, the ... Read MoreTrusco Part No. 810-7640
- Marvel Hand Press (for Crimping Bare Terminal / Sleeve)Lightweight, compact and robust Bare crimp terminal sleeve * Do not perform live-line work. * Check the compatible size with the electric wire. * Apply load until the handle opens.Suitable Terminal For bare crimp terminals / sleeves
- ARM SANGYO Arm SwagerArm swager is a crimping tool for arm and oval sleeves. Description: With cutter
- HOZAN (HOZAN TOOL INDUSTRIAL) Multi toolYou can do 7 tasks in the proficiency test with this one. Because it is palm-sized, it is easy for women to handle, and you can work reliably with less force. Due to its small size, it does not take up space inside the tool case or work desk.Dimensions, Width x Length (mm) 35×92 RoHS directive (corresponding to 10 substances) Correspondence
- MonotaRO Crimping Tool for Insulated TerminalsSince it is a small and lightweight type, you can easily perform crimping work with one hand. For terminals and sleeves with insulation coating * Please do not use it for any other purpose. * Please use the correct wire connector and wire. * Do not crimp live wires or work in the vicinity as ther... Read More
- LOBSTER (LOBTEX) Crimping Tool (for Ring Sleeve)A must-have tool for the electrician skill test !! The handle is narrower than the conventional product. About 20 cm when opened For ring sleeve (E)
- MonotaRO Crimping tool For insulated closed terminalsFor insulated closed terminals. CE1, CE2 and CE5 can be crimped. For insulated closed terminals * Please do not use it for any other purpose.Mass (g) 600 Material SCM440 (blade) Overall Length (mm) 270 Range of Application CE1/CE2/CE5 Blade strength HRC38~45
- HOZAN (HOZAN TOOL INDUSTRIAL) Crimping Tool (for Crimping Terminals with Insulation Coating)Die shape that firmly holds the wire coating. The handle opening amount adjustment mechanism enables work with a small opening width. * Notes for J.S.T.Crimping Terminal Manufacturing and Fuji Terminal Industry When the terminal name is 0.5 and the wire size is 0.2 to 0.3mm 2 , select the die acc... Read MoreSuitable for 0.3/0.5/1.25/2 Overall Length (mm) 207 Mass (g) 350 Trusco Part No. 367-8326 RoHS directive (corresponding to 10 substances) Correspondence
- Marvel Cable cutterA cutter for copper wire cables. It is light, can be worked with one hand, and can be cut cleanly without deformation of the cut surface. The cable cutter's induction hardened blade is hard, has a sharp blade, and maintains excellent sharpness. * For copper wire only
- MonotaRO Cable Cutter Ratchet TypeIt is convenient because it is a ratchet type. It is used for general electrical work, substation equipment work, communication line laying work, etc. Suitable for work such as CV / IV / SV (VVR). * Do not cut the live line. There is a risk of electric shock. * The handle is not an insulator. The... Read MoreMass (kg) 0.7 Blade strength HRC51~55 Material SKD61 Cutting capacity (mm 2 ) 240 Overall Length (mm) 250
- Marvel Wire stripperFast, easy, durable and long-lasting without damaging the core. 100% new ingot material is used for the main body. Excellent sharpness. Uses special steel for cutlery. Appropriate quenching is applied.Overall Length (mm) 180