T-Handle
- Ko-Ken (Yamashita Industrial Lab) T handleRoHS directive (corresponding to 10 substances) Correspondence
- SEK (Suekage Tool) T-shaped handle 3 minutes 300Material Chrome vanadium steel Trusco Part No. 853-1901 Square Drive (inch) 3/8 Overall Length (mm) 300
- TONE Speed T HandleA handle with a square drive at the tip of the T shape that allows quick turning. A convenient T-shaped handle that allows you to replace sockets of various sizes.
-
-
-
-
- SEK (Suekage Tool) T handle 4 minutes 300Trusco Part No. 853-1903 Material Chrome vanadium steel Overall Length (mm) 300 Square Drive (inch) 1/2
- MITLOY Speed T handleWork efficiency is improved with a fast-turning pipe. Ideal for deep places.
- Ko-Ken (Yamashita Industrial Lab) T handle (short)RoHS directive (corresponding to 10 substances) Correspondence
- Ko-Ken (Yamashita Industrial Lab) T type Torx wrenchDimension L2 (mm) 180 Dimension L1 (mm) 250 RoHS directive (corresponding to 10 substances) Correspondencefrom S$46.99Min. 5 days
- nepros (9.5SQ) T handleDimension d (mm) 10.3 Dimension l (mm) 200 Dimension L (mm) 256 Mass (g) 360 Trusco Part No. 807-0380 Square Drive (mm) 9.5
-
-
- SEK (Suekage Tool) T-shaped handle 3 minutes 450Material Chrome vanadium steel Trusco Part No. 853-1902 Overall Length (mm) 450 Square Drive (inch) 3/8from S$19.99Min. 3 days
- SEK (Suekage Tool) T handle 4 minutes 450Overall Length (mm) 450 Material Chrome vanadium steel Square Drive (inch) 1/2 Trusco Part No. 853-1904from S$21.99Min. 4 days
-
- Ko-Ken (Yamashita Industrial Lab) SQ 9. 5mm T-Type Slide Spin HandleA T-shaped handle to which a general-purpose socket can be attached. A grip that spins idly is provided on the intermediate shaft to make it easier to turn quickly. The handlebar has an oval shape and does not slip. The handlebar is removable and can be stored compactly.Overall Width (mm) 200 Overall Length (mm) 236 Square Drive (mm) 3/8"(9.5mm)SQ. Trusco Part No. 828-0318 RoHS directive (corresponding to 10 substances) Correspondencefrom S$68.99Min. 2 days
- Ko-Ken (Yamashita Industrial Lab) T-shaped handle (slide type)RoHS directive (corresponding to 10 substances) Correspondencefrom S$46.99Min. 5 days
-
- Ko-Ken (Yamashita Industrial Lab) T-type universal wrench (nut grip)Dimension L2 (mm) 200 Dimension L1 (mm) 600 RoHS directive (corresponding to 10 substances) Correspondencefrom S$76.99Min. 4 days
-
- KTC (19.0SQ) Head* Be sure to use the dedicated bar (No. BL40, BL40-500).Square Drive Size 19 Hole Diameter (Φmm) 25.5 Mass (g) 300 Outer Diameter (mm) 40 (socket) Overall Length (mm) 71 Trusco Part No. 807-0104from S$33.99Min. 5 days
-
-
- FPC Speed T handleWhen combined with a socket or hexagon socket, it can be used as a T-shaped wrench with good work efficiency. It is a speed T handle.from S$29.99Min. 8 days
- Ko-Ken (Yamashita Industrial Lab) T handle (offset)Overall Length (mm) 268 Square Drive (inch) 3/8 Square Drive (mm) 3/8"(9.5mm)SQ. Trusco Part No. 811-8041 RoHS directive (corresponding to 10 substances) Correspondencefrom S$48.99Min. 5 days
-
-
-
-
-
- DEEN Speeder T-Shaped Handle (for Both 1 / 4sq and Bit)DEEN's speeder T-type handle is newly released because the speeder part rotates smoothly. Based on the voice of DEENJ's speeder handle user, we reviewed the overall length and improved the holding power of the bit. In addition, in order to reduce rattling at the joint between the T-shaped... Read MoreTip Diameter (Φmm) 12 Square Drive Size 6.35[1/4]
- ESCO 19mm Square chuck key T type handleWidth Across Flats (mm) 19 Overall Length (mm) 200 Material Special steel (C45)from S$199.90Min. 6 days
- ESCO 1 / 4sq Slide T type handleOverall Length (mm) 116 Esco Part No. EA617XR-10 Square Drive (inch) 1/4from S$37.99Min. 4 days
-
- ESCO 17mm Square chuck key T type handleOverall Length (mm) 160 Width Across Flats (mm) 17 Material Special steel (C45)from S$169.90Min. 6 days
- Wera 416R T Type Handle RapidaptorAn ergonomic T-shaped grip that fits in the palm of your hand. It is easy to find the size and tip shape you want to use with the color code. Comes with a hole for hanging. With the unique rapidator function, you can replace the bit with one hand. Machine repair / equipment inspection / general p... Read MoreTrusco Part No. 207-5125 Shaft Length (mm) 45 Shank size (mm) 6.35 Mass (g) 61 Overall Length (mm) 89 Overall Width (mm) 99 Material Special alloy steelfrom S$49.99Min. 2 days
-
