Other Sockets

It is a type for shaving work by attaching a standard tap to raise screws. Made of highly durable special steel, the price is reasonable. * Do not use the tool for any purpose other than its intended purpose.

Since the shaft is a double-headed bit, even if the shaft breaks, it can be handled by simply replacing the bit. Can also be used for sockets from other manufacturers (Drive 12.7 mm)! For tightening and loosening bolts and nuts in construction, civil engineering, electrical equipment, equipment, ... Read More

Efficiently removes cement with a four-blade tip For removing peacon with cement * If depth is required (salt damage beacon), Bit Socket Long (EL-12L) has a total length of 155 mm and a depth of 110 mm.

Used for implanting stud bolts with an impact wrench. After tightening is complete, rotate the impact wrench in the reverse direction and pull out only the socket with the bolts embedded. Socket for stat bolts Uses highly durable special steel and is reasonably priced.

It can also be used for negative convex shapes such as socket slits for thumbscrews with two different width slits (grooves).

Since the socket and reaction force receiver are integrated, it is lightweight and has excellent operability.

Ideal for steel frames, light sky, equipment work, etc. It can be used by attaching it to a commercially available impact driver. For temporary tightening.

A slide socket for both slide latches.

It is a type for shaving work by attaching a standard tap to raise screws. Made of highly durable special steel, the price is reasonable.

A convenient socket that uses a new mechanism "Breakpoint PAT." That will not fall or be lost even if the bit breaks. You can safely work in high places. If excessive force is applied due to overtorque, it will always break at the "break point" inside the cover, and the "... Read More

Has excellent chemical resistance and corrosion resistance. It is lightweight because it is made of all resin. Maximum working pressure: 0.8MPa Maximum operating temperature: + 80 ℃ For applications that require chemical resistance, or when metal fittings cannot be used. When you want to reduce w... Read More

Hold the oval foam tie and turn it. Oval type (K type) foam tie only

It can be used by attaching it to the handle for impact wrench and socket wrench. For tightening wing plate bolts, anchor bolts, etc. for construction

Convenient for tightening and loosening dimension cutting bolts and light ceiling bolts. For work such as construction, civil engineering work, wooden construction, steel frame construction, etc., for tightening and loosening sizing bolts and light ceiling bolts

[Two size sockets that are frequently used into one socket!] Two sizes of sockets that are frequently used have been combined into one socket. With a depth of 57 mm, you can firmly grasp bolts and nuts for tightening and loosening work. Since the shaft of the socket adapter is a double-headed bit... Read More

It can be used in two ways: straight (fixed) and swinging. It is a bit replacement type and is economical. Architectural hardware (hole-down hardware, brace plates, etc.) can be screwed with a square bit and the socket mounting nut can be tightened with this one. For construction, civil engineeri... Read More

One rotary socket wrench can be used for tightening and loosening 7 types of bolts and nuts.

It is a socket plug-in type ultra-small and thin ratchet handle.