Socket & Socket Wrench Attachments
An attachment is a tool used to connect a socket wrench handle to a socket. Attachments include extension bars, socket adapters, and universal joints. The extension bar is used to extend the length of the socket, and the socket adapter is used to connect sockets and handles with different standards and angles. The universal joint can add a swing function and is suitable for complicated work other than straight work.
Other Related Pages
MonotaRO Socket AdapterAn adapter for connecting sockets and handles with different insertion angles. * The limit torque of the adapter is based on the smaller insertion angle.Surface Treatment Chrome-plated Material Chromium vanadium steel- MonotaRO Extension BarThe socket can be extended when the handle is difficult to operate, such as when working in deep and narrow spaces. For car and motorcycle maintenance, etc. * Do not use for any purpose other than its intended purpose. * Do not hit it as a hammer to apply impact. * Do not use by adding pipes. * B... Read MoreMaterial Chromium vanadium steel
- KTC 6.3sq.extension bar21st Century Version Tool * Do not connect two or more.Dimension D2 (mm) 12 Square Drive Size 6.3
- TRUSCO Electric screwdriver impact socket adapterYou can use the impact socket by attaching it to an electric screwdriver. The hexagonal shank (6.35 mm) is press-fit type and strong. Building work, interior work, electrical workSquare Drive (mm[inch]) 12.7[1/2] Trusco Part No. 252-9726 Mass (g) 59 Shank Diameter (Φmm) 6.35 Overall Length L (mm) 66 Type Pin
- ANEX Socket adapterAdapter for socket. Can be used for wide socket sizesMass (g) 33 Width Across Flats (mm) 6.35 Surface Treatment Plating treatment Material Special alloy steel
- MonotaRO Socket Adapter For Electric Drill SetThe socket can be used with an electric drill. It is a great deal with 3 types of 6.35, 9.5 and 12.7 as a set. Impact compatible. * Be sure to wear protective goggles when working. * Not sold separately.Length (mm) 13 (shaft) Width Across Flats (mm) 6.35 Set Contents 6.35、9.5、12.7
- TONE Extension BarIt is used to extend the socket when the handle is difficult to operate, such as when working in deep and narrow areas.
-
- MonotaRO Conversion adapter with pin ring for impactAn attachment that connects sockets with different insertion angles and handles. If you have a conversion adapter, you can use your impact more widely. Fix the socket with the steel ball attached to the tip. * When using an adapter, if a large torque is applied with a wrench with a large insertio... Read MoreHardness HRc40-44 Included Accessories O-ring, pin Material SCM440 / Parker processing
- MonotaRO Universal jointYou can work diagonally at an angle. For complicated places where straight line work is not possible * Please do not use it for any other purpose.Surface Treatment Chrome-plated Material Chromium vanadium steel
- MonotaRO Color socket adapter set for electric drillThe socket can be used with an electric drill. It is a great deal with 3 types of 6.35, 9.5 and 12.7 as a set. It is easy to distinguish because it is color-coded by size. It is impact compatible. With a hexagonal shaft of 6.35 mm, it can be quickly attached to an impact driver. For assembly and ... Read MoreWidth Across Flats (mm) 6.35 Set Contents 6.35、9.5、12.7 Material Chromium vanadium steel
- TONE Socket AdapterAn adapter that connects sockets with different insertion angles and handles.Type Socket adapter
- TRUSCO Extension BarUsed to extend the socket to deep and narrow spaces. The material is chrome vanadium steel.Material Chrome vanadium steel (Cr-V) Surface Treatment Trivalent chrome plating
- MonotaRO Speed adapterA finger tip spinner that can be attached to a ratchet wrench and used for fast rotation with your fingers. Fast-turning aid when using ratchet handle * Do not use for any other purpose.
- TONE Socket Adapter for Rechargeable Electric DrillYou can use sockets of each size suitable for square drives with an electric drill. Please use for attaching and detaching bolts and nuts in various industries. * This is a rechargeable tool. Do not use for impact wrenches and vibration drills. Do not use if there are any abnormalities such as cr... Read More
- TOP KOGYO Alpha Socket Adapter for Electric DrillIt relaxes torsional stress, has twice the durability (compared to the manufacturer), and is compatible with 18V models. You can tell at a glance the size you want to use by color-coding by size using elastomer resin. The hexagonal shank is 6.35 mm and can be quickly attached to an impact driver ... Read MoreMain Unit, Outer Diameter (Φmm) 18 Shank Diameter (mm) 6.35 Torque (Nm) 75 (guaranteed) Material SCM435
- SUNDRY Socket adapter setA socket adapter set that allows you to connect sockets and handles with different insertion angles. By combining socket adapters of four sizes, it is possible to convert between 9.5 mm ⇔ 12.7 mm and 6.35 mm ⇔ 9.5 mm between the handle and socket.Material Chrome vanadium steel (chrome plating)
- TONE Quick AdapterBy attaching it between the ratchet handle and the socket, speedy fast-forwarding work is possible with your fingertips. Achieves weight reduction with an aluminum body. Knurling that is non-slip and pursues workability.
- TOP KOGYO Alpha Impact Socket Adapter Charging Tool: 18V CompatibleIt is strong against shaft breakage and relieves torsional stress. Each size of impact socket will be available. For power tool models (14.4V / 18V) with strong power. For assembly and dismantling work in narrow construction sites. "O-ring pinning type. (Socket for socket wrench cannot be in... Read MoreSquare Drive (mm) 12.7 Trusco Part No. 433-0943 Hex shaft width across flats (mm) 6.35 Mass (g) 60 Overall Length (mm) 68 RoHS directive (corresponding to 10 substances) Correspondence Material SCM435
- KTC 9.5sq.extension bar21st Century Version Tool * Do not connect two or more.Dimension D2 (mm) 17 Square Drive Size 9.5
- TOP KOGYO Universal Impact Socket AdapterBend up to a bending angle of 30 degrees
- KTC Swing extension barSwing angle about 13 degreesType Extension Bar
- TOP KOGYO One-Touch Adapter for Impact WrenchYou can use it without worrying about the socket for socket wrench falling off. The impact wrench socket can be connected with one touch without the О ring pin. For construction, civil engineering work, bicycle and mechanical equipment assembly and dismantling work.Material Special alloy steel
- TRUSCO Impact socket adapterAn adapter that converts the insertion angle of power tools such as impact wrenches.
- Tajima (TJM DESIGN) Tajima socket adapter universalA 30-degree swing type that can be used with a hand-cranked socket. Compatible with 18V impact drivers. Adapter that can use hand socket. Ideal for tightening work near corners. Abrasion resistant twin coat. Impact driver socket * This product is conductive. Please be careful about electric shock.Shank (mm) 6.35 Material (Main Unit) Chrome vanadium steel Bending Angle Up to 30 °
- TRUSCO Socket AdapterAn adapter that connects sockets with different insertion angles and handles. The material is chrome vanadium steel.Material Chrome vanadium steel (Cr-V) Surface Treatment Trivalent chrome plating
- TONE Impact Socket Adapter (Electroless Nickel Plated)It is an adapter that changes the drive angle size. Used with an impact wrench
- Tajima (TJM DESIGN) Tajima Socket AdapterFixed type that can be used with a hand-cranked socket. Compatible with 18V impact drivers. Adapter that can use hand socket. The socket can be firmly fixed and it is easy to use. Abrasion resistant twin coat. Impact driver socket * This product is conductive. Please be careful about electric shock.Shank (mm) 6.35 Material (Main Unit) Chrome vanadium steel
- KTC 9.5sq. Socket Adapter* Be careful not to put too much force.Dimension D (mm) 17 Square Drive Size 9.5
- MonotaRO Universal ball joint for impactYou can work diagonally at an angle * Pins and rings are not includedSquare Drive (mm) 12.7 Overall Length (mm) 65
- KTC 12.7sq.extension bar21st Century Version Tool * Do not connect two or more.Square Drive Size 12.7 Dimension D1 (mm) 17 Dimension D2 (mm) 22
- JEFCOM (DENSAN) Long joinerEasy extension of bits, bit drills, etc. Ideal for work in deep places. Impact compatible Easy to extend. A locking method that prevents bits from falling out. * Bits are not included. Please use commercially available ones.Overall Length (mm) 150
- KTC Universal Joint* Be careful not to apply too much force as the joint part is vulnerable to impact and twisting.Specification 21st century version Type Joint
- TOP KOGYO Flex socket adapter for electric drillsBend up to 10 degreesDimension D (mm) 16 Specification Impact compatible, shank press-fit type
- TONE Swivel Extension BarThe convex drive is spherically processed and can be used even if it is tilted 10 degrees.
- TRUSCO Swing extension barThe swing angle is 13 °. Used to extend the socket to deep and narrow spaces. The material is chrome vanadium steel.Material Chrome vanadium steel (Cr-V) Surface Treatment Trivalent chrome plating
- ANEX Super short L-shaped adapterIt is an ultra-short head 38mm (when a 15mm bit is attached) that fits in a narrow space. Lightweight and compact (main body 150g). Comes with a bit storage type fixed handle. For screwdriver and drilling work at corners and in narrow placesOverall Length (mm) 122 Mass (g) 185 Head width (mm) 38 Square Drive (mm) 6.35 Shank Diameter (mm) 6.35 Trusco Part No. 776-7226
- MonotaRO Bit Socket Adapter Drill Chuck SetSince it has a sleeve, you can work accurately by holding it when using an electric drill. Supports 18V impact. Building work, interior work, electrical work, etc. * Do not use for anything other than its intended purposeShank Diameter (mm) 6.35 Overall Length L (mm) 65
- TONE Ball jointIt is used in complicated places where straight line work is not possible.Type Joint
- JTC Universal joint for impactSquare Drive (mm) 12.7 Outer Diameter D (Φmm) 31 Overall Length (mm) 63 RoHS directive (corresponding to 10 substances) Correspondence
